Emission

29 Products or Recomendations for Emission
  • testo 549 - Digital manifold

    Order-Nr. 0560 0550

    The testo 549 digital manifold offers many advantages in comparison with analog manifolds: the instrument will make it easier for you to work on refrigeration systems and heat pumps. With its integrated temperature measurement and automatic calculation of superheating/subcooling, you can now do away with additional measurements and manual comparisons (when using an optional clamp probe). You can also use the manifold for 60 current refrigerants.

    • 60 current refrigerants stored in the instrument

    • Calculation of superheating and subcooling in real time (with optional clamp probe): saves you from having to carry

    • Temperature-compensated leakage test

    • Two temperature-compensated pressure sensors

    € 220,00
    € 268,40 z DDV-om
  • testo 890-2 - Thermal Imaging Camera

    Order-Nr. 0563 0890 V2

    With the thermal imager testo 890-2, you are ideally equipped for both professional industrial thermography as well as for building thermography: for inspection of power plants, high temperature measurement, circuit board analysis, control of solar panel systems, complete building thermography, energy consulting among others.

    • testo 890-2 professional thermal imaging camera: resolution 640 x 480 pixels, with optional SuperResolution technology enhanced to 1280 x 960 pixels, thermal sensitivity < 40 mK

    • Wide field of view: 42° wide angle lens

    • Sequence memory in camera optional, humidity calculation, SiteRecognition, panorama image assistant, JPEG memory function, and many, many more practical features

    • Built-in digital camera, optional interchangeable lens, many more features, delivery includes rugeed case, memory card, professional software,…

  • testo 885 - Thermal imager: ideal for industrial and building thermography

    Order-Nr. 0563 0885 V2

    Voltage installation inspections, high temperature measurements and circuit board analysis on the one hand. Solar panel system inspections, complete building envelope thermography and construction thermography for energy saving advice on the other. The testo 885 thermal imaging camera is excellently equipped for both professional industrial and building thermography.

    • testo 885 professional thermal imaging camera: resolution 320 x 240 pixels, optional SuperResolution enhanced to 640 x 480 pixels, thermal sensitivity < 30 mK

    • Optional high temperature measurements up to 1 200 °C

    • Panorama image function, SiteRecognition technology, humidity calculation, JPEG storage, optional: sequence storage in the unit and much, much more

    • Built-in digital camera, optional interchangeable lens, many added features, wide range of accessories included in delivery (carry case, SD card, pro software etc.)

  • testo 885-2 Kit - Thermography kit

    Order-Nr. 0563 0885 V3

    The testo 885 thermography kit with matching telephoto and wide range of accessories for professional industrial and building thermography and energy advice.

    • testo 885 professional thermal imager: resolution 320 x 240 pixels, optional SuperResolution enhanced to 640 x 480 pixels, thermal sensitivity < 30 mK

    • 11° x 9° telephoto for precise measuring of far-off objects

    • Panorama image function, SiteRecognition technology, humidity calculation, JPEG storage, optional: sequence storage in camera and much more

    • All your accessories at your fingertips: rugged carry case, lens pouch, additional battery, quick charger, SD card etc.

  • testo 890-2 Set - Thermal Imaging Camera Pro Set

    Order-Nr. 0563 0890 V3

    The full package: testo 890-2 thermal imaging camera pro set for A to Z professional thermography. High-quality thermal imager, standard and telephoto, wide range of accessories.

    • testo 890-2 professional thermal imaging camera: resolution 640 x 480 pixels, with optional SuperResolution technology enhanced to 1280 x 960 pixels, thermal sensitivity < 40 mK

    • Wide field of view: 42° wide angle lens; 15° x 11° telephoto for precise measuring of distant objects

    • Sequence memory in camera optional, humidity calculation, SiteRecognition, panorama image assistant, JPEG memory function, and many, many more practical features

    • All the accessories at your fingertips: rugged case and lens bag, additional rechargeable battery, quick charger, SD card, lens protection cap etc.

