-
testo 745 - Non-contact voltage tester
Order-Nr. 0590 7450
The testo 745 non-contact voltage tester is ideally suited for fast initial checking of any suspected fault sources. It filters high-frequency interference signals and has a two-stage sensitivity setting.
-
Voltage range up to 1,000 V
-
Waterproof and dustproof according to IP 67
-
Adjustable for phase detection or voltage indication
-
Visual and acoustic signal
ZAR 547.23excl. VAT -
-
testo 760-3 - Digital multimeter
Order-Nr. 0590 7603
The testo 760-3 is the most high-performance model in Testo's digital multimeter family. In addition to automatic detection of measurement parameters, it is characterized by a voltage measuring range of up to 1,000 V along with large measuring ranges for frequency and capacitance. The digital multimeter is therefore also suitable for industrial applications.-
Easy, reliable work thanks to automatic measurement parameter detection
-
Comfortable, one-handed operation without any dial
-
Voltage range up to 1,000 V
-
Additional functions, such as true root mean square measurement - TRMS, low-pass filter and temperature adapter
ZAR 3 450.66excl. VAT -
-
testo 750-3 - Voltage tester
Order-Nr. 0590 7503
The testo 750-3 voltage tester is the most high-performance model in Testo's convenient and reliable voltage tester family. In addition to the unique fibre-optic technology, the single pole voltage testing, the torch for measuring point illumination and the all-round LED display, it also has an LC display where the value currently being measured is shown.-
Clear, patented all-round LED display
-
In accordance with DIN EN 61243-3:2010 and CAT III
-
LC display showing the reading
-
RC trigger function and vibrating load buttons
ZAR 1 754.91excl. VAT -
-
testo 760-1 - Digital multimeter
Order-Nr. 0590 7601
No dial, no risk: The testo 760-1 digital multimeter gives you easier and more reliable measurement of all important electrical parameters than ever before. Assignment of the measuring sockets enables automatic detection of measurement parameters. You don't need to make any adjustments – and you can't make any mistakes.-
Easy, reliable operation through automatic measurement parameter detection
-
Prevents incorrect settings
-
Suitable for almost all electrical measuring tasks
-
Clear, illuminated display
ZAR 1 543.26excl. VAT -
-
testo 750-2 - Voltage tester
Order-Nr. 0590 7502
With the testo 750-2 voltage tester you can test electrical systems and equipment reliably and easily for voltage or de-energization thanks to the all-round LED display and unique fibre-optic technology. Compared to the testo 750-1, it is also suitable for single pole voltage testing to determine quickly whether conductors are live.-
Clear, patented all-round LED display
-
In accordance with DIN EN 61243-3:2010 and CAT III
-
With practical torch for measuring point illumination
-
Including RC trigger function and vibrating load buttons
ZAR 1 264.29excl. VAT -
-
testo 755-1 - Current/voltage tester
Order-Nr. 0590 7551
Measuring current with a voltage tester? The innovative testo 755-1 makes this possible – and is therefore suitable for virtually all daily electrical measuring tasks. The practical automated switch-on function and automatic measurement parameter detection also mean you can work more reliably than ever before with it.-
Easy, reliable operation through automatic measurement parameter detection
-
DIN EN 61243-3:2014 certified
-
Exchangeable measuring tips
-
Suitable for almost all electrical measuring tasks
ZAR 2 434.23excl. VAT -
-
testo 755-2 - current/voltage tester
Order-Nr. 0590 7552
All-in-one voltage tester and current measuring instrument: the innovative testo 755-2. A multitasker for almost all daily electrical measuring tasks. With automatic measurement parameter detection, exchangeable measuring tips and an extended voltage range up to 1,000 V.-
Simple, reliable operation with automatic selection of measurement parameters
-
DIN EN 61243-3:2014 certified
-
Single pole voltage testing to determine quickly whether conductors are live
-
Voltage range up to 1,000 V
ZAR 3 000.33excl. VAT -
-
testo 770-2 - Clamp meter
Order-Nr. 0590 7702
The innovative grab mechanism makes the testo 770-2 the perfect clamp meter for non-contact measurements on tightly packed cables with a small diameter. In addition to the standard functions of the testo 770-1 clamp meter, it also offers a temperature adapter and measures current in the µA range.-
Fully retractable pincer arm to make your work easy
-
Auto AC/DC and large two-line display
-
Measuring functions for starting current on electric motors and μA measurements
-
Temperature adapter for type K thermocouples
ZAR 2 930.46excl. VAT -
-
testo 750-1 - Voltage tester
Order-Nr. 0590 7501
Your reliable companion when it comes to testing electrical systems and equipment. The all-round LED display and unique fibre-optic technology mean the voltage indication can be seen clearly and distinctly from any position with this voltage tester.-
