Ventilation Duct

Observance of air flows in the ventilation duct is of utmost importance for the function of the ventilation and air conditioning system. If the air flows are smaller than intended, the removal of room loads (heating, cooling and substance loads) may not be ensured in certain circumstances. Therefore, the most accurate recording of air flows as possible is particularly important.

27 Products or Recomendations for Ventilation Duct
  • testo 435-2 - Indoor air quality meter

    Order-Nr. 0563 4352

    The testo 435-2 indoor air quality meter allows you to carry out all the measurements that are necessary to check and adjust ventilation and air conditioning systems and assess the quality of the indoor air. Select from a wide range of probes and sensors. Because it’s you know best what your meter needs to be able to do!
    • Comprehensive range of measuring functions using optionally available accessories – e.g. anemometers, moisture sensors, lux and degree of turbulence sensors

    • Super-size memory for up to 10 000 readings

    • Displays dew point difference, min, max and mean values

    • PC software for analyzing and logging measuring data

    € 561,00
    z DDV-om  € 684,42
  • testo 425 - Thermal anemometer with flow probe

    Order-Nr. 0560 4251

    The functional testing of ventilation and air conditioning systems includes monitoring the flow speed in ventilation ducts. If the air flow velocity and volumetric flow are not set correctly, the room air quality may suffer. The testo 425 thermal anemometer measures the flow speed and automatically calculates the volumetric flow.
    • Temperature and flow measurement as well as volumetric flow calculation

    • Permanently attached extendible telescopic probe – maximum length 820 mm, diameter 7.5 mm

    • With single and multi-point averaging

    • Hold function, display of min/max value, Auto-off function

    € 415,00
    z DDV-om  € 506,30
  • testo 405 - Thermal anemometer

    Order-Nr. 0560 4053

    Use the testo 405 thermal anemometer to measure air velocity, volumetric flow and air temperature. It is suitable for carrying out quick check measurements in ventilation ducts and for measuring the air velocity in rooms, e.g. at draughty windows.
    • Measurement of air velocity, volumetric flow and air temperature

    • For measurements in ventilation ducts and in rooms

    • Particularly precise in the range between 0 and 2 m/s

    • Telescope extendible to 300 mm

    € 116,00
    z DDV-om  € 141,52
  • testo 416 - Vane anemometer

    Order-Nr. 0560 4160

    Vane anemometer with telescopic sensor – ideal for carrying out airflow measurements in air ducts.
    • Permanently connected telescopic sensor – maximum length 890 mm, diameter 16 mm

    • Airflow measurements, selective and time mean values for calculating air volume

    • Hold function; min/max display; auto power off

    • Calibration certificate and batteries included

    € 445,00
    z DDV-om  € 542,90
  • testo 405 i - thermal anemometer with smartphone operation

    Order-Nr. 0560 1405

    With the testo 405i hot wire anemometer, you can measure air velocities, temperatures and volume flows. Via Bluetooth, the readings are transmitted wirelessly straight to the testo Smart Probes App on your smartphone or tablet. You can view the values conveniently and use numerous intelligent features:
    • for measuring volume flow, air velocity and temperature

    • Simple configuration of the dimension and geometry of the duct cross-section for determining the volume flow

    • Convenient for working in ventilation ducts thanks to its telescopic tube, which can be extended up to 400 mm

    • Really convenient to operate thanks to the testo Smart Probes App (e.g. easy viewing of readings, measurement data trend, log function)

    € 95,00
    z DDV-om  € 115,90
  • testo 512 - Differential pressure meter for 0…200 hPa

    Order-Nr. 0560 5128

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 385,00
    z DDV-om  € 469,70
  • testo 510 set - differential pressure measuring instrument

    Order-Nr. 0563 0510

    Differential pressure measurement on gas hot water heaters or on filters of air conditioning systems, and also flow measurements in ventilation ducts using a Pitot tube: the compact testo 510 differential pressure measuring instrument, which comes with a silicone connection hose and other useful accessories, can help you maintain and install systems in the sanitary and HVAC sector.
    • Differential pressure measurement from 0 to 100 hPa 

    • Flow measurement possible with a Pitot tube (available as an option)  

    • Magnets on the rear allow hands-free work 

    • 10 units to choose from, display in pascals can be selected 

    € 132,00
    z DDV-om  € 161,04
  • testo 512 - Differential pressure meter for 0…2 hPa

    Order-Nr. 0560 5126

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0…2 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 2 and 17,5 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 385,00
    z DDV-om  € 469,70
  • testo 512 - Differential pressure meter for 0…20 hPa

    Order-Nr. 0560 5127

    The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0….20 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 5 and 55 m/s.
    • 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg

    • 2 air flow units to select from: m/s, fpm

    • Integrated density compensation

    • Backlit display, min/max values, hold function

    € 385,00
    z DDV-om  € 469,70
  • testo 521-1 - differential pressure measuring instrument (0.2 % of f.v.)