  • testo 350 MARITIME - Exhaust gas analyzer for diesel ship engines

    Order-Nr. 0563 3503

    Testo proudly presents the world’s first portable exhaust gas analyzer for diesel ship engines: the testo 350 MARITIME! The groundbreaking exhaust gas analyzer measures emissions at diesel ship engines in compliance with MARPOL Annex VI and NOx Technical Code 2008.

    • Measures O2, CO, NOx (NO + NO2 separate), SO2 – high precision and long-term stable

    • Certified gas sensors: equal to reference measurement

    • Ready to measure after only two minutes

    • Determination of the fuel sulphur content by means of SO2/CO2 ratio according to MEPC 184 (59)

  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission checks in industry: Professional technology meets practical design. The testo 340 combustion analyzer is an easy-to-use flue gas analyzer that can be fitted with up to four different gas sensors.

    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 338 - Smoke tester

    Order-Nr. 0632 3382

    For diesel engines, the smoke count is an important parameter, not only for evaluating emissions, but also for the correct adjustment of the fuel injection. With the smoke tester testo 338, the determination of degree of blackening is revolutionarily easy; no stationary measurement equipment, no analysis electronics – with just one portable one-hand measuring instrument.

    • Handy and robust: easily possible to carry to the desired application site

    • Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number

    • Easy one-handed operation

    • Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

    € 3.700,00
    € 4.514,00 z DDV-om
  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Control Unit complements the testo 350 Analysis Box (separate product) and makes it easier to control emission measurements.

    • User-friendly application-specific menu guide

    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Automatic processing of measuring programmes over a longer period

  • testo 885-2 - building diagnosis set

    Order-Nr. 0563 0885 V2 E1

    Voltage installation inspections, high temperature measurements and circuit board analysis on the one hand. Solar panel system inspections, complete building envelope thermography and construction thermography for energy saving advice on the other. The testo 885 thermal imaging camera is excellently equipped for both professional industrial and building thermography.

    • testo 885 professional thermal imaging camera: resolution 320 x 240 pixels, optional SuperResolution enhanced to 640 x 480 pixels, thermal sensitivity < 30 mK

    • Wireless humidity probe inclusive

    • Panorama image function, SiteRecognition technology, humidity calculation, JPEG storage, optional: sequence storage in the unit and much, much more

    • Built-in digital camera, optional interchangeable lens, many added features, wide range of accessories included in delivery (carry case, SD card, pro software etc.)

  • Industrial probe set 1 800 °C

    Order-Nr. 0600 7620

    The industrial probe set 1 800 °C enables the extractive sampling of flue gas analyzed at high flue gas temperatures (up to 1 800 °C).

    • Very easy to handle

    • Measurements in applications involving high flue gas temperatures of up to 1 800 °C

    • Additional inline filter protects the gas sampling hose from contamination

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).

    • Easy probe shaft replacement via quick-change click system

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

    • NO2/SO2 special hose (length: 2.2 m)

  • Thermocouple for engine probe

    Order-Nr. 0600 8898

    You can use the thermocouple to measure the flue gas temperature in parallel with flue gas measurement on industrial engines

    • Temperature measurement in parallel with the flue gas measurement on industrial engines

    • Thermocouple with fast response time

    • Can be installed on-site by the user

    • Heat protection handle for comfortable handling even at high temperatures

  • Transport case

    Order-Nr. 0516 3510

    Transport case for secure and tidy storage of testo 350 flue gas analyzer, flue gas probe and accessories, dimensions 570 x 470 x 210 mm (LxWxH)

  • Flue gas probe for industrial engines

    Order-Nr. 0600 7555

    The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C

    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct

    • Additional particle filter in the hose provides protection from contamination

    • Temperature measurement possible with optional thermocouple

    • Probe shaft is easy to replace

29 Products found
Prikaži več