testo 625 - Instrument pentru măsurarea temperaturii şi a umidităţii

Cod produs  0563 6251

  • Afişarea temperaturii şi umidităţii relative / temperatura bulbului umed / punctul de rouă

  • Transferul datelor este posibil şi wireless (opţional)

  • Senzor de umiditate stabil pe termen lung

  • Afişarea valorilor min./max.

testo 625, instrument de măsură pentru umiditate/temperatură, include cap sondă umiditate, baterie şi protocol de calibrare

Descriere produs

testo 625 este un instrument compact cu sondă integrată pentru măsurarea umidităţii şi temperaturii aerului.

Pentru măsurători în zone greu de accesat, se poate detaşa cu uşurinţă sonda de umiditate din aparat şi să o conectaţi la un mâner cu cablu fix (opţional). Ca alternativă, valorile măsurate pot fi transferate wireless pe distanţe mari de la sondă la instrumentul de măsură utilizând un mâner radio.

 

Conținut pachet

testo 625, cap sondă umiditate, baterie şi protocol de calibrare.
NTC

Domeniu de măsură

-10 … +60 °C

Acuratețe

±0,5 °C

Rezoluție

0,1 °C

Tip K (NiCr-Ni)

Domeniu de măsură

-200 … +1370 °C

Acuratețe

Vedeți date sondă

Rezoluție

0,1 °C

Radio probe

Senzor capcacitiv de umiditate

Domeniu de măsură

0 … 100 %rF

Acuratețe

±2,5 %rF (5 … 95 %rF)

Rezoluție

0,1 %rF

Date tehnice generale

Dimensiuni

182 x 64 x 40 mm

Temperatura de operare

-20 … +50 °C

Carcasă

ABS

Tip baterie

baterie 9V, 6F22

Durata de viață baterie

70 de ore (fãrã operare radio)

Temperatura de depozitare

-40 … +70 °C

Greutate

195 g

Localising the risk of mould

The portable measuring instrument testo 625 is suitable for measuring indoor humidity and temperature. By calculating the dew point temperature, places at risk of condensation can be localised.

It provides initial information about whether mould is being caused by condensation, or if there is a risk of this occurring.

All of our temperature/humidity measuring instruments and probes include the humidity sensor developed and patented by Testo; it is both stable long-term and condensation-resistant.

Monitoring production and storage conditions

Our temperature/humidity measuring instruments are used around the world in production, storage and server rooms, museums, archives, cold storage warehouses, containers and sales counters.

Manufacturers, carriers, or dealers of sensitive products must ensure that specified temperature or humidity values are observed during production and storage. The testo 635 offers the option of performing spot measurements in relevant places.

The testo 625 is a compact instrument with integrated humidity probe. It displays relative humidity, wet bulb temperature or dew point, and temperature. For measurements in difficult to reach places, the humidity probe can simply be removed and attached to the handle with a probe cable (accessories). Alternatively, the readings can be transmitted wirelessly by radio over great distances from the probe to the measuring instrument.

Thermal comfort

Assessing thermal comfort, based on the parameters of air temperature and relative humidity, is important for the well-being of the person using a room. Pleasant room conditions are a primary factor in the planning, selection and configuration of a heating and ventilation system.

Humidity can be specified as a relative or absolute value. Recommendations for the relative humidity in a room range between a minimum of 30% and maximum value of 65%. The humidity limit outside this range is either not reached or exceeded.

All of our temperature/humidity measuring instruments and probes include the humidity sensor developed and patented by Testo; it is both stable long-term and condensation-resistant.

The testo 625 is a compact instrument with integrated humidity probe. It displays relative humidity, wet bulb temperature or dew point, and temperature. For measurements in difficult to reach places, the humidity probe can simply be removed and attached to the handle with a probe cable (accessories). Alternatively, the readings can be transmitted wirelessly by radio over great distances from the probe to the measuring instrument.