Spanning

De eerste meetinstrumenten met een all-round LED display. Mede hierdoor kan het display vanuit iedere positie uitgelezen worden. Alle drie de voltmeters voldoen aan de laatste richtlijnen en beschikken over een veiligheidsspecificatie conform de CAT4.

23 Producten of adviezen voor Spanning
  • testo 745 - Non-contact voltage tester

    Bestelnr. 0590 7450

    The testo 745 non-contact voltage tester is ideally suited for fast initial checking of any suspected fault sources. It filters high-frequency interference signals and has a two-stage sensitivity setting.

     
    • Voltage range up to 1,000 V

    • Waterproof and dustproof according to IP 67

    • Adjustable for phase detection or voltage indication

    • Visual and acoustic signal

    € 29,00
    € 35,09 inclusief btw, Bebat en Recupel
  • testo 750-1 - Voltage tester

    Bestelnr. 0590 7501

    Your reliable companion when it comes to testing electrical systems and equipment. The all-round LED display and unique fibre-optic technology mean the voltage indication can be seen clearly and distinctly from any position with this voltage tester. 
    • Clear, patented all-round LED display

    • Volgens NEN-EN-IEC 61243-3:2010 en CAT III

    • Lichtgeleider voor optimale spanningsherkenning

    • Robust housing with ergonomic handle and anti-slip ring

    € 43,00
    € 52,03 inclusief btw, Bebat en Recupel
  • testo 750-2 - Voltage tester

    Bestelnr. 0590 7502

    With the testo 750-2 voltage tester you can test electrical systems and equipment reliably and easily for voltage or de-energization thanks to the all-round LED display and unique fibre-optic technology. Compared to the testo 750-1, it is also suitable for single pole voltage testing to determine quickly whether conductors are live.
    • Clear, patented all-round LED display

    • In accordance with DIN EN 61243-3:2010 and CAT III

    • With practical torch for measuring point illumination

    • Including RC trigger function and vibrating load buttons

    € 67,00
    € 81,07 inclusief btw, Bebat en Recupel
  • testo 755-1 - Current/voltage tester

    Bestelnr. 0590 7551

    Measuring current with a voltage tester? The innovative testo 755-1 makes this possible – and is therefore suitable for virtually all daily electrical measuring tasks. The practical automated switch-on function and automatic measurement parameter detection also mean you can work more reliably than ever before with it. 
    • Easy, reliable operation through automatic measurement parameter detection

    • DIN EN 61243-3:2014 certified

    • Exchangeable measuring tips

    • Suitable for almost all electrical measuring tasks

    € 129,00
    € 156,09 inclusief btw, Bebat en Recupel
  • testo 750-3 - Voltage tester

    Bestelnr. 0590 7503

    The testo 750-3 voltage tester is the most high-performance model in Testo's convenient and reliable voltage tester family. In addition to the unique fibre-optic technology, the single pole voltage testing, the torch for measuring point illumination and the all-round LED display, it also has an LC display where the value currently being measured is shown.
    • Clear, patented all-round LED display 

    • In accordance with DIN EN 61243-3:2010 and CAT III

    • LC display showing the reading

    • RC trigger function and vibrating load buttons

    € 93,00
    € 112,53 inclusief btw, Bebat en Recupel
  • testo 755-2 - current/voltage tester

    Bestelnr. 0590 7552

    All-in-one voltage tester and current measuring instrument: the innovative testo 755-2. A multitasker for almost all daily electrical measuring tasks. With automatic measurement parameter detection, exchangeable measuring tips and an extended voltage range up to 1,000 V. 
    • Simple, reliable operation with automatic selection of measurement parameters

    • DIN EN 61243-3:2014 certified

    • Single pole voltage testing to determine quickly whether conductors are live

    • Voltage range up to 1,000 V

    € 159,00
    € 192,39 inclusief btw, Bebat en Recupel
  • Transport bag

    Bestelnr. 0590 0017

    Robuuste metertas met rist is gemaakt van verstevigd materiaal. Aan de binnenzijde voorzien aan beide kanten van handige steekvakken voor meter en verschillende toebehoren.
    • Outside: impact-resistant transport bag with zip fastener

    • Inside: two mesh compartments

    • Dimensions: 270 x 150 x 75 mm

    € 25,00
    € 30,25 inclusief btw, Bebat en Recupel
  • Transport bag

    Bestelnr. 0590 0016

    Robuuste metertas met rist is gemaakt van verstevigd materiaal. Aan de binnenzijde voorzien aan beide kanten van handige steekvakken voor meter en verschillende toebehoren.
    • Outside: impact-resistant transport bag with zip fastener

    • Inside: two mesh compartments

    • Dimensions: 215 x 150 x 70 mm

    € 25,00
    € 30,25 inclusief btw, Bebat en Recupel
  • Clamp meter adapter - for non-contact current measurement

    Bestelnr. 0590 0003

    The clamp meter adapter means you can take advantage of non-contact current measurement (with the testo 760-2/-3 digital multimeter). The clamp meter adapter is particularly suitable for measurement on tightly packed power cables or conductors with a small diameter.
    • Fully retractable pincer arm – ideal for measurements in tight places

