Buildings & construction - Velocity measurement

Use the testo 405 thermal anemometer to measure air velocity, volumetric flow and air temperature. It is suitable for carrying out quick check measurements in ventilation ducts and for measuring the air velocity in rooms, e.g. at draughty windows.

• Measurement of air velocity, volumetric flow and air temperature

• For measurements in ventilation ducts and in rooms

• Particularly precise in the range between 0 and 2 m/s

• Telescope extendible to 300 mm

The testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.

• Vane anemometer with permanently installed 40 mm vane

• Measurement of air velocity and air temperature

• Calculates wind chill and the Beaufort wind force

• Practical: with single-point averaging, max/min and Hold function

Vane anemometer with telescopic sensor – ideal for carrying out airflow measurements in air ducts.

• Permanently connected telescopic sensor – maximum length 890 mm, diameter 16 mm

• Airflow measurements, selective and time mean values for calculating air volume

• Hold function; min/max display; auto power off

• Calibration certificate and batteries included

The testo 417 vane anemometer allows you to carry out quick and precise measurements at air inlets and outlets. The easy-to-read display shows air flow speed and direction as well as volumetric flow rate and temperature. The meter can also calculate the mean time value, average value and minimum and maximum value at the touch of a key.

• Compact anemometer with integrated 100 mm vane

• For measuring air flow, volumetric flow rate and temperature

• Ideal for carrying out measurements at air inlets and outlets

• For carrying out measurements at disk valves, ventilation grilles and ceiling diffusers using optionally available accessories

The functional testing of ventilation and air conditioning systems includes monitoring the flow speed in ventilation ducts. If the air flow velocity and volumetric flow are not set correctly, the room air quality may suffer. The testo 425 thermal anemometer measures the flow speed and automatically calculates the volumetric flow.

• Temperature and flow measurement as well as volumetric flow calculation

• Permanently attached extendible telescopic probe – maximum length 820 mm, diameter 7.5 mm

• With single and multi-point averaging

• Hold function, display of min/max value, Auto-off function

Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.

• Permanently installed vane with a diameter of 40 mm

• Measurement of air velocity, air temperature and humidity

• Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force

• Includes single-point averaging, max/min and Hold function

testo 435 is a series of multi-function climate measuring instruments made by Testo. The testo 435-1 version is the entry-level measuring instrument in this series. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess air quality. For this we offer you a comprehensive range of optional probes and sensors to choose from.

• You have the option of connecting thermal anemometers and vane anemometers for measuring air velocity and volumetric flow in ventilation ducts

• Air quality: measurement of CO₂, air humidity, air temperature and absolute pressure with the optional IAQ probe

• Display of dew point distance, min., max. and mean values

• Illuminated display

Cold storage rooms, cold storage warehouses, outdoors: the testo 110 digital temperature meter shows what it’s really made of when temperatures start to drop. Thanks to the NTC technology tucked away inside, it can measure temperatures in very low temperature environments.

• Extremely accurate, also in very low temperature ranges, i.e. cold storage rooms

• Optional connectable temperature sensor and wireless sensor for different applications in the field

• Audible alarm, user-defined thresholds

• HACCP compliant, certified according to EN 13485 for use in the food sector

You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

• Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

• Internal reading memory for up to 3,000 readings

• Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

• Automatic mean value calculation and determination of the volume flow

testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.

• Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

• Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO₂, absolute pressure and temperature

• Display of dew point distance, min., max. and mean values

• Illuminated display

You can use the testo 465 tachometer for quick and easy rpm measurement on rotating parts such as fans and shafts.
 

• Extremely easy one-handed operation

• Saves mean/max./min. values, as well as the last measuring value

• Robust tachometer – thanks in particular to the protective case (SoftCase) supplied

• Includes reflective markers

One tachometer, multiple measurements: The testo 470 tachometer carries out rpm measurements on motors, shafts, fans, etc., but that’s not all. With this handy instrument, you can also determine speeds and lengths (e.g. of conveyor belts and rotors). 

• Simple one-hand operation

• Measurement of rpm, speeds and lengths

• Storage of mean, max. and min. values as well as the last reading 

• Includes accessories such as reflective markers, protective case and transport case

Get the testo 417 vane anemometer with integrated 100 mm vane now, in a set that includes two measurement funnels, a volume flow straightener and other accessories. This ideally equips you to carry out volume flow measurement at plate outlets, ventilation grilles and swirl outlets.

• testo 417 vane anemometer for measuring air flow velocity, volume flow and temperature

• Attachable measurement funnels make this ideal for measuring volume flow at ventilation outlets

• Also suitable for swirl outlets: thanks to the flow straightener, precise measurements can also be taken at swirl outlets

• Important accessories included in the set: measurement funnels, flow straightener and a bag for storage

Make sure you get the testo 420 volume flow hood for larger ceiling outlets and at the same time enjoy multiple maintenance benefits on HVAC systems. Because the flow hood with the removable measuring instrument is not only exceptionally light, it also guarantees accurate volume flow calculations at swirl outlets

• Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity

• Impressively light with a weight of 2.9 kg

• Precise measurement even at swirl outlets thanks to integrated volume flow straightener

• Fast set-up, convenient operation and protocol creation on site using the App

Ideal for rpm measurement and for the inspection of parts moving at high frequencies: the testo 476 hand-held stroboscope with high-intensity light.

• High adjustment accuracy and stability thanks to dynamic setting dial

• High light intensity thanks to high-performance xenon flashlamp

• Powerful Li-Ion rechargeable battery pack for at least 2 hours of continuous operation

• Extremely short flash duration (< 9 µs)

You can use the testo 435-2 multifunction measuring instrument to carry out all the measurements you need to adjust ventilation and air conditioning systems and assess indoor air quality. You have many optional sensors and probes to choose from which you can attach to the climate measuring instrument. This set already provides you with several probes and with accessories.

• testo 435-2 multifunction measuring instrument for the adjustment and testing of air conditioning and ventilation systems

• Several attachable probes included in the set (vane probes, temperature/humidity probes)

• Additional optional probes available for a really wide range of measuring purposes

• Large instrument memory for up to 10,000 readings

Inspections and quality control of machines and systems, rotational speed measurements of hard-to-reach, small and fast-moving objects. And all while the machines are still running. No problem. No problem at all. With the testo 477 LED stroboscope.

• Extremely high measurement range: up to 300 000 flashes per minute (fpm)

• Very high illumination: up to 1 500 Lux

• Long operating times: battery power for up to 5 h

• Trigger input and output for connectivity to external systems and control via external sensor

Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.

• High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

• High-precision, integrated pressure sensor included

• Pro-software for easy and efficient analysis and logging included

• Intelligent calibration concept

Versatility comes with the set: the testo 830-T4 IR thermometer, including practical protective leather sleeve and a cross-band surface probe for precise contact measurement on different surfaces. This means you are flexibly equipped for the professional measurement of surface temperatures.

• 2-point laser marking for precise display of the measuring point

• 30:1 optics also enable the accurate measurement of small objects at a distance

• Easy to handle gun-style design

• Limit value control with min./max. function along with visual and acoustic signal

The testo 830-T2 infrared thermometer can be used for carrying out non-contact temperature measurements. The kit includes a cross-strip/surface temperature sensor for carrying out control measurements or for measuring materials with low degrees of emission.

• Testo 830-T2 infrared thermometer

• Quick response surface temperature sensor with spring-mounted cross-strip

• Leather protective case

• Ideal for trade and industry