    Order-Nr. 0560 5210

    The high-precision testo 521-1 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.
    • Integrated differential pressure sensor with an accuracy of 0.2 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes

    € 734,00
    z DDV-om  € 895,48
  • testo 435-3 - Multi-function climate measuring instrument

    Order-Nr. 0560 4353

    testo 435-3 – multi-function climate measuring instrument with integrated differential pressure measurement. You can use this to carry out measurements which you need to adjust ventilation and air conditioning systems and assess room air quality. For this we offer a comprehensive range of optional probes and sensors to choose from.
    • Includes differential pressure measurement for filter monitoring or for measurement with a Pitot tube

    • Further optional probes can be attached: thermal and vane anemometers, along with probes for air humidity, CO2, absolute pressure and temperature

    • Display of dew point distance, min., max. and mean values

    • Illuminated display

    € 712,00
    z DDV-om  € 868,64
  • testo 521-2 - differential pressure measuring instrument (0.1 % of f.v.)

    Order-Nr. 0560 5211

    The high-precision testo 521-2 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.
    • Integrated differential pressure sensor with an accuracy of 0.1 % of f.v.

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Multi-point and timed mean calculation

    • 2 probe inputs for additional pressure and temperature probes
       

    € 917,00
    z DDV-om  € 1.118,74
  • testo 445 - climate measuring instrument

    Order-Nr. 0560 4450

    You can keep a close eye on indoor air quality with the testo 445 climate measuring instrument: the allrounder can measure up to 6 parameters (with the appropriate probe), which can help you make a professional assessment of indoor air quality. The climate measuring instrument therefore supports you in adjusting and checking ventilation and air conditioning systems.
    • Multi-function climate measuring instrument: measure up to 6 measurement parameters at the same time

    • Internal reading memory for up to 3,000 readings

    • Automatic allocation of the duct cross-section to the measuring location (max. 99 measuring locations)

    • Automatic mean value calculation and determination of the volume flow

  • testo 521-3 - Differential pressure measuring instrument (up to 2.5 hPa)

    Order-Nr. 0560 5213

    The testo 521-3 high-precision differential pressure measuring instrument easily determines even the smallest differential pressures (up to +2.5 hPa). Its high accuracy and a resolution of 0.1 Pa make the instrument ideal for differential pressure measurements in clean rooms or for flue inspections.
     
    • Integrated temperature-compensated differential pressure sensor with accuracy of up to ± 0.5 Pa

    • Calculation of the flow velocity and the volume flow via Pitot tube (optional)

    • Direct zeroing of the display values of pressure probes

    • 2 probe inputs for additional pressure and temperature probes
       

    € 754,00
    z DDV-om  € 919,88
  • testo 435-4 - Multifunction indoor air quality meter

    Order-Nr. 0563 4354

    The testo 435-4 multifunction indoor air quality meter allows you to carry out all the measurements you need to inspect and adjust ventilation and air conditioning systems and to check the quality of the indoor air. There is also an integrated pressure difference sensor for pitot static tube measurements and filter monitoring and a wide range of optionally available sensors and probes to choose from.
    • Includes pressure difference sensor for pitot static tube measurements or filter monitoring

    • Further sensors optionally available (eg. anemometer, moisture sensors, lux and degree of turbulence sensors) for a variety of different measuring applications

    • Super-size memory for up to 10 000 measurements

    • PC software for analyzing and logging measuring data

    € 756,00
    z DDV-om  € 922,32
  • testo Smart Sonde HVAC/R Vrhunski kit

    Order-Nr. 0563 0002 31

    Vrhunski kit za inženirje na polju grelnih, klima, hladilnih in prezračevalnih sistemov: Kit vsebuje vse testo Smart Sonde in je popoln za izvajanje funkcionalnih kontrol ali vzdrževanje obrata (pogona), v kombinaciji z vašim pametnim telefonom/tabličnim računalnikom. Zahvaljujoč testo Smart Probes Aplikaciji, lahko delate lažje in učinkovitejše: Avtomatski izračunajte številne parametre kot so pregrevanje/podhlajevanje, ciljnoo pregrevanje, moč hlajenja/ogrevanja, diferencialne temperature ali detekcije plesni. Na koncu, poročilo o merilnih podatkih se lahko pošlje direktno po e-pošti kot PDF ali Excel datoteka.
    • Za vsa merjenja, ki vključujejo grelne, klima, hladilne in prezračevalne sisteme

    • Vse Smart Sonde za merjenje temperature, pritiska, vlažnosti in hitrosti pretoka v enem kitu