    • Direct / alternating current measurement up to 400 A AC/DC possible

    • Display of 1 mV per A

    • Overvoltage category CAT IV 600 V

    € 100,00
    € 121,00 inclusief btw, Bebat en Recupel
  • Standard measuring cables (angled plug) - tip Ø: 2 mm

    Bestelnr. 0590 0010

    Rubber-coated grips mean the standard measuring cables ensure a secure hold when measuring electrical parameters. The standard measuring cables can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter.
    • CAT II 1000 V measurement category

    • Tip Ø: 2 mm; tip length: 18 mm

    • 1 set of measuring cables with angled plug

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Safety crocodile clips - 1 set

    Bestelnr. 0590 0008

    Use the handy safety crocodile clips for easy measurement of electrical parameters. Simply put the measuring cables into the safety crocodile clip to carry out the measurement. This means your hands are free for other tasks.
    • CAT III 600 V measurement category

    • Maximum current: 10 A

    • For attachment onto Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables

    • Delivery quantity: 1 set of safety crocodile clips

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Transport bag

    Bestelnr. 0590 0018

    Robuuste metertas met rist is gemaakt van verstevigd materiaal. Aan de binnenzijde voorzien aan beide kanten van handige steekvakken voor meter en verschillende toebehoren.
    • Outside: impact-resistant transport bag with zip fastener

    • Inside: two mesh compartments

    • Dimensions: 285 x 110 x 50 mm

    € 25,00
    € 30,25 inclusief btw, Bebat en Recupel
  • Standard measuring cables (angled plug) - tip Ø: 4 mm

    Bestelnr. 0590 0011

    Rubber-coated grips mean the standard measuring cables ensure a secure hold when measuring electrical parameters. The standard measuring cables can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter.
    • CAT II 1000 V measurement category

    • Tip Ø: 4 mm; tip length: 18 mm

    • 1 set of measuring cables with angled plug

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Crocodile clips - 1 set

    Bestelnr. 0590 0009

    Use the crocodile clips for clamping the cable when measuring electrical parameters. Simply put the measuring cables into the crocodile clip. This means your hands are free for other tasks during measurement.
    • CAT IV 600 V / CAT III 1000 V measurement category

    • Maximum current: 10 A

    • For attachment onto Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables

    • Delivery quantity: 1 set of crocodile clips

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Measuring cable extensions (straight plug) - 1 set

    Bestelnr. 0590 0013

    Use the measuring cable extensions (length 1115 mm, straight plug) for looping in the measuring instrument with available banana jacks, for direct connection of your measuring instrument to test sockets, for the use of crocodile clips and also of measuring clamps made by other manufacturers.
    • CAT IV 600 V / CAT III 1000 V measurement category

    • Maximum current: 10 A

    • 1 set of measuring cable extensions with straight plug

    • For attachment onto standard measuring cables

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Standard measuring cables (straight plug) - tip Ø: 4 mm

    Bestelnr. 0590 0012

    Rubber-coated grips mean the standard measuring cables ensure a secure hold when measuring electrical parameters. The standard measuring cables can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter.
    • CAT II 1000 V measurement category

    • Tip Ø: 4 mm; tip length: 18 mm

    • 1 set of measuring cables with straight plug

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Spare 10 A/600 V fuses - 5 items

    Bestelnr. 0590 0005

    These spare fuses for the testo 760-1/-2 digital multimeter with an overload protection of 10 A / 600 V are used to replace faulty fuses.
    • 10 A / 600 V overload protection

    • Delivery quantity: 5 items

    € 20,00
    € 24,20 inclusief btw, Bebat en Recupel
  • Measuring cable extensions (angled plug) - 1 set

    Bestelnr. 0590 0014

    Use the measuring cable extensions (length 1075 mm, angled plug) for looping in the measuring instrument with available banana jacks, for direct connection of your measuring instrument to test sockets, for the use of crocodile clips and also of measuring clamps made by other manufacturers.
    • CAT IV 600 V / CAT III 1000 V measurement category

    • Maximum current: 10 A

    • 1 set of measuring cable extensions with angled plug

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Standaard meetleidingen (haakse stekker) - Ø punt: 2 mm, lengte punt: 3 mm

    Bestelnr. 0590 0000

    Dankzij met rubber beklede grepen zorgen de standaard meetleidingen voor een veilig houvast bij de meting van elektrische parameters. De standaard meetleidingen kunnen aan Testo stroomtangen, Testo digitale multimeters of aan multimeters van andere fabricaten worden aangesloten.
    • Meetcategorie CAT III 1000 V

    • Ø punt: 2 mm; lengte punt: 3 mm

    • 1 set meetleidingen met haakse stekker

    € 19,00
    € 22,99 inclusief btw, Bebat en Recupel
  • Spare 630 mA/600 V fuses - 5 items

    Bestelnr. 0590 0007

    These spare fuses for the testo 760-2 digital multimeter with an overload protection of 630 mA / 600 V are used to replace faulty fuses.
    • 630 mA / 600 V overload protection

    • Delivery quantity: 5 items

    € 15,00
    € 18,15 inclusief btw, Bebat en Recupel
23 Producten gevonden
Meer tonen