Temperature measurement

The functional testing of ventilation and air conditioning systems includes monitoring the flow speed in ventilation ducts. If the air flow velocity and volumetric flow are not set correctly, the room air quality may suffer. The testo 425 thermal anemometer measures the flow speed and automatically calculates the volumetric flow.

• Temperature and flow measurement as well as volumetric flow calculation

• Permanently attached extendible telescopic probe – maximum length 820 mm, diameter 7.5 mm

• With single and multi-point averaging

• Hold function, display of min/max value, Auto-off function

The testo 830-T1 infrared thermometer allows efficient, non-contact surface temperature measurements to be carried out. The IR thermometer will leave you well equipped, especially for control readings in trade and industry: The gun-style design is easy to handle and the integrated processor provides accurate measurement results.

• Infrared thermometer for non-contact surface temperature measurements

• 10:1 optics and high resolution processor for accurate measurement results

• Easy to use thanks to the gun-style design

• Adjustable emission level

The testo 830-T2 infrared thermometer enables you to carry out efficient, non-contact surface temperature measurements. The IR thermometer will ensure that you are well equipped, especially for undertaking control measurements in trade and industry: the gun-style design is easy to handle and the integrated processor provides accurate measurement results.

• Infrared thermometer for non-contact surface temperature measurements

• 12:1 optics and high resolution processor for accurate measurement results

• Contact measurement possible with connectable temperature probe (TC type K)

• Adjustable emission level

With the testo 405i hot wire anemometer, you can measure air velocities, temperatures and volume flows. Via Bluetooth, the readings are transmitted wirelessly straight to the testo Smart Probes App on your smartphone or tablet. You can view the values conveniently and use numerous intelligent features:

• for measuring volume flow, air velocity and temperature

• Simple configuration of the dimension and geometry of the duct cross-section for determining the volume flow

• Convenient for working in ventilation ducts thanks to its telescopic tube, which can be extended up to 400 mm

• Really convenient to operate thanks to the testo Smart Probes App (e.g. easy viewing of readings, measurement data trend, log function)

With the Testo Smart Probes VAC set, you can check air velocities, humidity, volume flows and temperatures in, on and around air conditioning systems. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

• Easy parametrization of the outlet/duct cross-section for measuring the volume flow

• List of multiple volume flows and calculation of the total volume flow (in the log)

• Identification of mould risk thanks to the combined utilization of testo 605i and testo 805i

• Rapid image documentation with IR temperature readings and measuring spot marking

Use the testo 405 thermal anemometer to measure air velocity, volumetric flow and air temperature. It is suitable for carrying out quick check measurements in ventilation ducts and for measuring the air velocity in rooms, e.g. at draughty windows.

• Measurement of air velocity, volumetric flow and air temperature

• For measurements in ventilation ducts and in rooms

• Particularly precise in the range between 0 and 2 m/s

• Telescope extendible to 300 mm

Vane anemometer with telescopic sensor – ideal for carrying out airflow measurements in air ducts.

• Permanently connected telescopic sensor – maximum length 890 mm, diameter 16 mm

• Airflow measurements, selective and time mean values for calculating air volume

• Hold function; min/max display; auto power off

• Calibration certificate and batteries included

Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.

• High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

• High-precision, integrated pressure sensor included

• Pro-software for easy and efficient analysis and logging included

• Intelligent calibration concept

Cold storage rooms, cold storage warehouses, outdoors: the testo 110 digital temperature meter shows what it’s really made of when temperatures start to drop. Thanks to the NTC technology tucked away inside, it can measure temperatures in very low temperature environments.

• Extremely accurate, also in very low temperature ranges, i.e. cold storage rooms

• Optional connectable temperature sensor and wireless sensor for different applications in the field

• Audible alarm, user-defined thresholds

• HACCP compliant, certified according to EN 13485 for use in the food sector

Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.

