High-temperature vane anemometer probe Ø 16 mm with telescope

型番  0635 9552

  • Vane anemometer probe measures air velocity, volumetric flow and temperature

直径Φ16mmの小型ヘッドのベーンプローブは+140℃までの風速、風量測定に適しています。プラントなどのダクト内風速と温度を同時に測定します。

製品の詳細

Use the digital vane anemometer probe in combination with the testo 480 climate measuring instrument (optional) to measure air velocity and volumetric flow in ventilation ducts. The vane anemometer probe's wide temperature range of up to +140 °C means that you can also use it in hot process air and in industrial ventilation systems.

Key features of the digital vane anemometer probe

  • Measuring range: Air velocity from 0.6 to 50 m/s; temperature from -30 to +140 °C (probe head)
  • Telescope: The probe is equipped with a stable, non-rotatable telescope. When extended, the maximum length of the telescope is 960 mm. Thanks to the scaling on the telescope, the immersion depth can be read off easily.
  • Measurement button: A measurement button is located on the handle of the vane anemometer probe. Use this measurement button to directly trigger the storage of air velocity and volumetric flow readings. These readings are then immediately stored and displayed in the testo 480 climate measuring instrument. The benefits offered by the measurement button are two-fold: you will find the probe easier to handle during the measurement and you also get accurate measurement data. This is because the testo 480 climate measuring instrument can be attached to the ventilation duct during the measurement. You just need to make sure that the vane anemometer probe is ideally positioned in the duct and – courtesy of the practical measurement button – store the respective maximum air velocity or volumetric flow value right away.
  • Digital principle: Since the probe is digital, this eliminates the measurement uncertainty of the testo 480 climate measuring instrument. This means you can benefit from accurate measurement results.

The vane anemometer probe with intelligent calibration concept

Thanks to an intelligent calibration concept, the vane anemometer probe is impressive when used in combination with the testo 480 climate measuring instrument. Any ISO or DAkkS calibration deviations identified are stored directly in the probe. So you get a zero-error display. The intelligent calibration concept includes the following steps:

  1. Calibration reminder: the digital probe notifies the testo 480 climate measuring instrument as soon as the next calibration is due. Our recommendation: calibration 1 × per year.
  2. Probe calibration: Subsequently you can have the probe calibrated, e.g. at Testo Industrial Services. There is no need to send in the testo 480 climate measuring instrument either. This means that the measuring instrument can be used with the greatest possible flexibility.
  3. Enter the calibration data: You can now enter the calibration deviations from the calibration certificate using the EasyClimate software (included with the testo 480). These are therefore stored in the probe permanently.
  4. Zero-error display: The probe takes calibration deviations into account automatically (i.e. the probe's reading is adjusted by the measurement deviation from the certificate), thereby generating a zero-error display in the testo 480 measuring instrument. Your system, which consists of measuring instrument and probe, delivers measurement results that are reliable and reproducible.

 

同梱品

温度センサ付きベーンプローブ (Ø 16 mm) 、検査出荷書
注: 専用ケーブル (0430 0100) が別途必要です。
NTC

測定範囲

-30 ~ +140 °C

精度

±(2.5 °C + 測定値 の 0.8%)

分解能

0.1 °C

風量

測定範囲

+0.6 ~ +50 m/s

精度

±(0.2 m/s + 測定値 の 1%) (0.6 ~ 40 m/s)

±(0.2 m/s + 測定値 の 2%) (+40.1 ~ 50 m/s)

分解能

0.1 m/s

一般テクニカルデータ

長さ

960 mm

直径

16 mm

アクセサリ

デジタルプローブ用プラグインヘッドケーブル

製品の詳細および型番 0430 0100

¥8,400
税込  ¥9,240