Pressure

104 Products or Recomendations for Pressure
  • testo 324 gas and water set - Pressure and leakage measuring instrument

    Order-Nr. 0563 3240 77

    The complete package for testing water and gas pipes in compliance with directives: in addition to the testo 324 pressure and leakage measuring instrument with Bluetooth® interface, including system case with feeding unit, the set also contains a high-pressure probe, a high-pressure connection, a Y-distributor and other important accessories.

    • All the important measurements in one instrument: tightness test, load test and serviceability test

    • DVGW-tested pressure and leakage measuring instrument

    • Automatic determination of pipe volume in gas pipes

    • Step-by-step guide through regulatory-compliant measurement menus: check water and gas pipes really easily

  • testo 510 set - differential pressure measuring instrument

    Order-Nr. 0563 0510

    Differential pressure measurement on gas hot water heaters or on filters of air conditioning systems, and also flow measurements in ventilation ducts using a Pitot tube: the compact testo 510 differential pressure measuring instrument, which comes with a silicone connection hose and other useful accessories, can help you maintain and install systems in the sanitary and HVAC sector.

    • Differential pressure measurement from 0 to 100 hPa 

    • Flow measurement possible with a Pitot tube (available as an option)  

    • Magnets on the rear allow hands-free work 

    • 10 units to choose from, display in pascals can be selected 

    € 129,00
    € 157,38 z DDV-om
  • testo 557 set - Digital manifold

    Order-Nr. 0563 1557

    The testo 557 digital manifold fulfils numerous functions, which are required for working on refrigeration systems and heat pumps, in just one instrument: for example superheating/subcooling calculation, vacuum measurement, temperature-compensated leakage test. You can also use a practical app to monitor the manifold via your smartphone/tablet and store the measurement results or send them by e-mail.

    • Calculation of superheating and subcooling in real time: no manual calculation, which is prone to error

    • Connect to smartphone/tablet app: remote monitoring and smart measurement documentation

    • Precise external Pirani gauge for vacuum measurement, temperature-compensated leakage test, automatic ambient pressure measurement

    • The 60 most common refrigerants are stored in the instrument, subsequent updates possible (via app)

    € 419,00
    € 511,18 z DDV-om
  • testo 480 - Digital temperature, humidity and air flow meter

    Order-Nr. 0563 4800

    Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device.

    • High-quality optional sensors for measuring air flow, temperature, humidity, pressure, degree of turbulence, heat radiation, CO2, illumination intensity, PMV/PPD and WBGT

    • High-precision, integrated pressure sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 420 - volume flow hood

    Order-Nr. 0563 4200

    Make sure you get the testo 420 volume flow hood for larger ceiling outlets and at the same time enjoy multiple maintenance benefits on HVAC systems. Because the flow hood with the removable measuring instrument is not only exceptionally light, it also guarantees accurate volume flow calculations at swirl outlets

    • Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity

    • Impressively light with a weight of 2.9 kg

    • Precise measurement even at swirl outlets thanks to integrated volume flow straightener

    • Fast set-up, convenient operation and protocol creation on site using the App

    € 2.000,00
    € 2.440,00 z DDV-om
  • testo 550 - Digital manifold

    Order-Nr. 0563 1550

    The testo 550 digital manifold can now make working on refrigeration systems and heat pumps even easier: the instrument can be used for 60 refrigerants, calculates superheating/subcooling automatically and can now also be connected to a practical smartphone/tablet app. The app makes the operation and the documentation of measurement results significantly more convenient.

    • Automatic superheating/subcooling calculation: no more need for manual calculations, which are prone to error

    • With a practical app: (remote) display, graphical progress display, documentation of readings

    • Temperature-compensated leakage test

    • 60 current refrigerants are included in the manifold (update possible via app)

    € 307,00
    € 374,54 z DDV-om
  • testo Smart Probes Refrigeration set - with smartphone operation

    Order-Nr. 0563 0002

    The testo Smart Probes Refrigeration set is ideal for carrying out servicing and troubleshooting on air conditioning and refrigeration systems, as well as for installing them. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

    • Low refrigerant loss thanks to hose-free application

    • Quick and easy installation directly at the pressure connection

    • Easy refrigerant selection

    • Automatic calculation of the evaporation and condensation temperature via testo Smart Probes App

    € 220,00
    € 268,40 z DDV-om
  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.

    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

    € 700,00
    € 854,00 z DDV-om
  • testo Smart Probes heating set - with smartphone operation

    Order-Nr. 0563 0004

    With the Testo Smart Probes Heating set, you can measure and check all heating system temperatures and pressures in conjunction with your smartphone. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

    • Measurement of gas flow and static pressure

    • Non-contact temperature measurement on underfloor heating systems and radiators

    • Measurement menu for pressure drop test, including alerts via testo Smart Probes App

    • Rapid image documentation with IR temperature readings and measuring spot marking

    € 210,00
    € 256,20 z DDV-om
  • testo 570-2 - Digital manifold gauge

    Order-Nr. 0563 5702

    The testo 570-2 is a digital 4-way manifold gauge that combines the functions of all the old tools and measuring instruments it can so easily replace. The hvac manifold can measure, analyze and log – among other things – pressure, temperature, electricity and vacuum measurements.

