1. Home
  2. testo552数显式真空表

testo 552 - 数显式真空表真空压力表

0560 5522
  • 利用 testo Smart APP 智能应用程序控制并读取整个测量过程
  • 带有报警和背光功能 
  • 用于在现场创建报告的应用程序
  • 通过电子邮件发送测量报告
  • 高精度测量技术
  • 高坚固性
  • testo 552 数显式真空表带无线蓝牙适用于制冷及热泵系统的真空度检测;精确判断制冷系统的除湿程度及杂质的去除程度。通过 testo Smart APP 智能应用程序可以让您便捷地在智能设备上读取测量数据,在现场完成和发送测量报告。
    • products_smart_app_products_refrigeration_vacuum_img-2000x1500.jpg

      利用智能手机控制并读取整个测量过程

    testo 552 数字真空表,适用于制冷及热泵系统的真空度检测;精确判断制冷系统的除湿程度及杂质的去除程度。例如,油、杂质气体等。
     
    通过蓝牙接口,testo 552与智能设备(手机或平板电脑)上的 testo Smart APP 智能应用程序连接。可以让您便捷地在智能设备上读取测量数据,在现场完成和发送测量报告。
     

    应用领域

    评估安装或重新启动是制冷剂或空调系统重要的步骤之一,必须适当清除异物,湿气和油脂。那时需要测量系统的绝对压力。

    精确判断制冷系统的除湿程度,并且能够绝对可靠地测量甚至最小的绝对压力。这意味着您始终能够遵守制造商的规范。当超过阈值时,会立即发出视觉警报。

    数字真空表的防护等级为IP42(防水和防污),因此不受潮气和污垢的影响。

    testo 552 数显式真空表带无线蓝牙,电池。

    绝压

    测量范围
    0 ~ 26.66 mbar /
    0 ~ 20000 micron
    测量精度
    ±(10 micron + 10 %测量值) (100 ~ 1000 micron)
    分辨率
    10 micron (1000 ~ 2000 micron) /
    100 micron (2000 ~ 5000 micron) /
    1 micron (0 ~ 1000 micron) /
    超载
    absolute: 6.0 bar / 87 psi
    (relative: 5.0 bar / 72 psi)

    技术参数

    重量
    500 g
    尺寸
    160 x 110 x 50 mm
    操作温度
    -10 ~ +50 °C
    防护等级
    IP42
    系统要求
    requires iOS 11.0 or newer; requires Android 6.0 or newer; requires mobile end device with Bluetooth 4.0
    Product colour
    black/orange
    电池类型
    2 x AA
    电池使用时间
    50 hrs (without Bluetooth/backlighting)
    连接
    2 x 7/16“ UNF
    数据传输
    Bluetooth® 4.0 wireless technology
    参数
    mbar; micron; mmHg; Torr; inHg; inH₂O; hPa; Pa
    测量比例
    0.5 s
    存放温度
    -20 ~ +50 °C

    附件


    遵守制造商的规范

    一些制造商会明确说明空调系统抽真空所需的绝对压力以及这种压力需要保持多长时间。testo 552可以灵活设置报警阈值,从而方便快捷地满足上述要求。

    testo-552

    记录测量结果

    如果将testo 552与testo 570数字歧管仪配合使用,可以借助testo 570保存testo 552的测量值,或者通过可选的EasyKool软件在电脑上直接显示它们。

    testo-552

    保证除湿效果

    552不仅可以测量压力,而且可以测量相关的水蒸气温度。另外,它还能测量环境温度,并显示温度差值。因此,可以快速确认系统是否在蒸发水分,除湿操作是否正常。

    testo-552

    制冷系统抽真空

    借助testo 552,可以快速灵活地对制冷系统抽真空,并且精度很高。

    testo-552

    • (1) This is a demo version which will run 30 days on your computer. Within that time the software can be upgraded with a licence key to a full version.(2) The software runs with operating systems Microsoft Windows 7, Windows 8, Windows 10. (3) The software needs the > Microsoft .NET Framework 4.0. It has to be installed first if it is not already installed on your computer. The installation package can be downloaded from the Microsoft webpage.(4) This software supports the analyzers testo 556, testo 560 and testo 570(5) For your own security we recommend a backup of your data before running an update.