Portugal

Set testo 330-2 LL - set

Encomenda nº  0563 3372 70

  • 330-2 LL flue gas analyzer with fresh air valve to protect the CO measuring cell and to extend the CO measuring range to 30,000 ppm 

  • 4-year warranty on the probes which users can change themselves, including sensor monitoring with a service life of up to 6 years

  • Single-hose connection: just one hand movement is needed to securely connect all the channels for flue gas measurement (gas paths, draught, temperature probe integrated into the flue gas probe)

  • TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3

Kit analisador de gases de combustão testo 330-2 LL com H2 para serviços ao consumidor e técnicos de manutenção, incl. analisador de gases de combustão, bateria recarregável e protocolo de calibração; alimentador 100-240 V para conexão à rede ou carregamento da bateria; sonda de gases de combustão comprimentos 300 mm, Ø 8 mm; kit de mangueiras de conexão para medição de pressão de gás separado; impressora Testo por IrDA; Mala de sistema básica;

Descrição do produto

The testo 330-2 LL professional long-life set for customer service and service engineers means you have the professional equipment you need for all measuring tasks to do with heating systems. The comprehensive selection of gas probes enables a really wide range of flue gas measurements – there is therefore generally no need for any other measuring instrument. You can define other fuels yourself as required. The successful combination of outstanding sensor technology, longevity and reliability make the testo 330-2 LL flue gas analyzer a real mainstay. The sensor service life of up to 6 years means that you can dispense with at least one sensor replacement during the typical period of use.

Flexible to use for flue gas analysis – the applications

The flue gas analysis set already contains all the accessories required for the most important measuring tasks to do with heating. You can extend it for additional measurements, thanks to a large range of probes and sensors, if needs be. Suitable for the following applications:
  • Flue gas measurement (combustion air temperature, flue gas temperature, O2, CO and CO2 concentration and as an option: NO / NO2, flue gas loss, gas-air ratio and efficiency)
  • Draught measurement in parallel to flue gas measurement
  • Gas flow and static gas pressure (with optional pressure connection set)
  • 4 Pa measurement (with optional fine pressure probe)
  • Gas leak detection (with optional probes)
  • Ambient CO / CO2 measurement (with optional probe)
  • Differential temperature measurement to determine the spread between flow and return (with optional probe)
  • CO measurement with 15-minute mean value calculation
  • Data recording for up to 2 hours possible
  • Performance of gas tightness tests (150 mbar, with optional pressure connection set)
  • Automatic burner error diagnosis through optional readout adapter (for digital automatic furnaces)
 

Versatile, robust and efficient – the advantages of the flue gas analyzer

The flue gas analyzer has three high-quality sensor sockets – for the permanently integrated O2 sensor, the configurable CO sensor and an optional NO sensor. This means it meets the statutory provisions of the German Federal Immission Control Ordinance (BImSchV). Without H2 compensation, the CO sensor offers a measuring range of up to 4,000 ppm, with H2 compensation the measuring range increases to 30,000 ppm.
The reliable instrument diagnosis includes the instrument leaktightness test, along with continuous checking of the capacity of the measuring cells.

A temperature probe is integrated into the flue gas probe for direct measurement of temperature, O2, CO and NO. This enables calculation of all the relevant flue gas parameters, such as CO2 value, efficiency, flue gas loss and NO2 (with optional 3rd sensor). In addition, direct draught or pressure measurements are also possible.

There is automatic fresh air dilution as from 8,000 ppm for CO measurement. This means that the CO measuring cell is also protected, which is positive in terms of the long service life of up to 6 years, and the measuring range is increased to 30,000 ppm.

Zeroing without probe removal enables the probe to remain in the flue during zeroing. This saves time and laborious flushing.

The high-resolution graphic colour display presents readings graphically and can also easily be read in poor light conditions. Self-explanatory menu guidance and standardized measuring processes make the flue gas analyzer really easy to operate with just a few clicks.

You get a 4-year warranty on the flue gas analyzer, probe and O2/CO sensor.

Further impressive advantages of the professional long-life set for flue gas measurements

  • Long service life thanks to the long-life Li-ion rechargeable battery which you can replace yourself
  • Integrated magnets for fast fixing of the flue gas analyzer onto the burner/boiler
  • Integrated condensate trap that is very easy to empty
  • Single-hose connection: just one hand movement is needed to securely connect all channels for flue gas measurement via the probe coupling (gas paths, draught, temperature probe integrated in the flue gas probe)
  • Memory for 500,000 readings with chronological storage of the measurement results for each customer
  • Bluetooth interface
  • Printer for data printout directly at the measuring location (connected to the flue gas analyzer via Bluetooth)
  • Free App for Android smartphones and tablets (use via Bluetooth): where there is a large distance from the measuring point, the measurement data can be transferred from the flue gas analyzer to a smartphone or tablet. Logging and dispatch to customers possible with the App
  • EasyHeat PC software (optional): create customer profiles on the PC saving lots of time, print out measurement protocols as professional reports with just a few clicks

 

O pedido inclui

- testo 330-2LL flue gas analyzer, including long-life gas sensors with integrated draught and gas zeroing, O2/CO cell (CO cell with H2 compensation), Bluetooth, graphic display, rechargeable battery and calibration protocol
- Mains unit for mains operation or charging the rechargeable battery in the flue gas analyzer
- Modular flue gas probe (length 300 mm, Ø 8 mm)
- Combustion air temperature probe (length 190 mm)
- Hose connection set for separate gas pressure measurement
- Bluetooth printer
- Instrument case (height: 130 mm) for flue gas analyzer, probes and accessories
Pressão diferencial