Clear, patented all-round LED display
-
In accordance with DIN EN 61243-3:2010 and CAT III
-
Fibre-optics for optimum voltage indication
-
Robust housing with ergonomic handle and anti-slip ring
ZAR 811.41excl. VAT -
-
testo 760-2 - Digital multimeter
Order-Nr. 0590 7602
The testo 760-2 digital multimeter is the allrounder for all important electrical measuring tasks. Thanks to the automatic detection of measurement parameters, it offers the greatest possible reliability for every application. You can also measure current in the µA range and determine the true root mean square using this digital multimeter.-
Easy, reliable work thanks to automatic measurement parameter detection
-
Current measurement in the µA range
-
True root mean square measurement - TRMS
-
Low-pass filter for accurate measurement results on frequency converter controlled motors
ZAR 2 583.66excl. VAT -
-
testo 770-1 - Clamp meter
Order-Nr. 0590 7701
The testo 770-1 clamp meter is ideally suited for non-contact current measurement on tightly packed power cables or conductors with a small diameter. The unique grab mechanism means you can grab each individual cable easily and safely.-
Fully retractable pincer arm for maximum flexibility
-
Auto AC/DC
-
Large two-line display
-
Measures the common electrical parameters
ZAR 2 236.86excl. VAT -
-
testo 770-3 - Clamp meter with Bluetooth®
Order-Nr. 0590 7703
Non-contact measurement on tightly packed cables is really easy and reliable with the testo 770-3 clamp meter. Its innovative grab mechanism will make your work easy. The most powerful model in the clamp meter series, it offers lots of additional functions for those challenging tasks that you are faced with on a daily basis, e.g. communication with the smartphone app via Bluetooth.-
Easy to operate thanks to the fully retractable pincer arm
-
Auto AC/DC and large two-line display
-
Improved TRMS method
-
Bluetooth connection to your smartphone (with the testo Smart Probes App)
ZAR 3 624.06excl. VAT -
-
Transport bag
Order-Nr. 0590 0017
You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.-
Outside: impact-resistant transport bag with zip fastener
-
Inside: two mesh compartments
-
Dimensions: 270 x 150 x 75 mm
ZAR 471.75excl. VAT -
-
Transport bag
Order-Nr. 0590 0016
You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.-
Outside: impact-resistant transport bag with zip fastener
-
Inside: two mesh compartments
-
Dimensions: 215 x 150 x 70 mm
ZAR 471.75excl. VAT -
-
Clamp meter adapter - for non-contact current measurement
Order-Nr. 0590 0003
The clamp meter adapter means you can take advantage of non-contact current measurement (with the testo 760-2/-3 digital multimeter). The clamp meter adapter is particularly suitable for measurement on tightly packed power cables or conductors with a small diameter.-
Fully retractable pincer arm – ideal for measurements in tight places
-
Direct / alternating current measurement up to 400 A AC/DC possible
-
Display of 1 mV per A
-
Overvoltage category CAT IV 600 V
ZAR 1 887.00excl. VAT -
-
Adapter for type K thermocouples
Order-Nr. 0590 0021
Use the thermocouple adapter when you want to attach a thermocouple temperature probe to your testo 770-2/-3 clamp meter.-
For attaching type K thermocouple temperature probes
-
Measuring range -20 to +500°C
ZAR 471.75excl. VAT -
-
Standard measuring cables (angled plug) - tip Ø: 2 mm
Order-Nr. 0590 0010
Rubber-coated grips mean the standard measuring cables ensure a secure hold when measuring electrical parameters. The standard measuring cables can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter.-
CAT II 1000 V measurement category
-
Tip Ø: 2 mm; tip length: 18 mm
-
1 set of measuring cables with angled plug
ZAR 358.53excl. VAT -
-
Safety crocodile clips - 1 set
Order-Nr. 0590 0008
Use the handy safety crocodile clips for easy measurement of electrical parameters. Simply put the measuring cables into the safety crocodile clip to carry out the measurement. This means your hands are free for other tasks.-
CAT III 600 V measurement category
-
Maximum current: 10 A
-
For attachment onto Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables
-
Delivery quantity: 1 set of safety crocodile clips
ZAR 358.53excl. VAT -
-
Adapter for type K thermocouples
Order-Nr. 0590 0002
Use the thermocouple adapter when you want to attach a thermocouple temperature probe to your testo 760-2/-3 digital multimeter.-
For attaching type K thermocouple temperature probes
-
Measuring range -20 to +500°C
ZAR 471.75excl. VAT -
-
Transport bag
Order-Nr. 0590 0018
You can securely store your measuring instrument and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.-
Outside: impact-resistant transport bag with zip fastener
-
Inside: two mesh compartments
-
Dimensions: 285 x 110 x 50 mm
ZAR 471.75excl. VAT -
25 Products found