Cement

25 Products or Recomendations for Cement
  • testo 350 - Analysis Box for exhaust gas analysis systems

    Order-Nr. 0632 3510

    The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.
    • Increased measurement range for unlimited measurements even when gas concentrations are higher

    • Easy-to-change gas sensors and easy access to wearing parts

    • Sealed housing with built-in impact protection for use in harsh conditions

    • Easy operation of the analyzer unit via Control Unit or easyEmission software (both products available separately) 

  • testo 340 - Flue gas analyzer for use in industry

    Order-Nr. 0632 3340

    Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.
    • Can measure CO, COlow, NO, NOlow, NO2 or SO2

    • Extended measuring range for use in environments with high gas concentrations

    • Precalibrated gas sensors for quick and easy sensor change

    • Integrated pressure difference and air flow measurements for mass flow calculations

  • testo 350 - Control Unit for exhaust gas analysis systems

    Order-Nr. 0632 3511

    The testo 350 flue gas analyzer fulfils the highest requirements in industrial emission measurement: easy handling, accurate measuring technology and robust design are practical features which impress on a daily basis. The Control Unit is the supplement to the testo 350 analyzer unit (please order separately) – it enables you to control emission measurement.
    • testo 350 Analysis Box just as easy to use when not positioned at measurement site

    • Internal memory for receiving measurement data from the Analysis Box

    • Large graphic color display, robust, industrial-type housing

    • User-friendly application-specific menu guide

  • testo 885 Kit - Thermal imager with two lenses

    Order-Nr. 0563 0885 X2

    Professional industrial and building thermography: make sure you get the testo 885 professional thermal imager in a kit that includes SuperResolution and comprehensive accessories.
    • testo 885 professional thermal imager: resolution 320 x 240 pixels, upgradable to 640 x 480 pixels with SuperResolution, thermal sensitivity < 30 mK

    • Choice of lenses between 30° x 24° standard lens, 25° x 19° lens and 11° x 9° telephoto lens – you are free to choose two lenses

    • Assistance functions for efficient measurement: SiteRecognition, panoramic image, process analysis package with sequence capturing and radiometric video (latter optional)

    • Also included in the kit: licence-free testo IRSoft professional software, lens protection glass, spare rechargeable battery and fast charging station

  • testo 885 Kit - Thermal imager with three lenses

    Order-Nr. 0563 0885 X3

    Professional industrial and building thermography: make sure you get the testo 885 professional thermal imager in a kit that includes SuperResolution and comprehensive accessories.
    • testo 885 professional thermal imager: resolution 320 x 240 pixels, upgradable to 640 x 480 pixels with SuperResolution, thermal sensitivity < 30 mK

    • Lenses: 30° x 24° standard lens, 25° x 19° lens and 11° x 9° telephoto lens included in the scope of delivery

    • Assistance functions for efficient measurement: SiteRecognition, panoramic image, process analysis package with sequence capturing and radiometric video (latter optional)

    • Also included in the kit: licence-free testo IRSoft professional software, lens protection glass, spare rechargeable battery and fast charging station

  • testo 890 kit - Thermal imager with two lenses

    Order-Nr. 0563 0890 X2

    The testo 890 thermal imager means you are ideally equipped both for professional industrial thermography and for building thermography: e.g. for inspecting voltage systems, high-temperature measurement, circuit board analysis, control of solar plants, complete building shell thermography and building thermography for energy consultancy.
    • testo 890 professional thermal imager: resolution 640 × 480 pixels, upgradable to 1280 × 960 pixels with SuperResolution technology, thermal sensitivity < 40 mK

    • Choice of lens between standard, 25° and telephoto lens – you are free to choose two lenses

    • Sequence capturing in the instrument a possible option, humidity calculation, SiteRecognition, panorama image assistant, JPEG storage function and other practical features

    • Integrated digital camera, optionally exchangeable lenses, many more features, large scope of delivery including transport case, memory card, professional software, etc.

  • testo 890 Set - Thermal imager with three lenses

    Order-Nr. 0563 0890 X3

    The testo 890 thermal imager means you are ideally equipped both for professional industrial thermography and for building thermography: e.g. for inspecting voltage systems, high-temperature measurement, circuit board analysis, control of solar plants, complete building shell thermography and building thermography for energy consultancy.
    • testo 890 professional thermal imager: resolution 640 × 480 pixels, upgradable to 1280 × 960 pixels with SuperResolution technology, thermal sensitivity < 40 mK

    • Three lenses included in the kit: standard, 25° and telephoto lens

    • Sequence capturing in the instrument a possible option, humidity calculation, SiteRecognition, panorama image assistant, JPEG storage function and other practical features

    • Integrated digital camera, many more features, large scope of delivery including transport case, memory card, professional software, etc.