    • 40 refrigerants already stored in the meter

    • Simultaneous superheat and subcooling calculation

    • 999 hours of measuring data for logging and further evaluation on your PC

    • Includes 2-clamp temperature sensor, PC software, USB cable, power adaptor and carry case

    € 685,00
    € 835,70 z DDV-om
  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.

    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 635-2 - Temperature and moisture meter

    Order-Nr. 0563 6352

    The testo 635-2 temperature and moisture meter allows you to carry out temperature and moisture measurements on a variety of different materials, surfaces and environments. This is made possible due to leading-edge technology and a wide selection of optionally available sensors.

    • Optionally available sensors for moisture, temperature, pressure dew point and absolute pressure measurements

    • 2 plug-in sensors and 3 wireless sensors can be connected

    • Super-size memory for up to 10 000 readings

    • USB cable and PC software for archiving and logging measuring data included

    € 399,00
    € 486,78 z DDV-om
  • testo 512 - Differential pressure meter for 0…200 hPa

    Order-Nr. 0560 5128

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 377,00
    € 459,94 z DDV-om
  • testo 570-1 Set - Digital manifold

    Order-Nr. 0563 5701

    Purchasing the testo 570-1 digital manifold will ideally equip you to carry out quick, reliable measurements on refrigeration systems and heat pumps: carry out pressure, temperature, current and vacuum measurements as well as temperature-compensated tightness tests. Moreover, it calculates superheating and subcooling simultaneously.

    • 40 refrigerants are stored in the instrument

    • Calculation of superheating and subcooling possible in parallel

    • 999 hours of recording readings

    • Set includes a clamp temperature probe for measuring the surface temperature of pipes

    € 531,00
    € 647,82 z DDV-om
  • testo 549 - Digital manifold

    Order-Nr. 0560 0550

    The testo 549 digital manifold offers many advantages in comparison with analog manifolds: the instrument will make it easier for you to work on refrigeration systems and heat pumps. With its integrated temperature measurement and automatic calculation of superheating/subcooling, you can now do away with additional measurements and manual comparisons (when using an optional clamp probe). You can also use the manifold for 60 current refrigerants.

    • 60 current refrigerants stored in the instrument

    • Calculation of superheating and subcooling in real time (with optional clamp probe): saves you from having to carry

    • Temperature-compensated leakage test

    • Two temperature-compensated pressure sensors

    € 220,00
    € 268,40 z DDV-om
  • testo 635-2 U-value promo set - thermohygrometer set

    Order-Nr. 0563 6353

    The U-value is the most important value for proving the heat loss of a building. With the testo 635-2 thermohygrometer and compatible accessories from the U-value set, determining the U-value is now easier than ever.

    • Evaluate renovation measures quickly and flawlessly

    • Easy probe attachment, even in inaccessible places

    • Proof of service thanks to report creation 

    • Integrated memory and easy evaluation with PC software

    € 959,00
    € 1.169,98 z DDV-om
  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!

    • Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10 000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

    € 519,00
    € 633,18 z DDV-om
  • testo 512 - Differential pressure meter for 0…20 hPa

    Order-Nr. 0560 5127

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0….20 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 5 and 55 m/s.

    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 377,00
    € 459,94 z DDV-om
  • testo 550 digital manifold kit - with Bluetooth® and set of 3 filling tubes

    Order-Nr. 0563 2550

    The practical kit makes it even easier to work on air conditioning and refrigeration systems: the testo 550 digital manifold, including set of 3 filling tubes, enables you to get down to work straight away! The instrument can be used for 60 refrigerants, calculates superheating/subcooling automatically and can be connected to your smartphone/tablet via the testo refrigeration App. Thanks to the App, the display and documentation of the measurement results are particularly convenient.

    • Extensive accessories included: set of 3 filling tubes, 2 x clamp temperature probes and transport case

    • Automatic superheating/subcooling calculation for 60 refrigerants: no more need for error-prone manual calculations

    • With a practical App: (remote) display, graphical progression display, documentation of readings and refrigerant updates

    • Temperature-compensated leakage test

  • testo 557 digital manifold kit - with Bluetooth® and set of 4 filling tubes

    Order-Nr. 0563 2557

    Practical kit for work on air conditioning and refrigeration systems, as well as on heat pumps: the testo 557 digital manifold, including set of 4 filling tubes, enables you to get down to work straight away! The testo 557 digital manifold fulfils numerous functions in just one instrument: including superheating/subcooling calculation, vacuum measurement and temperature-compensated leakage test. You can also use a practical App to monitor the manifold via your smartphone/tablet and to store the measurement results or send them by e-mail.

    • Extensive accessories included: set of 4 filling tubes, 2 x clamp temperature probes, precise external Pirani gauge for vacuum measurement and transport case
       

    • Calculation of superheating and subcooling in real time for 60 refrigerants: no error-prone manual calculation

    • Connection to smartphone/tablet App: remote monitoring, clever measurement documentation and refrigerant updates

    • Temperature-compensated leakage test, automatic ambient pressure measurement

104 Products found
Prikaži več