Government authorities

71 products or recommendations for Government authorities
  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

    ZAR 269 775.00
    excl. VAT
  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.

    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

    Price on Request
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

    Price on Request
  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.

    • User-friendly application-specific menu guide

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    Price on Request
  • testo DiSCmini - handheld measuring instrument for nanoparticle counting

    Order-Nr. 133

    Use the testo DiSCmini to monitor personal exposure to ultrafine particles (UFP) in work areas or to toxic pollutants such as diesel soot. This will enable you to minimize any risks to health.

    • Measurement and display of particle number, mean particle diameter and LSDA (Lung Deposited Surface Area) with a time resolution of 1 second.

    • Operation without solvents or radioactive radiation sources

    • Insensitive to vibrations, and operation is possible in any position

    • Long battery lifetimes of up to 8 hours

  • testo NanoMet3 - portable nanoparticle counter for Real Driving Emissions (RDE)

    Order-Nr. 444

    The innovative testo NanoMet3 PN-PEMS (particle number, portable emission measurement system) enables you to measure vehicle Real Driving Emissions – RDE.
     

    • One-button operation

    • Gas conditioning: integrated PMP thermodilution

    • Measurement method for gasoline and diesel vehicles without any additional instrument settings

    • No need for any operating resources

  • Industrial probe set 1 800 °C

    Order-Nr. 0600 7620

    The industrial probe set 1 800 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 800 °C).

    • Very easy to handle

    • Measurements in applications involving high flue gas temperatures of up to 1 800 °C

    • Additional inline filter protects the gas sampling hose from contamination

    ZAR 12 127.50
    excl. VAT
  • Industrial probe set 1 200 °C

    Order-Nr. 0600 7610

    The industrial probe set 1 200 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 200 °C) or for applications involving large flue gas pipe diameters.

    • Very easy to handle

    • Can be used in combination with testo 340 and testo 350

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Additional inline filter to protect the gas sampling hose from contamination

    ZAR 22 275.00
    excl. VAT
  • Heated industrial probe set

    Order-Nr. 0600 7630

    A heated sampling system is necessary when the situation requires maximum measuring accuracy, for instance (e.g. if there are high concentrations of NO2 or SO2 in the flue gas). For circumstances such as these, we offer our heated industrial probe set.

    • A high degree of measuring accuracy, even if the flue gas contains high concentrations of NO2 or SO2

    • Measurements in applications with flue gas temperatures of up to 600 °C

    • Short time needed to set up the heated industrial probe (ready for operation in 20 minutes maximum)

    • Very easy to handle

    ZAR 94 050.00
    excl. VAT
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • NO2/SO2 special hose (length: 2.2 m)

    ZAR 6 014.25
    excl. VAT
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    • NO2/SO2 special hose (length: 2.2 m)

    ZAR 9 677.25
    excl. VAT
  • Modular flue gas probe (335 mm, Tmax 1000 °C) with preliminary filter

    Order-Nr. 0600 8766

    The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Preliminary filter offers protection from dusty flue gases

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    ZAR 14 058.00
    excl. VAT
  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    • NO2/SO2 special hose (length: 2.2 m)

    ZAR 11 657.25
    excl. VAT
  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • NO2/SO2 special hose (length: 2.2 m)

    ZAR 7 301.25
    excl. VAT
  • Exceptionally fast temperature probe (TC Type K)

    Order-Nr. 0602 0493

    Exceptionally fast temperature probe with a large measuring range for measurements in air, liquids, pastes and on surfaces

    • TC Type K temperature probe with flexible measuring tip, short response time and 2 m cable

    • Very fast temperature measurement in air, liquids, pastes and on surfaces

    • Measuring range: -200 to +1000 °C

    ZAR 2 123.55
    excl. VAT
  • Fast-action, angled surface probe (TC type K)

    Order-Nr. 0602 0993

    Use this fast-action temperature probe to measure surface temperatures accurately and reliably, even in inaccessible areas – the angled probe tube makes this possible.

    • Fast response time (3 seconds) thanks to the thermocouple strip

    • Thermocouple type K

    • Also suitable for uneven surfaces

    • Measuring range: -60 to +300 °C

    ZAR 2 359.50
    excl. VAT
  • Fast-action surface probe (TC type K)

    Order-Nr. 0602 0393

    The extremely fast-action surface temperature probe with sprung thermocouple strip is suitable for a wide range of applications – including uneven surfaces.

    • Fast response time (3 seconds) thanks to the thermocouple strip

    • Thermocouple type K

    • Also suitable for uneven surfaces

    • Measuring range short-term up to +500°C

    ZAR 2 014.65
    excl. VAT
  • Modular flue gas probe (700 mm, Tmax 1000 °C) with preliminary filter

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Preliminary filter offers protection from dusty flue gases

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    ZAR 15 765.75
    excl. VAT
  • Flexible, fast-action immersion probe (TC type K)

    Order-Nr. 0602 0593

    Fast, flexible and waterproof: the immersion probe is ideal for carrying out accurate immersion measurements in various liquids.

    • Short response time of 2 seconds

    • Thermocouple type K

    • Waterproof

    • Very large measuring range: -60 to +1000 °C

    ZAR 1 579.05
    excl. VAT
71 Products found
Show More