1. Home
    2. testo 315-3

    testo 315-3 - CO and CO2 meter for ambient measurements

    0632 3153
    ZAR 22,183.70 ZAR 25,511.26
  1. High-precision electrochemical CO sensor, shock resistant infrared CO2 sensor
  2. Visual and audible alarm when thresholds are breached – adjustable thresholds
  3. Rugged design
  4. TÜV certified according to DIN EN 50543 standard
  5. The high-quality testo 315-3 is an easy-to-use, ruggedly designed CO and CO2 meter that enables you to carry out quick and reliable ambient measurements according to DIN EN 50543 standard.
    Cutting-edge technology, easy-to-use, rugged design. These are just a few of the features which make the testo 315-3 stand out head and shoulders above the rest. The CO andCO2 meter is designed to measure carbon monoxide and carbon dioxide parallel in heating systems and ventilation ducts. The readings are presented on an easy-to-read display. A visual and audible alarm are activated when CO/CO2 thresholds are breached. The thresholds can be adjusted to suit your range of applications.
    The intelligently designed meter has an energy-saving lithium polymer rechargeable battery and powers off automatically when not in use.
    And here’s yet another practical feature: the CO and CO2 meter for ambient measurements can also be used in combination with the testo 330-2 flue gas analyzer. The CO/CO2 readings can be transferred directly to the analyzer via the meter’s infrared interface.

    Tune up your CO and CO2 meter with a range of accessories for even more possibilities

    Your testo 315-3 is already well equipped to meet all the demands you would put on a CO and CO2 meter. The following accessories are designed to allow you to customize your meter to suit your own individual requirements:
    • TopSafe protective casing: water and dirt repellent; provides your testo 315-3 CO and CO2 meter with protection in wet and dirty conditions
    • Testo turbo printer: The testo turbo printer enables you to print out on site and provide your customers with the necessary documentation. The results are transferred to the printer via the CO and CO2 meter’s infrared interface
    • Temperature/humidity module: allows you to carry out quick and reliable temperature and humidity measurements

     

    CO and CO2 meter for ambient air measurements, USB power adaptor, cable.

    General technical data

    Operating humidity
    0 to 95 %RH
    Weight
    200 g
    Dimensions
    190 x 65 x 40 mm
    Operating temperature
    0 to +40 °C
    Protection class
    IP40 acc. to EN 60529
    Standards
    According to EN 50543
    EU-/EG-guidelines
    2004/108/EG
    Interface
    IRDA / optional Bluetooth
    Storage battery type
    Lithium polymer rechargeable battery
    Battery life
    10 h measurement time (at +20 °C/+68 °F) / Mains operation possible
    Battery charge
    In instrument via charger
    Battery charging option
    In instrument via mains unit
    Storage temperature
    -20 to +60 °C

    Accessories

  6. Accessories
    testo-Schnelldrucker IRDA mit kabelloser Infrarot-Schnittstelle
    testo fast printer IRDA
      :
      0554 0549
      ZAR 5,983.45 ZAR 6,880.97
    • Accessories
      Spare thermal paper
      Spare thermal paper for printer, permanent
        :
        0554 0568
        ZAR 662.20 ZAR 761.53
      • Accessories
        Control and adjustment set for Testo humidity probes
        Control and calibration kit for Testo humidity probes
          :
          0554 0660
          ZAR 7,236.90 ZAR 8,322.43
        • Accessories
          USB mains unit incl. cable
            :
            0554 1105
            ZAR 1,016.95 ZAR 1,169.49
          • CO / CO2 measurement in the heated environment

            Carbon monoxide (CO) is a colourless, odourless and taste-free gas, but also poisonous. It is produced during the incomplete combustion of substances containing carbon (oil, gas, and solid fuels, etc.). If CO manages to get into the bloodstream through the lungs, it combines with haemoglobin thus preventing oxygen from being transported in the blood; this in turn will result in death through suffocation. This is why it is necessary to regularly check CO emissions at the combustion points of heating systems and in the surrounding areas.

            testo 315-3

            Measuring humidity

            Humidity is an important parameter for health and comfort. Above all, relative humidity is the significant factor - it indicates the extent to which air is saturated with water vapour.

            With relative humidity of 50%, the air contains just half the maximum amount of water vapour that it could at the right temperature. At 100% relative humidity, the air is completely saturated with water vapour. If 100% saturation is exceeded, the excess moisture condenses into condensate.

            Therefore, relative humidity can indicate how fast evaporation will take place or the likelihood of condensation forming. As the evaporation of moisture through skin is determined by the relative humidity of the ambient air, the latter is an important parameter for the feeling of comfort.

            Therefore, health authorities recommend relative humidity of around 50% for living spaces and offices. However, in closed, well ventilated and well heated rooms this value is often not attained, which may have an adverse effect on breathing, skin and mucous membranes. This is particularly the case in winter, as the cold outside air only has a low absolute humidity; when this is warmed up to room temperature, the relative humidity drops dramatically. On the other hand, excessive humidity prevents proper regulation of the body temperature through sweating, and is therefore quickly experienced as being humid.

            testo 315-3