Building materials

Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

• Measures O₂, CO, NOx (NO + NO₂ separate), SO₂ – high precision and long-term stable

• Certified gas sensors: equal to reference measurement

• Ready to measure after only two minutes

• Determination of the fuel sulphur content by means of SO₂/CO₂ ratio according to MEPC 184 (59)

Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.

• Can measure CO, COlow, NO, NO_low, NO₂ or SO₂

• Extended measuring range for use in environments with high gas concentrations

• Precalibrated gas sensors for quick and easy sensor change

• Integrated pressure difference and air flow measurements for mass flow calculations

The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

• Increased measurement range for unlimited measurements even when gas concentrations are higher

• Easy-to-change gas sensors and easy access to wearing parts

• Sealed housing with built-in impact protection for use in harsh conditions

• Automatic processing of measuring programmes over a longer period

The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.

• User-friendly application-specific menu guide

• testo 350 Analysis Box just as easy to use when not positioned at measurement site

• Internal memory for receiving measurement data from the Analysis Box

• Large graphic color display, robust, industrial-type housing

The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C

• Made of metal: no melting of the handle due to radiated heat from the flue gas duct

• Additional particle filter in the hose provides protection from contamination

• Temperature measurement possible with optional thermocouple

• Probe shaft is easy to replace

The flue gas probe from Testo makes it possible to carry out efficient flue gas measurements on industrial engines. In the case of diesel engines, the permanently welded-on preliminary filter provides protection from diesel particulates. It can be used at flue gas temperatures of up to 1,000 °C

• Useful for measurements on diesel engines: preliminary filter provides protection from diesel particulates

• Made of metal: no melting of the handle due to radiated heat from the flue gas duct

• Additional particle filter in the hose provides protection from contamination

• Temperature measurement possible with optional thermocouple

The industrial probe set 1 200 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 200 °C) or for applications involving large flue gas pipe diameters.

• Very easy to handle

• Can be used in combination with testo 340 and testo 350

• Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

• Additional inline filter to protect the gas sampling hose from contamination

The industrial probe set 1 800 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 800 °C).

• Very easy to handle

• Measurements in applications involving high flue gas temperatures of up to 1 800 °C

• Additional inline filter protects the gas sampling hose from contamination

A heated sampling system is necessary when the situation requires maximum measuring accuracy, for instance (e.g. if there are high concentrations of NO₂ or SO₂ in the flue gas). For circumstances such as these, we offer our heated industrial probe set.

• A high degree of measuring accuracy, even if the flue gas contains high concentrations of NO2 or SO2

• Measurements in applications with flue gas temperatures of up to 600 °C

• Short time needed to set up the heated industrial probe (ready for operation in 20 minutes maximum)

• Very easy to handle

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated thermocouple probe for temperature measurements up to 1000 °C

• NO₂/SO₂ special hose (length: 2.2 m)

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated thermocouple probe for temperature measurements up to 1000 °C

• NO₂/SO₂ special hose (length: 2.2 m)

The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Preliminary filter offers protection from dusty flue gases

• Integrated thermocouple probe for temperature measurements up to 1000 °C

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Integrated thermocouple probe for temperature measurements up to 500 °C

• NO₂/SO₂ special hose (length: 2.2 m)

Fast-reaction paddle surface probe, for measurements in inaccessible places, e.g. narrow apertures and slots, TC Type K

The extremely fast-action surface temperature probe with sprung thermocouple strip is suitable for a wide range of applications – including uneven surfaces.

• Fast response time (3 seconds) thanks to the thermocouple strip

• Thermocouple type K

• Also suitable for uneven surfaces

• Measuring range short-term up to +500°C

Fast, flexible and waterproof: the immersion probe is ideal for carrying out accurate immersion measurements in various liquids.

• Short response time of 2 seconds

• Thermocouple type K

• Waterproof

• Very large measuring range: -60 to +1000 °C

Exceptionally fast temperature probe with a large measuring range for measurements in air, liquids, pastes and on surfaces

• TC Type K temperature probe with flexible measuring tip, short response time and 2 m cable

• Very fast temperature measurement in air, liquids, pastes and on surfaces

• Measuring range: -200 to +1000 °C

Accurate, waterproof and versatile: the temperature probe measures surface temperatures of up to 1000 °C. Its small measuring head is ideal for carrying out measurements on flat surfaces. Short response time.

• Low-mass probe: very short response time for accurate measurement results

• Thermocouple type K

• Waterproof

• Very large measuring range: -60 °C to +1000 °C

The globe thermometer is suitable for the measurement of radiant heat – e.g. in the context of standard-compliant comfort level measurement at the workplace.

• For the measurement of radiant heat according to ISO 7243, ISO 7726, DIN EN 27726 and DIN 33403

• Thermocouple type K 

• Measuring range: 0 to + 120 °C

The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

• Easy probe shaft replacement via quick-change click system

• Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

• Preliminary filter offers protection from dusty flue gases

• Integrated thermocouple probe for temperature measurements up to 1000 °C