    • Prikaz trenda merilnih podatkov v obliki grafikona ali tabele

    • Prenos in analiza merilnih podatkov s pomočjo Testo Smart Probes Aplikacije

    € 820,00
    z DDV-om  € 1.000,40
  • Testo Smart Sonde VAC kit

    Order-Nr. 0563 0003 10

    Za inženirje klima sistemov: Kompaktni kit, ki vsebuje štiri merilna instrumenta za vaše najpomembnejše aktivnosti merjenja na in v odnosu na klima sisteme. Zahvaljujoč testo Smart Probes Aplikaciji, lahko delate lažje in učinkovitejše: Uporabljajte intuitivne merilne menije za merjenje pretoka zraka, avtomatski izračun točke kondenzacije in temperature vlažnega termometra ali za prepoznavanje področja s morebitno plesnijo, po načelu semaforja. Na koncu, poročilo o merilnih podatkih se lahko pošlje direktno po e-pošti kot PDF ali Excel datoteka.
    • Merjenje temperature zraka in površine, vlažnosti, hitrosti in pretoka zraka.

    • Specifični aplikacijski meniji: merjenje pretoka zraka v ceveh in na odprtinah za dovod zraka, prepoznavanje tveganja od plesni, enostavno slikovno dokumentiranje, vključno z vrednostjo infrardečega merjenja temperature ter natančnega merjenja na licu mesta

    • Prikaz merilnih podatkov v obliki grafikona ali tabele in analiza ter pošiljanje le-teh preko testo Smart Probes Aplikacije

    • V kombinaciji z vašim pametnim telefonom/tabličnim računalnikom izvedite najpomembnejša merjenja, ki se nanašajo na klima sisteme

    € 340,00
    z DDV-om  € 414,80
  • testo 400 - Universal IAQ instrument

    Order-Nr. 0560 0400

    The testo 400 is the universal measuring instrument for all IAQ professionals. Measure, analyze and document all IAQ and comfort level parameters using just one instrument – simply, conveniently and in compliance with the standards. High-quality measuring technology, intuitive measurement assistants, versatile documentation options and a comprehensive selection of IAQ probes make the testo 400 the perfect partner for your day-to-day work.
    • Smart, intuitive measurement programs including HVAC grid measurement as per EN ISO 12599 and ASHRAE 111, PMV/PPD and turbulence as per EN ISO 7730 and ASHRAE 55

    • High-precision, location-independent and integrated differential pressure sensor

    • Measure all IAQ-related parameters – with our wide range of probes for all IAQ measurements

    • Document measuring values directly on the customer's site and send them by e-mail, or further analyze them using the testo DataControl PC software

  • testo 400 air flow kit with 16 mm vane probe

    Order-Nr. 0563 0400 72

    Ideal kit for IAQ professionals, with a focus on air flow measurement. You will receive the testo 400 universal IAQ measuring instrument with intuitive measurement menus, one vane probe head (Ø 16 mm), one vane probe head (Ø 100 mm) and one high-precision humidity/temperature probe head – all three can be attached to the Bluetooth® handle supplied. For measurements at ceiling outlets, simply combine the 100 mm vane probe with the telescope (can be extended up to 1.0 m) and the 90° angle.
    • Standard-compliant determination of the volume flow in ducts using grid measurements as per EN ISO 12599 and ASHRAE 111

    • Determination of the volume flow at outlets by measuring the reference pressure and entering the manufacturer-specific K-factor

    • Smart, intuitive measurement programs, complete your measurement with full documentation on site at the customer’s premises or carry out further analysis using the testo DataControl measurement data management and analysis software

    • In the kit: testo 400 universal IAQ instrument, 16 mm vane probe (with Bluetooth® handle and telescope), vane probe head (Ø 100 mm), high-precision humidity/temperature probe head, 90° angle, case

  • testo 400 air flow kit with hot wire probe

    Order-Nr. 0563 0400 71

    Ideal kit for IAQ professionals, with a focus on air flow measurement. You will receive the testo 400 universal IAQ measuring instrument with intuitive measurement menus, one hot wire probe head (including temperature and humidity sensor), one vane probe head (Ø 100 mm) and one high-precision humidity/temperature probe head – all three can be attached to the Bluetooth® handle supplied. For measurements at ceiling outlets, simply combine the 100 mm vane probe with the telescope (can be extended up to 1.0 m) and the 90° angle.
    • Standard-compliant determination of the volume flow in ducts using grid measurements as per EN ISO 12599 and ASHRAE 111

    • Determination of the volume flow at outlets by measuring the reference pressure and entering the manufacturer-specific K-factor

    • Smart, intuitive measurement programs, complete your measurement with full documentation on site at the customer’s premises or carry out further analysis using the testo DataControl measurement data management and analysis software

    • In the kit: testo 400 universal IAQ instrument, hot wire probe (with Bluetooth® handle and telescope), vane probe head (Ø 100 mm), high-precision humidity/temperature probe head, 90° angle, case

27 Products found
Prikaži več