logo
  1. Home
  2. testo 338

testo 338 - Appareil de mesure du noircissement

0632 3381
  • Robuste et maniable
  • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number
  • Easy one-handed operation
  • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer
    • testo 338, appareil de mesure livré avec sonde de prélèvement de gaz, étui TopSafe, sacoche de transport, bloc d’alimentation et papier filtrant de rechange

    Whether you are a technician servicing diesel engines, or a manufacturer who needs to provide proof of emission values – determining the smoke count is often part of your job. With the smoke tester testo 338, you are ideally equipped for the determination of the degree of blackening in diesel engines. The easy-to-operate, handy measuring instrument records the soot concentration (mg/m3)  and the Filter Smoke Number (FSN) or Bosch number for you.


    The smoke tester testo 338: flexibly applicable and suitable for industry

    The smoke tester testo 338 provides the advantage that, as a portable instrument, it can be taken with you to the desired application site. Whether the diesel engines to be tested are in industrial plants, ships, shipyards or mines – with the testo 338, your smoke tester is always close at hand in your toolbox. This allows you to dispense with the complicated installation of stationary measurement systems.

    Especially before commissioning or after servicing diesel engines, a measurement of the smoke count is recommended. This allows you to determine whether the injection is correctly adjusted or whether there are interior engine problems. However, for proof of emission values, it is also often necessary to determine the degree of blackening – for example in mining or shipping, in order to fulfil special environmental stipulations or for testing diesel particle filters. The manufacturers of diesel engines must also meet the requirements of their customers, and provide proof of this. With the testo 338, the first mobile smoke tester with direct data analysis, you are ideally equipped for these applications.

    The tab "Applications" provides more information on the application of the testo 338 in the following areas:
     

    • Commissioning and servicing diesel/industrial engines
    • Diesel engine manufacturing
    • Shipping companies and dockyards
    • Mining and prospecting
    • Construction machines and land-moving vehicles
       

    Smoke counter with innovative technology and high user-friendliness

    Start up, measure, understand – no action is superfluous. This is how easy smoke count measurement can be. And how fast. Because the compact testo 338 frees you from handpumps and complicated comparative tables. As the first portable smoke tester, it automatically displays the degree of blackening without needing to use complex analysis electronics.

    Thanks to the easy operation of the testo 338, the measurement of degree of blackening is possible without extensive training. The smoke tester directly shows you optionally either the Filter Smoke Number (FSN) or the Bosch number. The instrument also gives the soot concentration. Apart from this, you can also create a connection via infrared interface to the optionally available Testo fast printer, and print out the measurement data easily on site.


    What’s included

    Smoke counter testo 338, including gas sampling probe, TopSafe, mains unit and instrument case.

    Données techniques générales

    Indice de protection
    IP 40, TopSafe
    Interfaces
    IRDA / en option : Bluetooth®
    Mémoire
    200 Valeurs de mesure
    Type d'accumulateur
    Lithium-Ion
    Autonomie
    Env. 4h en fonctionnement continu
    Température d'utilisation
    Mesures ponctuelles jusqu’à +500 °C
    Surpression max. gaz de combustion
    300 mbar*
    Volume des échantillons de mesure
    0,4 litre (étendue : 0 à 0,3 FSN); 0,2 litre (étendue : 0,2 à 2 FSN)
    Mesure du débit
    Capteur de pression différentielle
    Capteur optique
    Opacité de la charge du filtre en %
    Durée de mesure
    ˂ 60 sec. par cycle de mesure
    *L’imprécision de mesure augmente lorsque les pressions sont supérieures.

    Mesure du degré de noircissement concentration de suie

    Étendue de mesure
    0 à 70 mg/m³
    Résolution
    0,01 mg/m³
    Répétition
    < 1,25 mg/m³ +5 % v.m. (5 à 70 mg/m³)
    < 1,5 mg/m³ (0 à 5 mg/m³)

    Diesel engine manufacturing

    Manufacturers of diesel engines often need to meet the customer's requirement of proof of the degree of blackening of the engine. This value is sometimes even documented in the purchase contract. For the purposes of diesel engine acceptance, you can record the degree of blackening with the smoke tester testo 338, and provide your customer with corresponding proof. If your customer wishes for a printout of the measurement data, this too can be provided directly at the measurement site with the optionally available Testo fast printer.

    testo 338

    Lifting vehicles

    Diesel forklift trucks and earth-moving equipment must be regularly tested and serviced, sometimes even according to legislation or cooperative regulations, e.g. TRGS 554 in Germany – especially if they are working in closed rooms. A smoke tester is ideal for testing the Bosch number on diesel engines in forklift trucks and earth-moving equipment.

    Mining and prospecting

    In mining, there are stipulations set by law or by professional cooperatives (e.g. the BGR 160 in Germany), which prescribe certain limit values for degree of blackening and the intervals for testing diesel engines. Limited fresh air supply means that the adherence to prescribed emission values in mines is crucial. Otherwise this can lead to health risks for the workers. For this reason, regular smoke count measurements are either compulsory or at least strongly recommended.

    Shipping companies and dockyards

    On ships, as little visible smoke should be produced as possible, and the soot content kept to a minimum. A high soot content on deck can lead to the danger of soot deposits on the passengers. In order to test whether the smoke count of marine diesel engines does not exceed the prescribed limit values, shipping companies (and port authorities) can use a smoke tester. Use of the instrument provides clarity regarding the smoke values.

    In shipbuilding, the smoke count also plays an important part. After individual components have been assembled (engine, diesel particle filter, exhaust pipe), the soot emissions should be tested. In addition to this, for environmental reasons the customers often make demands regarding the emission values, and require proof of the soot emission in the diesel exhaust. The correct functioning of the diesel particle filter can also be testing using a degree of blackening measurement.

    testo 338

    Tests before the commissioning and servicing of diesel engines

    The degree of blackening of diesel engines should be measured before commissioning and after servicing. With this measurement, you can for example test whether the fuel injection is correctly adjusted, and identify and remedy interior engine problems early. You as a service technician can carry the handy smoke tester testo 338 easily with you as you travel from job site to job site in order to carry out these measurements.

    testo 338