• Permanently installed vane with a diameter of 40 mm

• Measurement of air velocity, air temperature and humidity

• Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force

• Includes single-point averaging, max/min and Hold function

The testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.

• Vane anemometer with permanently installed 40 mm vane

• Measurement of air velocity and air temperature

• Calculates wind chill and the Beaufort wind force

• Practical: with single-point averaging, max/min and Hold function

The testo 810 infrared thermometer allows the simultaneous measurement of the air temperature and surface temperature of the object being measured - without contact. The infrared temperature measuring instrument automatically displays the temperature difference. This makes it particularly suitable for use in the heating, ventilation and air conditioning trade.

• Simultaneous measurement of the surface temperature and air temperature

• Non-contact measurement of the surface temperature (infrared thermometer)

• Display of the temperature difference

• Adjustable emission level

The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.

• Includes pressure difference sensor for pitot static tube measurements or filter monitoring

• Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

• Super-size memory for up to 10 000 measurements

• PC software for analyzing and logging measuring data

Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Probes App enables readings to be viewed conveniently and offers intelligent additional functions.

• Measurement of air velocity, volume flow and temperature

• Display of the volume flow of multiple outlets in order to adjust systems

• Easy parametrization of the outlet (dimension and geometry)

• Convenient viewing of readings on a smartphone/tablet with the testo Smart Probes App

Make sure you get the testo 417 vane anemometer with an integrated 100 mm vane, in a set that includes two measurement funnels and other accessories. This will mean you are ideally equipped for volumetric flow measurement at ventilation grilles and poppet valves.

• testo 417 vane anemometer for measuring flow velocity, volumetric flow and temperature

• Attachable measurement funnels make it ideal for volumetric flow measurement at ventilation outlets

• Simple testing of incoming / outgoing air in controlled ventilation of living spaces

• Important accessories included in the set: measurement funnels for poppet valves and ventilation grilles, along with a bag for storage

The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!

• Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

• Super-size memory for up to 10 000 readings

• Displays dew point difference, min, max and mean values

• PC software for analyzing and logging measuring data

Determine the noise level quickly, easily and reliably in your day-to-day work: with the testo 815 sound level meter.

• Frequency evaluation according to characteristic curves A and C

• Easy to adjust (adjustment screwdriver included in the scope of delivery)

• Min./max. memory

• Integrated tripod knuckle screw (1/4 inch)

The testo 830-T4 infrared thermometer also achieves accurate results at greater distances during non-contact surface temperature measurement. This is provided by its 30:1 optics and powerful processor. The infrared temperature measuring instrument carries out measuring tasks in trade and industry quickly and efficiently.

• Infrared thermometer for non-contact measurement of surface temperatures

• Accurate results thanks to its 30:1 optics and high resolution processor

• One-handed operation is easy thanks to the gun-style design

• One temperature probe can be connected for additional contact measurement (optional)

Combined with a smartphone or tablet, the testo 115i clamp thermometer is the ideal temperature measuring instrument for carrying out servicing and troubleshooting on air conditioning and refrigeration systems, as well as for installing them. It can also be used to measure flow and return temperatures.

• Measurement of the flow and return temperature of heating systems

• Measurement of temperatures in refrigeration systems in order to calculate superheating and subcooling

• Easy to use at measuring points that are far apart

• Rapid detection of temperature changes via graphical progress display

Get the testo 417 vane anemometer with integrated 100 mm vane now, in a set that includes two measurement funnels, a volume flow straightener and other accessories. This ideally equips you to carry out volume flow measurement at plate outlets, ventilation grilles and swirl outlets.

• testo 417 vane anemometer for measuring air flow velocity, volume flow and temperature

• Attachable measurement funnels make this ideal for measuring volume flow at ventilation outlets

• Also suitable for swirl outlets: thanks to the flow straightener, precise measurements can also be taken at swirl outlets

• Important accessories included in the set: measurement funnels, flow straightener and a bag for storage