Vane

28 Products found
  • testo 410-1 - Vane anemometer

    Order-Nr. 0560 4101

    The testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.

    • Vane anemometer with permanently installed 40 mm vane

    • Measurement of air velocity and air temperature

    • Calculates wind chill and the Beaufort wind force

    • Practical: with single-point averaging, max/min and Hold function

    € 90,00
    € 109,80 z DDV-om
  • testo 416 - Vane anemometer

    Order-Nr. 0560 4160

    Vane anemometer with telescopic sensor – ideal for carrying out airflow measurements in air ducts.

    • Permanently connected telescopic sensor – maximum length 890 mm, diameter 16 mm

    • Airflow measurements, selective and time mean values for calculating air volume

    • Hold function; min/max display; auto power off

    • Calibration certificate and batteries included

    € 436,00
    € 531,92 z DDV-om
  • testo 417 - Air flow meter

    Order-Nr. 0560 4170

    The testo 417 vane anemometer allows you to carry out quick and precise measurements at air inlets and outlets. The easy-to-read display shows air flow speed and direction as well as volumetric flow rate and temperature. The meter can also calculate the mean time value, average value and minimum and maximum value at the touch of a key.

    • Compact anemometer with integrated 100 mm vane

    • For measuring air flow, volumetric flow rate and temperature

    • Ideal for carrying out measurements at air inlets and outlets

    • For carrying out measurements at disk valves, ventilation grilles and ceiling diffusers using optionally available accessories

    € 316,00
    € 385,52 z DDV-om
  • testo 410-2 - Vane anemometer

    Order-Nr. 0560 4102

    Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.

    • Permanently installed vane with a diameter of 40 mm

    • Measurement of air velocity, air temperature and humidity

    • Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force

    • Includes single-point averaging, max/min and Hold function

    € 140,00
    € 170,80 z DDV-om
  • testo 435-1 - Multi-function climate measuring instrument

    Order-Nr. 0560 4351

    testo 435 is a series of multi-function climate measuring instruments made by Testo. The testo 435-1 version is the entry-level measuring instrument in this series. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess air quality. For this we offer you a comprehensive range of optional probes and sensors to choose from.

    • You have the option of connecting thermal anemometers and vane anemometers for measuring air velocity and volumetric flow in ventilation ducts

    • Air quality: measurement of CO2, air humidity, air temperature and absolute pressure with the optional IAQ probe

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    € 409,00
    € 498,98 z DDV-om
  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.

    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    € 659,00
    € 803,98 z DDV-om
  • testo 417 Set 2 - vane anemometer set

    Order-Nr. 0563 4172

    Get the testo 417 vane anemometer with integrated 100 mm vane now, in a set that includes two measurement funnels, a volume flow straightener and other accessories. This ideally equips you to carry out volume flow measurement at plate outlets, ventilation grilles and swirl outlets.

    • testo 417 vane anemometer for measuring air flow velocity, volume flow and temperature

    • Attachable measurement funnels make this ideal for measuring volume flow at ventilation outlets

    • Also suitable for swirl outlets: thanks to the flow straightener, precise measurements can also be taken at swirl outlets

    • Important accessories included in the set: measurement funnels, flow straightener and a bag for storage

    € 465,00
    € 567,30 z DDV-om
  • testo 435-2 set - Climate measuring instrument set

    Order-Nr. 0563 4357

    You can use the testo 435-2 multifunction measuring instrument to carry out all the measurements you need to adjust ventilation and air conditioning systems and assess indoor air quality. You have many optional sensors and probes to choose from which you can attach to the climate measuring instrument. This set already provides you with several probes and with accessories.

    • testo 435-2 multifunction measuring instrument for the adjustment and testing of air conditioning and ventilation systems

    • Several attachable probes included in the set (vane probes, temperature/humidity probes)

    • Additional optional probes available for a really wide range of measuring purposes

    • Large instrument memory for up to 10,000 readings

  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!

    • Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10 000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

    € 519,00
    € 633,18 z DDV-om
  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.

    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.

    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

    € 700,00
    € 854,00 z DDV-om
  • testo 410 i - vane anemometer with smartphone operation

    Order-Nr. 0560 1410

    Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Probes App enables readings to be viewed conveniently and offers intelligent additional functions.

    • Measurement of air velocity, volume flow and temperature

    • Display of the volume flow of multiple outlets in order to adjust systems

    • Easy parametrization of the outlet (dimension and geometry)

    • Convenient viewing of readings on a smartphone/tablet with the testo Smart Probes App

    € 75,00
    € 91,50 z DDV-om
  • testo Smart Probes VAC set - with smartphone operation

    Order-Nr. 0563 0003

    With the Testo Smart Probes VAC set, you can check air velocities, humidity, volume flows and temperatures in, on and around air conditioning systems. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

    • Easy parametrization of the outlet/duct cross-section for measuring the volume flow

    • List of multiple volume flows and calculation of the total volume flow (in the log)

    • Identification of mould risk thanks to the combined utilization of testo 605i and testo 805i

    • Rapid image documentation with IR temperature readings and measuring spot marking

    € 315,00
    € 384,30 z DDV-om
  • testo 417 set 1 - Vane anemometer set

    Order-Nr. 0563 4171

    Make sure you get the testo 417 vane anemometer with an integrated 100 mm vane, in a set that includes two measurement funnels and other accessories. This will mean you are ideally equipped for volumetric flow measurement at ventilation grilles and poppet valves.

    • testo 417 vane anemometer for measuring flow velocity, volumetric flow and temperature

    • Attachable measurement funnels make it ideal for volumetric flow measurement at ventilation outlets

    • Simple testing of incoming / outgoing air in controlled ventilation of living spaces

    • Important accessories included in the set: measurement funnels for poppet valves and ventilation grilles, along with a bag for storage

    € 387,00
    € 472,14 z DDV-om
  • Vane probe (Ø 25 mm) - can be used at high temperatures

    Order-Nr. 0635 6045

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow in ventilation ducts. It can also be used at high temperatures of up to +350 °C.

    • Probe diameter: 25 mm

    • Can be used at high temperatures of up to +350 °C

    • Can be plugged onto the handle (included in the delivery)

    • Measuring range: 0.6 to +20 m/s

    € 2.799,00
    € 3.414,78 z DDV-om
  • Vane probe (Ø 60 mm) - for flow measurements at air outlets

    Order-Nr. 0635 9335

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets or duct outlets.

    • Vane diameter: 60 mm

    • With telescope (can be extended to 910 mm)

    • Measuring range: +0.25 to +20 m/s

    € 399,00
    € 486,78 z DDV-om
  • Vane probe (Ø 100 mm) - for flow measurements at air outlets

    Order-Nr. 0635 9340

    The vane probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets.

    • Vane diameter: 100 mm – ideal for carrying out measurements at ventilation outlets

    • Easy to operate at ceiling outlets, since the probe can be bent at a 90° angle

    • Measuring range: +0.1 to +15 m/s

    € 529,00
    € 645,38 z DDV-om
  • Vane/temperature probe (Ø 100 mm) - for air outlets

    Order-Nr. 0635 9343

    The vane/temperature probe (in conjunction with the appropriate measuring instrument) is ideal for determining flow velocity and volume flow at ventilation outlets. For measurements at plate outlets and ventilation grilles, it is particularly recommended to use the vane/temperature probe in conjunction with the testo 480 measuring instrument and the testovent 417 funnel set (both available to order).

    • Vane diameter: 100 mm 

    • Integrated temperature measurement up to +60 °C

    • Intelligent calibration concept

    • Flow measuring range: +0.1 to +15 m/s

    € 509,00
    € 620,98 z DDV-om
28 Products found
Prikaži več