Faixa de medição

±10000 Pa

Exatidão

±0,3 Pa (0 a 9,99 Pa) mais ±1 digito

±3 % do vm (10 a 10000 Pa) mais ±1 digito
Medição de O2

Faixa de medição

0 a 21 vol.%

Exatidão

±0,2 vol.%

Resolução

0,1 vol.%

Tempo de reação t₉₀

< 20 s
CO (compensado H2)

Faixa de medição

0 a 8000 ppm

Exatidão

±10 ppm ou ±10 % do vm (0 a 200 ppm)

±20 ppm ou ±5 % do vm (201 a 2000 ppm)

±10 % do vm (2001 a 8000 ppm)

Resolução

1 ppm

Tempo de reação t₉₀

< 60 s
CO baixo (compensado H2)

Faixa de medição

0 a 500 ppm

Exatidão

±2 ppm (0 a 39,9 ppm)

±5 % do vm (40 a 500 ppm)

Resolução

0,1 ppm

Tempo de reação t₉₀

< 40 s
Determinação CO compensado H2

Faixa de medição

0 a 30000 ppm

Exatidão

±100 ppm (0 a 1000 ppm)

±10 % do vm (1001 a 30000 ppm)

Resolução

1 ppm
Medição de NO

Faixa de medição

0 a 3000 ppm

Exatidão

±5 ppm (0 a 100 ppm)

±5 % do vm (101 a 2000 ppm)

±10 % do vm (2001 a 3000 ppm)

Resolução

1 ppm

Tempo de reação t₉₀

< 30 s
Medição de NO baixo

Faixa de medição

0 a 300 ppm

Exatidão

±2 ppm (0 a 39,9 ppm)

±5 % do vm (40 a 300 ppm)

Resolução

0,1 ppm

Tempo de reação t₉₀

< 30 s
Medição de tiragem

Faixa de medição

-9,99 a +40 hPa

Exatidão

±0,02 hPa ou ±5 % do vm (-0,50 a +0,60 hPa)

±0,03 hPa (+0,61 a +3,00 hPa)

±1,5 % do vm (+3,01 a +40,00 hPa)

Resolução

0,01 hPa
Medição temperatura

Faixa de medição

-40 a +1200 °C

Exatidão

±0,5 °C (0 a +100,0 °C)

±0,5 % do vm (Faixa remanescente)

Resolução

0,1 °C (-40 a +999,9 °C)

1 °C (> +1000 °C)
Determinação do grau de efetividade (Eta)

Measuring range

0 a 120 %

Resolução

0,1 %
Perda de gas de combustão

Faixa de medição

0 a 99,9 %

Resolução

0,1 %
Medição de CO2 (cálculo de O2)

Faixa de medição

0 a CO₂ max (Gama visualizada)

Exatidão

±0,2 vol.%

Resolução

0,1 vol.%

Tempo de reação t₉₀

< 40 s
Velocidade de fluxo

Faixa de medição

0,15 a 3 m/s

Resolução

0,1 m/s
Medição de pressão

Faixa de medição

0 a +300 hPa

Exatidão

±0,5 hPa (0,0 a 50,0 hPa)

±1 % do vm (50,1 a 100,0 hPa)

±1,5 % do vm (Faixa remanescente)

Resolução

0,1 hPa
Medição de CO (sem compensação de H?)

Faixa de medição

0 a 4000 ppm

Exatidão

±20 ppm (0 a 400 ppm)

±5 % do vm (401 a 2000 ppm)

±10 % do vm (2001 a 4000 ppm)

Resolução

1 ppm

Tempo de reação t₉₀

< 60 s
Medição de CO ambiente

Faixa de medição

0 a 500 ppm

Exatidão

±5 ppm (0 a 100 ppm)

±5 % do vm (> 100 ppm)

Resolução

1 ppm

Tempo de reação t₉₀

Aprox. 35 s

com sonda CO

Medição ambiente de CO?

Faixa de medição

0 a 1 vol.%

0 a 10000 ppm

Exatidão

±50 ppm ou ±2 % do vm (0 a 5000 ppm)

±100 ppm ou ±3 % do vm (5001 a 10000 ppm)

Tempo de reação t₉₀

Aprox. 35 s

Sonda de CO2 ambiente

Vazamento de gás para gases inflamáveis

Faixa de medição

0 a 10000 ppm CH₄ / C₃H₈; Gama visualizada

Exatidão

Sinal Apresentação ótica (LED) Alarme sonoro através de um zumbido

Tempo de reação t₉₀

< 2 s

com sonda de deteção de fugas de gás

Temperatura via sonda fina para pressão

Faixa de medição

-40 a +1200 °C max. (dependent on probe)

Exatidão

±0,5 °C (-40 a 100 °C)

±0,5 % do vm (Faixa remanescente) plus probe accuracy

Resolução

0,1 °C
Dados técnicos gerais

Dimensões

270 x 90 x 65 mm

Temperatura de operação

-5 a +45 °C

Tamanho do display

240 x 320 pixels

Função de exibição

Visor gráfico multicolor

Fonte de energia

Bateria recarregável 3.7 V / 2.6 Ah Unidade principal 6 V / 1.2 A

Máximo

500.000 leituras

Temperatura de armazenagem

-20 a +50 °C

Peso

600 g (sem bateria)

Software