testo 324 basic set - Pressure and leakage measuring instrument

Ordem nº  0563 3240 70

  • Included in the set: DVGW-tested testo 324 pressure and leakage measuring instrument, including integrated pressure pump, mains unit, system case with feeding unit, connection block and connection hose, manual test pump, adapter for gas boiler test port and ¾” and 1¼” high-pressure stage stops

  • Automatic pressure build-up to 300 mbar by means of an integrated pressure pump; manual test pump for generating higher pressures, e.g. for the 1 bar test

  • All the important measurements in one instrument: tightness test, load test and serviceability test

  • Step-by-step guide through regulatory-compliant measurement menus: conducting tests on gas pipes has never been easier

Ready to start right away on all necessary and legally prescribed measurements on gas pipes: make sure you get the basic set with the testo 324 pressure and leakage measuring instrument, including a system case, along with manual test pump and other essential accessories.

R$ 18.279,92
Preço sugerido

Descrição

Over the course of time gas pipes can become leaky. The testo 324 basic set enables you to get down to work straight away and carry out all relevant and legally prescribed tests on gas pipes.
 

testo 324 basic set – pressure and leakage measuring instrument in detail


testo 324 pressure and leakage measuring instrument, DVGW tested:
 
  • All the important measurements in one instrument:
  1.  gas pipe test according to TRGI 2018 DVGW G600 (load, tightness and serviceability test)
  2. Testing on LPG pipes according to TRF 2012
  3. Gas pipe test on caravans according to DIN DVGW G607 and DIN EN 1949
  4. Automatic determination of pipe volume in gas pipes
  5. Waste water pipe test
  • Automatic serviceability test: the system case with feeding unit (included in the scope of delivery, for further information see system case) feeds in the gas using the gas bladder. Since the gas bladder is filled with the system's own gas, there is no possibility of a hazardous gas-air mixture developing during the serviceability test
  • Carry out the tests prescribed by TRGI with ease, thanks to stored guidelines and a step-by-step guide through the measurement menu. The relevant tests, e.g. the tightness test on gas pipes, are carried out automatically by the pressure and leakage measuring instrument. This gives you more time for other jobs
  • The single-hose connection makes it extremely easy to operate, while the high-resolution colour graphic display also makes it convenient to work with
  • Measuring location and customer management: the measurement data can be stored and documented quickly and easily in previously created customer folders, assigned to the measuring location
  • Maximum precision is offered by the built-in sensors – a flow sensor, an absolute pressure sensor and two differential pressure sensors are all installed in the testo 324. Optionally, up to two temperature probes or high-pressure probes of up to 25 bar can be connected to the measuring instrument
  • The pressure pump integrated in the testo 324 enables automatic pressure build-up of up to 300 mbar, for example for the tightness test at 150 mbar on gas pipes
  • 2-year warranty

System case:
 
  • The system case is equipped with a feeding unit, connection block and connection hose and has an instrument, pump and hose connection, including overpressure valve and stopcock
  • The system case has special inserts along with compartments for measuring instrument and accessories – this means your equipment is always ready to hand
     
Manual test pump:
 
  •  You have the option of generating higher pressures with the manual test pump, for example for the 1 bar test

 

Escopo da entrega

  • DVGW-tested testo 324 pressure and leakage measuring instrument, including rechargeable battery and calibration protocol (0632 3240)
  • Mains unit for testo 324 (0554 1096), also suitable for infrared printer 0554 0549
  • System case, including feeding unit, connection hose and connection block, dimensions (W x H x D): 476 x 191 x 363 mm (0516 3240)
  • Manual pump for setting the test pressure (0554 3157)
  • Adapter for the gas boiler test port
  • High-pressure stage stops with ¾” and 1 ¼” (0554 0533)
NTC

Faixa de medição

-20 a +100 °C

Tipo K (NiCr-Ni)

Faixa de medição

-40 a +600 °C

Exatidão

±0,5 °C ou ±0,5 %

Pressão absoluta

Faixa de medição

600 a 1150 hPa

Exatidão

±3 hPa

Sobrecarga

to 1200 hPa

Medição de vazamento

Faixa de medição

0 a 10 l/h

Exatidão

±0,2 l/h ou ±5 % do vm

Resolution

10,0

Medição de pressão

Faixa de medição

0 a 1000 hPa

Exatidão

±0,5 hPa a ±3 % do vm

Dados técnicos gerais

Temperatura de operação

+5 a +40 °C

Classe de proteção

IP40 ac. com EN 60529

Soquetes adicionais de amostra

2 Hirschmann sockets for connecting pressure and temperature probes

Conexão de gás

2 pressure connections DN 5

DVGW permissão de acordo com 5925

Instrument class L up to volume = 200 litres

Temperatura de armazenagem

-20 a +50 °C

Peso

7000 g

Cálculo do volume da tubulação

Measuring range

max. 1200

Accuracy

±0,2 ou ±5 (1 a 200 l)

Plugs, tampas, mangueiras etc.

Ordem nº: 0554 0529

R$ 564,40
Preço sugerido

Catálogos de produto

Manual de Instruções

Software