Professional flue gas analysis with testo 330-1/-2

Are you only happy with the best – especially when it comes to your tools? Then, you should get to know the testo 330-1 LX and testo 330-2 LX. Because there are basically hardly any measuring tasks on heating systems that these flue gas analyzers are not capable of dealing with. And control via App, integrated protection of sensors against wear and an extended sensor warranty make it clear why both instruments are among our bestsellers.
Ideal for: day-to-day maintenance, troubleshooting and limit value checks

15 products or recommendations for Professional flue gas analysis with testo 330-1/-2
  • testo 330-2 LL - Professional long-life set for customer service and service engineers

    Order-Nr. 0563 3372 70

    Ready to get started on the most important tasks involved in flue gas analysis on oil, gas and solid fuel systems: the testo 330-2 LL professional long-life set offers the possibility of flue gas measurement, draught, pressure and ambient CO/CO2 measurements, differential temperature measurement and gas leak detection. You get practical accessories in the flue gas analysis set (flue gas probe, hose connection set, Bluetooth printer, etc.).
    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 330-2 LL (O2 and COH2) flue gas set for service techni...

    Order-Nr. 0563 3372 71

    testo 330-2 LL (O2 and COH2) flue gas set for service technicians and inspectors, incl.BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; Testo BLUETOOTH printer with mains unit; easyheat software testo 330 for PC; USB connection cable, instrument-PC; flue gas probe, length 300 mm, Ø 8 mm, Tmax. 500 °C; fine pressure probe; capillary hoses; surface probe angled 90 °C; connection cable surface probe; straight Pitot tube; heating check retrofit CD; basic system case with double floor for instrument, probes and further accessories
  • testo 330-2 LL - Professional long-life set for heating engineers

    Order-Nr. 0563 3372 74

    The top equipment for the master heating system engineer: the testo 330-2 LL professional long-life set contains the accessories required for all the important measuring tasks on oil, gas and solid fuel systems. Further accessories mean it can be used for differential temperature measurements and gas leak detection as well.
    • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

    • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

  • testo 330-2 LL

    Order-Nr. 0563 3372 75

    Flue gas analyzer with longlife gas sensors and integrated draught and gas zeroing
  • testo 330-2 LL

    Order-Nr. 0563 3372 76

    Flue gas analyzer with longlife gas sensors and integrated draught and gas zeroing
  • testo 330-2 LL

    Order-Nr. 0563 3372 77

    Flue gas analyzer with longlife gas sensors and integrated draught and gas zeroing
  • testo 330-2 LL heating constructor's set - flue gas measurement on gas, oil and solid fuel systems

    Order-Nr. 0563 3372 78

    With the testo 330-2 LL heating constructor's set, you are equipped for the most important tasks on heating systems: The TÜV-tested flue gas analyzer testo 330-2 LL with Bluetooth interface comes with an O2 and a CO H2-compensated sensor as well as further practical accessories.
    • Included in the set: TÜV-tested testo 330-2 LL flue gas analyzer incl. O2 and CO H2-compensated sensor, Bluetooth interface, mains unit, TÜV-tested modular flue gas probe, combustion air temperature probe, infrared printer and prod instrument case

    • testo 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm

    • 4-year warranty on the user-exchangeable sensors , including sensor monitoring with a service life of up to 6 years

    • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • testo 330-2 LL (O2 and COH2) flue gas set for service techni...

    Order-Nr. 0563 3372 72

    testo 330-2 LL (O2 and COH2) flue gas set for service technicians and inspectors, incl.BLUETOOTH, rech. battery and calibration protocol; mains unit 100-240 V for mains operation or charging the rechargeable battery in the instrument; combustion air temperature probe, length 190 mm; Testo BLUETOOTH printer with mains unit; easyheat software testo 330 for PC; USB connection cable, instrument-PC; flue gas probe, length 300 mm, Ø 8 mm, Tmax. 500 °C; fine pressure probe; capillary hoses; surface probe angled 90 °C; connection cable surface probe; straight Pitot tube; heating check retrofit CD; basic system case with double floor for instrument, probes and further accessories
  • testo 330-1 LL

    Order-Nr. 0632 3306 70

    testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and with H2-compensated CO-sensor, incl. rech. battery and calibration protocol; with graphic display; version 2010
  • testo 330-2 LL - Pro flue gas analysis kit

    Order-Nr. 0632 3307

    The intelligent professional analysis tool for all measurements in and around heating systems. The TÜV-tested testo 330-2 LL flue gas analyzer comes with a wide range of user-changeable, longlife sensors that last for up to six years. Saves you from having to buy an extra measuring device – and new sensors.
    • High-quality, longlife (up to six years) O2 and CO sensors; further sensors (i.e. NO sensor) optional

    • 4-year warranty on the flue gas analyzer

    • No need to withdraw the sensor from the flue to zero

    • CO measurements up to 30 000 ppm

  • testo 330-2 LL

    Order-Nr. 0632 3307 70

    testo 330-2 LL flue gas analyzer with long-life gas sensors and built-in draugh and gas zeroing; BLUETOOTH and with H2-compensated CO-sensor; incl. rech. battery and calibration protocol; with graphic display; version 2010
  • testo 330-2 LL

    Order-Nr. 0632 3307 77

    testo 330-2 LL flue gas analyzer with long-life gas sensors; BLUETOOTH® and H2-compensated CO-sensor as well as integrated draught and gas zeroing, incl. rech. battery and calibration protocol; graphic display
  • testo 330-1 LL

    Order-Nr. 0563 3371

    testo 330-1 LL flue gas analyzer with long-life gas sensors; BLUETOOTH and with H2-compensated CO-sensor, incl. rech. battery and calibration protocol; with graphic display; version 2010
  • testo 330-1 LL - Flue gas analysis set with Bluetooth

    Order-Nr. 0563 3371 70

    This flue gas analysis set with Bluetooth means you have the appropriate equipment ready to hand and can get down to work straight away: the set has the testo 330-1 LL flue gas analyzer, case and practical accessories and is ideal for customer service and maintenance engineers.
    • Included in the set: TÜV-tested testo 330-1 LL flue gas analyzer, including O2 and CO H2-compensated sensor, Bluetooth interface, mains unit, TÜV-tested modular flue gas probe, combustion air temperature probe, pressure connection set, testo BLUETOOTH® printer and professional instrument case

    • TÜV-tested flue gas analyzer according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 to 3

    • Long-life sensors with up to 6 years' service life

    • 4-year warranty without maintenance contract

15 Products found