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8764

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Industrial probe kit 1200°C

    Order-Nr. 0600 7610

    Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.
    • Can be used in combination with testo 340 and testo 350

    • Additional inline filter to protect the gas sampling hose from contamination

    • Unheated sampling tube (1 200 °C) can be extended up to max. 3 m using optional extension tubes

    • Very easy to handle

  • Modular flue gas probe, 335 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9766

    The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Modular flue gas probe, 700 mm, Ø 8 mm, Tmax 500 °C

    Order-Nr. 0600 9767

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 500 °C

  • Modular flue gas probe 700 mm, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0600 8765

    The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 °C and quick-change click system (for quick replacement of the probe shaft).
    • Easy probe shaft replacement via quick-change click system

    • NO2/SO2 special hose (length: 2.2 m)

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Modular flue gas probe with pre-filter, Ø 14 mm, 700 mm, Tmax 1000°C

    Order-Nr. 0600 8767

    The modular flue gas probe with preliminary filter Ø 14 mm, 700 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Flue gas probe for industrial engines

    Order-Nr. 0600 7555

    The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 °C.
    • Additional particle filter in the hose provides protection from contamination

    • Probe shaft is easy to replace

    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct

    • Temperature measurement possible with optional thermocouple

  • Stainless steel Pitot tube, length 750 mm - for measuring flow velocity, including temperature measurement

    Order-Nr. 0635 2042

    Robust Pitot tube for measuring flow velocity: the Pitot tube provides the optimum conditions, especially for higher flow velocities and for heavily contaminated flow. The 750 mm long Pitot tube has integrated temperature measurement and a connection hose with a maximum load capacity of up to 700 hPa (mbar).
    • For measuring flow velocity

    • Ideal for high flow velocities and heavily contaminated flow

  • Modular flue gas probe with pre-filter, 335 mm, Ø 14 mm, Tmax 1000°C

    Order-Nr. 0600 8766

    The modular flue gas probe with preliminary filter Ø 14 mm, 335 mm long probe shaft, thermocouple up to 1000 °C and quick-change click system (for quick probe shaft replacement).
    • Easy probe shaft replacement via quick-change click system

    • Preliminary filter offers protection from dusty flue gases

    • Flue gas path and temperature channel can be connected to the instrument via a bayonet lock

    • Integrated thermocouple probe for temperature measurements up to 1000 °C

  • Thermocouple for engine probe

    Order-Nr. 0600 8898

    You can use the thermocouple to measure the flue gas temperature in parallel with flue gas measurement on industrial engines
    • Temperature measurement in parallel with the flue gas measurement on industrial engines

    • Thermocouple with fast response time

    • Can be installed on-site by the user

    • Heat protection handle for comfortable handling even at high temperatures

  • testo easyEmission software

    Order-Nr. 0554 3334

    The testo easyEmission PC software offers numerous functions for convenient measurement data management.
    • Convenient measurement data management

    • Including USB connection cable

  • Heated industrial probe set

    Order-Nr. 0600 7630

    Ideal for official emission measurement (compliance testing): the heated industrial probe kit comprises a heated probe shaft up to 600°C flue gas temperature, a heated gas sampling hose (length 4 m) and a thermocouple type K – this means you are ideally equipped.
    • Measurements in applications with flue gas temperatures of up to 600 °C

    • Short time needed to set up the heated industrial probe (ready for operation in 20 minutes maximum)

    • A high degree of measuring accuracy, even if the flue gas contains high concentrations of NO2 or SO2

    • Very easy to handle

  • Flue gas probe with preliminary filter for industrial engines

    Order-Nr. 0600 7556

    The flue gas probe from Testo makes it possible to carry out efficient flue gas measurements on industrial engines. In the case of diesel engines, the permanently welded-on preliminary filter provides protection from diesel particulates. It can be used at flue gas temperatures of up to 1,000 °C.
    • Additional particle filter in the hose provides protection from contamination

    • Useful for measurements on diesel engines: preliminary filter provides protection from diesel particulates

    • Made of metal: no melting of the handle due to radiated heat from the flue gas duct

    • Temperature measurement possible with optional thermocouple

25 Products found
Prikaži več