傳熱係數U值探頭,帶三根電纜

订货号  0614 1635

传热系数U值探头,带三根电缆,用于测量墙面温度,含塑性粘土

产品描述

The U-value (formerly k-value) is the most important value used to rate the energy efficiency of building components. With the new testo 635 measuring this value has never been easier.
Three temperature values are needed to determine the U-value: outer temperature, surface temperature of inner wall as well as indoor air temperature.
Using the new wireless probes, the outer temperature can be quickly and easily measured with the window closed. The probe is simply positioned outside and transmits readings by radio to the measuring instrument in the room.
With the new patented U-value probe the two other temperatures required are measured using one probe. To measure surface temperature, three wires from the U-value probe are attached to the inner wall using modelling clay. The air temperature is measured by a sensor on the probe plug.
The three temperatures needed are determined by the connected temperature probes and transferred to the testo 435. The instrument calculates the U-value from them and shows it directly in the display.

 

Type K (NiCr-Ni)

测量范围

-20 ~ +70 °C

测量精度

1级精度 ¹⁾

U-value: ±(0.1 °C + 0.2 %测量值)*

*when used with an NTC or wireless humidity probe for measuring outside temperature and 20 K difference between the air inside and outside

1符合EN60584-2, 在 -40 ~ +1200 °C 内满足2级精度

标定证书