防水浸入式/刺入式温度探头(K型热电偶)
订货号 0602 1293
防水浸入式/刺入式温度探头用于快速测量液体或半固体中心温度。-
K型热电偶
-
响应时间只需7s
-
防水设计
-
测量范围:-60 至 +400 °C
-
坚固空气探头,K型热电偶
订货号 0602 1793
坚固空气探头,K型热电偶-
Thermocouple type K
-
Short response time thanks to the exposed sensor
-
Can be connected to a wide range of measuring instruments
-
Measuring range: -60 to +400 °C
-
防水浸入式/刺入式温度探头(NTC)
订货号 0613 1212
防水浸入式/刺入式温度探头(NTC),用于快速准确测量液体和半固体温度。-
NTC热敏温度传感器
-
防水设计
-
测量精度高达±0.2 °C
-
测量范围:-50 至 +150 °C
-
热敏风速探头,内置温湿度传感器,直径12 mm,带可伸缩的手柄(最长745mm) - for flow, temperature and humidity
订货号 0635 1535
热敏风速探头,内置温湿度传感器,直径12 mm,带可伸缩的手柄(最长745mm)-
3 functions in 1 probe: measurement of flow, temperature and humidity
-
Probe head diameter: 12 mm – also suitable for measurements in ventilation ducts
-
With telescope (can be extended to 745 mm)
-
Flow measuring range: 0 to +20 m/s
-
温湿度探头, 12mm直径
订货号 0572 6172
温湿度探头, 12mm直径-
快速可靠地测量空气温度和湿度
-
为了连续测量可以安装探头,探针直径12mm
-
量程:湿度0...100%RH;温度-20...+70 °C
-
灵活,快速响应的浸入式探头(K型热电偶)
订货号 0602 0593
灵活,快速响应且防水:此款浸入式探头是精确测量液体温度的理想探头。-
极短响应时间2s
-
超宽测量范围:-60 至 +1000 °C
-
防水
-
K型热电偶
-
IAQ 室内空气质量探头(有线)
订货号 0632 1535
IAQ 室内空气质量探头(与适当的测量仪器配合使用)用于检测室内空气质量。-
4 functions in one probe: measurement of CO2, humidity, temperature and absolute pressure
-
Rapid checking of the indoor climate
-
Prevention of poor air quality in indoor rooms via CO2 measurement
-
高效,坚固NTC空气探头
订货号 0613 1712
高效,坚固NTC空气探头-
NTC temperature sensor
-
High level of accuracy of up to ±0.2 °C
-
Short response time thanks to the exposed sensor
-
Measuring range: -50 to +125 °C
-
柔性热电偶 - 带 TE 型 K 温度传感器 (PTFE)
订货号 0602 0646
带聚四氟乙烯护套 (PTFE) 的柔性热电偶,可快速方便地测量空气温度。-
带 TE 插头的 K 型热电偶
-
由于采用聚四氟乙烯护套 (PTFE),耐热度可达 + 250°C
-
长度 1500 mm(柔性)
-
柔性热电偶 - 带 TE 型 K 温度传感器(玻璃丝)
订货号 0602 0645
带玻璃丝绝缘体的柔性热电偶,可快速方便地测量空气温度。-
带 TE 插头的 K 型热电偶
-
由于采用玻璃丝绝缘体,耐热度可达 +400°C
-
长度 1500 mm(柔性)
-
IAQ 室内空气质量探头
订货号 0632 1543
室内空气质量探头,用于检测室内空气质量,测量CO2,湿度,温度和绝对压力-
一个探头4个功能:测量CO2、温度、湿度和绝对压力
-
快速检测室内空气质量
-
预防室内空气质量变差
-
智能校准
-
柔性热电偶 - 带 K 型热电偶温度传感器(玻璃丝)
订货号 0602 0644
带热电偶插头和玻璃丝绝缘体的柔性热电偶,用于快速、简单地测量温度(组合合适的测量仪)。-
包裹有玻璃丝
-
柔性电缆
-
K 型热电偶
-
快速响应的浸入式/刺入式探头(K型热电偶)
订货号 0602 2693
快速响应温度探头包含浸入式尖端—理想适用于胶质,半固体,液体和空气的测量。-
测量尖端直径只有1.5mm适于快速温度测量,探针长度为60mm
-
极短响应时间3s
-
测量范围:-60 至 +800 °C
-
Splash-proof in accordance with IP54
-
温湿度探头,直径12mm,需配连接电缆0430 0100
订货号 0636 9743
温湿度探头,直径12mm,湿度精度高达1%-
High-precision humidity measurement: accuracy of up to ±1% RH
-
Intelligent calibration concept
-
Temperature measuring range: -20 to +70 °C
-
球形探头,直径150mm,K型热电偶,用于测量辐射热 - for radiant heat
订货号 0602 0743
球形探头,直径150mm,K型热电偶,用于测量辐射热-
For the measurement of radiant heat according to ISO 7243, ISO 7726, DIN EN 27726 and DIN 33403
-
Thermocouple type K
-
Measuring range: 0 to + 120 °C
-
燃烧空气探头,浸入深度190 mm - 环境空气探头,190mm
订货号 0600 9787
燃烧空气探头,浸入深度190 mm-
Flexible positioning (immersion depth 190 mm, cable length 2.2 m)
-
Cone for attachment included
-
Measuring range: 0 to +100 °C
-
热线式风速探头,直径10mm,90度可弯曲,含带刻度及测量按钮的伸缩手柄,需配连接电缆0430 0100 - for flow, temperature, humidity and pressure
订货号 0635 1543
热敏式风速探头,直径10mm,90度可弯曲(弯曲部分200mm),含带刻度及测量按钮的伸缩手柄线(最长1100mm)-
4 functions in 1 probe: measurement of flow, temperature, humidity and absolute pressure
-
With robust, non-rotatable telescope (can be extended to 1100 mm)
-
Intelligent calibration concept
-
Flow measuring range: 0 to +20 m/s
-
紊流度探头,需配连接电缆0430 0100
订货号 0628 0143
舒适度探头,测量紊流度,符合EN 13779的要求。-
Turbulence measurement in accordance with EN 13779
-
Determination of air velocity and draught risk
-
Integrated temperature and ambient pressure measurement
-
Intelligent calibration concept
-
坚固高温湿度探头,耐温达+125 °C, 短时可达+140 °C, - 坚固高温温湿度探头
订货号 0636 2161
坚固湿度探头测量,耐温达+125°C,短时可达+140℃,直径12mm,适于管道,或大宗货物的平衡水分测量。-
Probe for relative humidity and air temperature measurements
-
Measurements of the material equilibrium moisture content possible
-
Temperature measuring range: -20 to +125 °C (briefly up to +140 °C)
-