logo
  1. Home
  2. testo 606-1

testo 606-1 -  Instrument de buzunar pentru măsurarea umidităţii

0560 6060
520,00 RON 618,80 RON
1
  • Măsurarea precisă a umidităţii lemnului datorită vârfurilor de penetrare
  • Diverse curbe caracteristice pentru detectarea umezelii din materialele de construcţie
  • Funcţie hold pentru citirea convenabilă a valorilor măsurat
  • Lumină de fundal
  • testo 606-1, umidometru pentru lemn şi materiale, include capac de protecţie, baterii şi protocol de calibrare.
    testo 606-1 este un instrument portabil pentru măsurarea umidităţii materialelor extrem de convenabil şi uşor de utilizat.
    Umiditatea materialului este afişată în procente de masă în funcţie de curbele caracteristice pentru lemn şi materiale de construcţii.

    • Umidometru pentru lemn şi materiale testo 660-1
    • Capac de protecție
    • Husă de protecție și transport

    Umiditatea materialului

    Domeniu de măsură
    7,0 la 47,9 % by weight; oak, pine, maple, ash-tree, douglas fir, meranti
    0,1 la 16,5 % by weight; bricks
    8,8 la 54,8 % by weight; beech, spruce, larch, birch, cherry, walnut
    0,7 la 8,6 % by weight; cement mortar
    0,9 la 22,1 % by weight; cement screed, concrete
    0,0 la 11,0 % by weight; anhydrite screed
    0,6 la 9,9 % by weight; lime mortar, plaster
    Material
    ±1 %
    1 s
    0,1

    Date tehnice generale

    Dimensiuni
    119 x 46 x 25 mm (incl. protective cap)
    Temperatura de operare
    -10 la +50 °C
    Clasă de protecție
    IP20
    Tip baterie
    2 x baterii AAA
    Durata de viață baterie
    200 h (average, without display illumination)
    Temperatura de depozitare
    -40 la +70 °C
    Greutate
    90 g (protective cap and batteries included)

    Certificate

  • Certificate
    Calibration certificate
    Certificat de calibrare ISO pentru umiditate
      :
      0520 0076
      730,00 RON 868,70 RON

    • Determining moisture in wood

      Moisture content is a decisive factor in the further processing and use of stored timber products. If wood is installed with the wrong moisture content this may result in mechanical deformations (contracting and swelling) at the site where the material is subsequently used, and therefore damage to pieces of furniture or entire supporting structures in buildings. Therefore, before being made into furniture or supporting material by a craftsman, the suitability of the wood has to be assessed by measuring the moisture content.
      Checking the moisture content of fuels, e.g. firewood, is part of the daily duties performed by flue gas inspectors/chimney sweeps. A high moisture content in the fuel means energy loss and a waste of resources.
      All Testo wood and building moisture measuring instruments measure the moisture in percentage weight compared to the dry mass (dry weight) of the material.
      The measuring methods also include the option of measuring resistance by means of the electrical conductivity of the material or the magnetic flux leakage method, which measures using the electrical field in the material.
      The testo 606-1 is a particularly practical and easy to use material moisture measuring instrument in pocket size. The material moisture is displayed directly in percentage weight by means of stored material characteristic curves for wood. Characteristic curves are available for measuring wood moisture in beech, fir, larch, oak, pine and maple wood. There are a further five characteristics stored in the instrument.
      The measuring instrument uses two electrodes rammed into the material for its reading. In addition to material moisture, the testo 606-2 also measures humidity and air temperature. In this way, drying conditions, for example, can be assessed on site quickly and reliably.
      testo 606-1