Analizator dimnih plinov

The Testo flue gas analyzers with exchangeable, precalibrated flue gas sensors measure, analyse and document whether flue gas values are adhered. Irrespective of whether you carry out spot or long-term measurements, we offer a comprehensive range of gas sensors for the analysis of flue gases.

81 Products or Recomendations for Analizator dimnih plinov
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

  • testo 310 set with printer

    Order-Nr. 0563 3110

    testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.

    • Robust and light instrument for daily use

    • 30 seconds sensor zeroing

    • Integrated condensate trap

    • Integrated magnets for easy fixing to burner

    € 630,00
    € 768,60 z DDV-om
  • testo 310 - Entry-level flue gas analyzer

    Order-Nr. 0563 3100

    Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 flue gas analyzer. Designed especially for use in the field.

    • Direct O2, CO, flue gas and ambient temperature measurements

    • Integrated measurement menu for flue gas, draft, CO ambient air and pressure

    • Quick sensor zero in only 30 seconds

    • Large, backlit digital display, rechargeable lithium battery with up to 10 hours life

    € 500,00
    € 610,00 z DDV-om
  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.

    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.

    • User-friendly application-specific menu guide

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

  • testo 380 - Particle counter

    Order-Nr. 0632 3800

    As a chimney sweep, heating engineer or service technician you are required by law to abide to the rules and regulations (like the 1. BlmSchV – Ord. 1 of the Federal Immission Control Ordinance) which apply to your field and profession. You can rely on the testo 380 to help you to carry out your daily tasks because it is certified for use with solid, liquid and gaseous fuels as well as for the threshold values 1 and 2 according to 1. BlmSchV. The easy-to-use particle counter can take you through the preprogrammed measuring programm of the BlmSchV and save you heaps of time and hassle.

    • Carry out parallel fine particle, O2 and CO measurements in real time

    • Ideal for chimney sweeps and system technicians; easy-to-follow, step-by-step guide for carrying out measurements according to 1. BlmSchV

    • Large, graphic colour display, easy to use, low running and maintenance costs

    • Certified for use with solid, liquid and gaseous fuels as well as for the threshold values 1 and 2 according to 1. BlmSchV

  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

  • Modular flue gas probe, 300 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9761

    TÜV-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    € 226,00
    € 275,72 z DDV-om
  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    • NO2/SO2 special hose (length: 2.2 m)

  • Combustion air temperature probe (190 mm immersion depth)

    Order-Nr. 0600 9787

    The probe is used for the specific measurement of combustion air temperature within the context of flue gas or particulate matter measurements.

    • Flexible positioning (immersion depth 190 mm, cable length 2.2 m) 

    • Cone for attachment included

    • Measuring range: 0 to +100 °C

    € 95,00
    € 115,90 z DDV-om
  • Dual wall clearance probe for O2 supply air measurement

    Order-Nr. 0632 1260

    The dual wall clearance probe (in combination with the appropriate measuring instrument) enables easy and reliable measurement of O2 supply air in the dual wall clearance. In addition, it can also be used to check the dual wall clearance for leaks and blockages.

    • Detection of leaks and blockages in the dual wall clearance

    • Curved probe for easy insertion into the dual wall clearance

    € 128,00
    € 156,16 z DDV-om
  • Industrial probe set 1 200 °C

    Order-Nr. 0600 7610

    The industrial probe set 1 200 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 200 °C) or for applications involving large flue gas pipe diameters.

    • Very easy to handle

    • Can be used in combination with testo 340 and testo 350

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Additional inline filter to protect the gas sampling hose from contamination

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • NO2/SO2 special hose (length: 2.2 m)

  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • NO2/SO2 special hose (length: 2.2 m)

  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    • NO2/SO2 special hose (length: 2.2 m)

  • Mini ambient air probe for flue gas analyzers

    Order-Nr. 0600 3692

    Use the mini ambient air probe for direct measurement of ambient air temperature on the flue gas analyzer.

    • Can be plugged directly into the flue gas analyzer 

    • Shock-resistant thanks to plastic basket

    • Measuring range: 0 to +80 °C

    € 49,00
    € 59,78 z DDV-om
  • Modular flue gas probe (700 mm, Tmax 1000 °C) with preliminary filter

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Preliminary filter offers protection from dusty flue gases

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C, TÜV-tested

    Order-Nr. 0600 9760

    TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    € 221,00
    € 269,62 z DDV-om
  • Compact basic flue gas probe, 300 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9741

    Compact flue gas probe with 300 mm long probe shaft including particle filter and thermocouple. Bayonet lock ensures quick, easy connection to the measuring instrument.

    • Flue gas path, draught path and temperature probe can be connected via a single probe coupling

    • Easy-to-replace dirt filter

    • Temperatures of up to 500 °C can be measured thanks to the thermocouple probe

    • Includes practical cone for attachment

    € 154,00
    € 187,88 z DDV-om
  • Compact basic flue gas probe, 180 mm, Ø 6 mm, Tmax 500 °C

    Order-Nr. 0600 9740

    Compact basic flue gas probe with 180 mm long probe shaft, integrated thermocouple and dirt filter.

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated dirt filter protects instrument and sensors

    • Integrated thermocouple probe for temperature measurements up to 500 °C

    • Includes practical cone for attachment

    € 143,00
    € 174,46 z DDV-om
81 Products found
Prikaži več