South Africa
  1. Home
  2. Efficiency measurement

Efficiency measurement

62 products or recommendations for Efficiency measurement
  • testo 300 kit

    testo 300 kit 1 - Flue gas analyzer (O2, CO up to 4,000 ppm)

    Order-Nr. 0564 3002 70

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, basic flue gas probe, instrument case and practical accessories.

    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2 and CO sensor up to 4,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO sensor up to 4,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument case

    ZAR 21 736.00
    excl. VAT
    Details
  • testo 300 kit

    testo 300 kit 2 - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm)

    Order-Nr. 0564 3002 72

    With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm, basic flue gas probe, instrument bag and practical accessories.

    • Fast and easy to operate: intuitive measurement menus and fast-response Smart-Touch display

    • Including O2, CO H2-compensated sensor up to 8,000 ppm

    • Large 5-inch HD display – see all the system's measuring values at a glance

    • In the kit: testo 300 flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm, mains unit, basic flue gas probe, spare dirt filters, EasyHeat software, instrument bag

    ZAR 25 168.00
    excl. VAT
    Details
  • testo 310 Set

    testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

    ZAR 14 432.00
    excl. VAT
    Details
  • testo 310

    testo 310 - Entry-level flue gas analyzer

    Order-Nr. 0563 3100

    Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 flue gas analyzer. Designed especially for use in the field.

    • Direct O2, CO, flue gas and ambient temperature measurements

    • Integrated measurement menu for flue gas, draft, CO ambient air and pressure

    • Quick sensor zero in only 30 seconds

    • Large, backlit digital display, rechargeable lithium battery with up to 10 hours life

    ZAR 11 462.00
    excl. VAT
    Details
  • flue gas probe

    Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    ZAR 5 192.00
    excl. VAT
    Details
  • Combustion air temperature probe

    Combustion air temperature probe (190 mm immersion depth)

    Order-Nr. 0600 9787

    The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

    • Flexible positioning (immersion depth 190 mm, cable length 2.2 m) 

    • Cone for attachment included

    • Measuring range: 0 to +100 °C

    ZAR 2 178.00
    excl. VAT
    Details
  • clearance-probe-for-O2-supply-air-measurement

    Dual wall clearance probe for O2 supply air measurement

    Order-Nr. 0632 1260

    The dual wall clearance probe (in combination with the appropriate measuring instrument) enables easy and reliable measurement of O2 supply air in the dual wall clearance. In addition, it can also be used to check the dual wall clearance for leaks and blockages.

    • Detection of leaks and blockages in the dual wall clearance

    • Curved probe for easy insertion into the dual wall clearance

    ZAR 2 948.00
    excl. VAT
    Details
  • Mini ambient air probe

    Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

    ZAR 1 122.00
    excl. VAT
    Details
  • 0600-9760-flue-gas-probe-modular-1

    Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    ZAR 5 082.00
    excl. VAT
    Details
  • Flue gas probe compact

    Compact basic flue gas probe, 300 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9741

    Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.

    • Flue gas path, draught path and temperature probe can be connected via a single probe coupling

    • Easy-to-replace dirt filter

    • Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

    • Includes practical cone for attachment

    ZAR 3 564.00
    excl. VAT
    Details
  • Hochdrucksonde bis 25 bar

    High-pressure probe - for pressure tests up to 25 bar

    Order-Nr. 0638 1748

    The high-pressure probe (with the appropriate measuring instrument) is ideally suited for carrying out pressure tests up to 25 bar and pressure tests on fluids.

    • Pressure tests up to 25 bar 

    • Pressure tests on fluids

    • High-pressure tests on water pipes, tests on waste water pipes according to DIN EN 1610

    • Can be attached to testo 312-4 and testo 324

    ZAR 5 962.00
    excl. VAT
    Details
  • Flue gas probe compact 180 mm 0600 9740

    Compact basic flue gas probe, 180 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9740

    Compact basic flue gas probe with 180 mm long probe shaft, integrated thermocouple and dirt filter.

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • Includes practical cone for attachment

    ZAR 3 278.00
    excl. VAT
    Details
  • 0600-9765-flue-gas-probe

    Solid fuel set (probe shaft, adapter)

    Order-Nr. 0600 9765

    The practical kit, including modular probe shaft (length 290 mm, Ø 8 mm), solid fuel adapter, cone and gas sampling hose with integrated condensate trap, means you are ideally equipped for precise solid fuel measurement.

    • Ideal for precise solid fuel measurements

    • Temperature measurements up to 300°C

    • Included in the kit: modular probe shaft with pre-filter, solid fuel adapter, cone, gas sampling hose with integrated condensate trap

    ZAR 8 470.00
    excl. VAT
    Details
  • fine pressure probe

    Fine pressure probe - for heating system checks / 4 pascal measurement

    Order-Nr. 0638 0330

    The fine pressure probe (with the appropriate flue gas analyzer and accessories) is ideally suited for carrying out heating system checks and 4 pascal measurement.

    • Carrying out heating system checks and 4 pascal measurement with compatible flue gas analyzer and accessories

    • Simultaneous measurement of gas pressure and flue gas values

    • No zero point drift during pressure measurement (cyclic zeroing)

    ZAR 5 742.00
    excl. VAT
    Details
  • Combustion air temperatur probe

    Combustion air temperature probe, immersion depth 60 mm

    Order-Nr. 0600 9797

    The probe is used for the targeted measurement of combustion air temperature in the context of flue gas or fine particle measurements.

    • Flexible positioning (immersion depth 60 mm, cable length 2.2 m)

    • Cone for attachment included in the scope of delivery

    • Measuring range: 0 to +100°C

    ZAR 2 178.00
    excl. VAT
    Details
  • PC Software testo EasyHeat

    testo EasyHeat v2.12 SP5 - PC software

    Order-Nr. 0554 3332

    Free download: PC software for graphic and tabular presentation as well as for evaluation and archiving of measurement data. Customer and measurement location data can be conveniently managed with the testo EasyHeat.

    • PC software for reading out the data from corresponding Testo measuring instruments

    • Graphic and tabular presentation of the measurement parameters

    • Administrating customer and location data

    Price on Request
    Details
  • 0600-9763-flue-gas-probe-1

    Modular flue gas probe, 300 mm, Ø 6 mm, Tmax 500°C

    Order-Nr. 0600 9763

    Modular flue gas probe with 300 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft change via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500°C

    ZAR 5 214.00
    excl. VAT
    Details
  • testo-Schnelldrucker IRDA mit kabelloser Infrarot-Schnittstelle

    testo fast printer IRDA

    Order-Nr. 0554 0549

    Use the printer with IRDA and infrared interface for fast and reliable documentation of readings.

    • Documentation of readings in black and white

    • Fast data transfer within 2 seconds

    • Out-off function

    ZAR 4 598.00
    excl. VAT
    Details
62 Products found
Show More