Our flexible flue gas probe helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).

Modular flue gas probe, probe length 300 mm, diameter 6 mm, with cone. The testoFix probe holder is available for this probe as an optional accessory. Use this to attach the flue gas probe to the flue gas pipe quickly and securely. The probe hose is shorter (650 mm) and more flexible than before, to make your work easier.

Modular flue gas probe with a probe length of 300 mm and a diameter of 8 mm, with a cone for attaching it in the measurement aperture. However, the flue gas probe can also be securely and reliably attached to the flue gas pipe using the optional testoFix probe holder. The hose between probe and measuring instrument is shorter and more flexible than before, which makes set-up and dismantling significantly easier.

Modular flue gas probe, probe length 180 mm, diameter 6 mm, with a cone for attaching it in the measurement aperture. However, you can also attach this flue gas probe to the flue gas pipe securely and reliably using the testoFix probe holder. New: short, flexible hose for easier handling. &nbsp;

Modular flue gas probe with a probe length of 180 mm and a diameter of 8 mm, including cone and short, flexible hose for straightforward set-up and dismantling. This flue gas probe can also be attached to the flue gas pipe using the optional testoFix probe holder.

Modular flue gas probe with 300 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

T&Uuml;V-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 335 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 700 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

T&Uuml;V-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

Modular flue gas probe with 180 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

Radove instalacije i održavanja na sustavima grijanja obavljajte nekoliko puta dnevno koristeći uređaj za analizu dimnih plinova s dugotrajnim senzorima. T&Uuml;V-testirani testo 300 dugotrajni uređaj za analizu dimnih plinova isporučuje se sa O2 and CO H2senzorom koji prepoznaje do 30.000 čestica u minuti (NO - moguće ponovno postavljanje), T&Uuml;V-testirana modularna sonda za dimne plinove, testo Bluetooth&reg; konektor, kovčeg i praktična dodatna oprema.

Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The T&Uuml;V-tested testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm (NO - can be retrofitted), T&Uuml;V-tested modular flue gas probe, testo Bluetooth&reg; printer, testo Bluetooth&reg; Connector, case and practical accessories.

Carry out installation and maintenance work on heating systems several times a day using the flue gas analyzer with Longlife sensors. The T&Uuml;V-tested testo 300 NEXT LEVEL Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 30,000 ppm (NO - can be retrofitted), T&Uuml;V-tested modular flue gas probe, testo Bluetooth&reg; Connector, testo Bluetooth&reg; printer, testo Bluetooth&reg; Connector, case and practical accessories.

Radove instalacije i održavanja na sustavima grijanja obavljajte nekoliko puta dnevno koristeći uređaj za analizu dimnih plinova s dugotrajnim senzorima. T&Uuml;V-testirani testo 300 dugotrajni uređaj za analizu dimnih plinova isporučuje se sa O2 and CO H2senzorom koji prepoznaje do 8.000 čestica u minuti (NO - moguće ponovno postavljanje), T&Uuml;V-testirana modularna sonda za dimne plinove, testo Bluetooth&reg; konektor, kovčeg i praktična dodatna oprema.

The testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.

Everything you need to carry out efficient servicing and commissioning of heating systems using the testo 330i flue gas analyzer &ndash; in one compact set.

General technical data	Weight 12 g
	Dimensions height: 2,9 mm, ø: 29,7 mm
	Product colour white

Registracija proizvoda

Download

kompetencija@optimum

testo Smart aplikacija

O tvrtki Testo

Spare particle filter, 10 off

Spare particle filter, 10 off

General technical data

General technical data