Building materials

Order-Nr. 0632 3510

• Increased measurement range for unlimited measurements even when gas concentrations are higher
• Easy-to-change gas sensors and easy access to wearing parts

Order-Nr. 0632 3340

• Can measure CO, COlow, NO, NO_low, NO₂ or SO₂
• Extended measuring range for use in environments with high gas concentrations

Order-Nr. 0632 3511

• testo 350 Analysis Box just as easy to use when not positioned at measurement site
• Internal memory for receiving measurement data from the Analysis Box

Order-Nr. 0563 3503

• With DNV GL and NK certificate according to MARPOL Annexe VI and NOx Technical Code 2008
• Unrestricted availability thanks to pre-calibrated gas sensors which are exchangeable on site

Order-Nr. 0602 0393

• Fast response time (3 seconds) thanks to the thermocouple strip
• Thermocouple type K

Order-Nr. 0602 5093

• S 3 temperaturnimi sondami (termoelement tipa K, razred 1), brezžičnimi in brez ročaja, združljivimi tako z vsemi merilnimi instrumenti Testo kot tudi vsemi standardnimi merilnimi instrumenti s termoelementom tipa K
• Idealna za merjenje temperature v širokem obsegu uporab

Order-Nr. 0602 1293

• Thermocouple type K
• Response time of 7 seconds

Order-Nr. 0636 9735

• Humidity sensor with long-term stability
• Temperature measuring range: -20 to +70 °C

Order-Nr. 0602 4892

• Self-adhesive thanks to a magnet: probe for measuring surface temperature on metal surfaces
• Adhesive force approx. 10 N

Order-Nr. 0602 1793

• Thermocouple type K 
• Short response time thanks to the exposed sensor 

Order-Nr. 0602 4592

• With clamping bracket: enables quick, easy attachment of the probe to pipes with a diameter of 5 to 65 mm
• TC Type K temperature probe with 1.2 m cable

Order-Nr. 0613 1212

• NTC temperature sensor
• Waterproof

Order-Nr. 0602 0593

• Short response time of 2 seconds
• Very large measuring range: -60 to +1000 °C

Order-Nr. 0602 1993

• Extra-wide measuring tip for flat surfaces
• Thermocouple type K

Order-Nr. 0613 1712

• NTC temperature sensor
• High level of accuracy of up to ±0.2 °C 

Order-Nr. 0602 0693

• Low-mass probe: very short response time for accurate measurement results
• Thermocouple type K

Order-Nr. 0602 0993

• Fast response time (3 seconds) thanks to the thermocouple strip
• Thermocouple type K

Order-Nr. 0613 1912

• NTC temperature sensor
• Measuring accuracy of up to ±0.2 °C

Order-Nr. 0613 4611

• With Velcro: makes it easy to attach the surface probe to pipes with a pipe diameter of up to 75 mm
• NTC temperature probe with cable

Order-Nr. 0602 2693

• 1.5 mm thin probe tip for fast temperature recording, 60 mm long probe shaft
• Very short response time of 3 seconds

Order-Nr. 0602 0743

• For the measurement of radiant heat according to ISO 7243, ISO 7726, DIN EN 27726 and DIN 33403
• Thermocouple type K 

Order-Nr. 0600 8764

• Easy probe shaft replacement via quick-change click system
• NO₂/SO₂ special hose (length: 2.2 m)

Order-Nr. 0636 2161

• Probe for relative humidity and air temperature measurements
• Measurements of the material equilibrium moisture content possible

Order-Nr. 0618 7220

• For determining Wet Bulb Globe Temperature (WBGT)
• Reliable assessment of workplaces exposed to heat according to ISO 7243 and DIN 33403-3