testo 635-2 - 温湿度仪

訂貨號  0563 6352

  • 可選配濕度、溫度、壓力露點以及絕對壓力探頭

  • 可同時連接2個探頭

  • 超大容量記憶體,可存儲10,000組資料

  • 帶USB資料線以及PC軟體,用於分析,管理和歸檔測量資料

testo 635-2温湿度计适用于测量各种材料,表面以及环境中的温度及湿度。尖端前沿的技术以及大范围可供选择的传感器及探头实现了这个可能性。

本款儀器需要連接探頭方能使用。

點擊此處進行篩選。

産品描述

testo 635-2温湿度计极其适用于空调系统的检测。多种可供选择的传感器和探头可帮助您测量以下各种参数:
  • 相对湿度
  • 材料含湿量
  • 材料补偿水分
  • 压缩空气系统的压力露点
  • U值
  • 空气温度
  • 表面温度
  • 中心温度
  • 绝对压力
仪器主机可同时连接2个探头。测量结果即时显示于清晰易读的显示屏上。
 

坚固、实用且便于使用

除了可测量多种参数以外,testo 635-2温湿度计还可显示最大/最小值、平均值以及计算室内空气以及墙面间的露点差。您可以通过这些数据来分析天花板和墙面的潮湿度。个性化配置的特性曲线,确保材料含湿量准确可靠的显示。 

仪器本身以及操作界面使用起来都简单及舒适。带背光灯的显示器确保您在照明不足的情况下依然能轻松读取数据,坚固的外壳有效的保护仪器受到外部撞击。


保存、传输并打印数据 – 易如反掌

仪器可创建测量地址,并将该测量地址所测得的数据统一储存于该地址文件下。可创建用户个性化测量程序或菜单来实施长期测量或材料含湿量测量。仪器内存可存储高达10,000个测量数据 – 单次测量或程序测量。通过标配的USB数据线可将您的温湿度计连接至电脑,PC软件帮助您简单舒适的进行数据分析、管理以及归档工作。

若您还想寻求更简便的方法:可供选配的testo红外打印机,可提供现场随时随地的数据打印。
 

 

産品包含

testo 635-2温湿度计,含专业分析软件和USB数据线,带电池和出厂报告。请注意:仪器至少应配置一个探头或传感器(标准主机配置中不包括)才能正常工作。
NTC

測量範圍

-40 ~ +150 °C

測量精度

±0.2 °C (-25 ~ +74.9 °C)

±0.4 °C (-40 ~ -25.1 °C)

±0.4 °C (+75 ~ +99.9 °C)

±0.5 %測量值 (其餘量程)

解析度

0.1 °C

Type K (NiCr-Ni)

測量範圍

-200 ~ +1370 °C

測量精度

±0.3 °C (-60 ~ +60 °C)

±(0.2 °C + 0.3 %測量值) (其餘量程)

解析度

0.1 °C

電容式濕度感測器

濕度測量範圍

0 ~ +100 %RH

測量精度

依探頭而定

解析度

0.1 %RH

絕壓

測量範圍

0 ~ 2000 hPa

測量精度

依探頭而定

解析度

0.1 hPa

技術參數

直徑

220 x 74 x 46 mm

操作溫度

-20 ~ +50 °C

外殼

ABS / TPE / 金屬

電池類型

堿錳電池

電池壽命

200小時

存放溫度

-30 ~ +70 °C

重量

428 g

刺入/浸入式探頭

Type K (NiCr-Ni)

測量範圍

-60 ~ +1000 °C

測量精度

1級精度 ¹⁾

相應時間

2 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-60 ~ +400 °C

測量精度

2級精度 ¹⁾

相應時間

7 s

1符合EN60584-2, 在 -40 ~ +1200 °C 內滿足2級精度

Type K (NiCr-Ni)

測量範圍

-60 ~ +800 °C

測量精度

1級精度 ¹⁾

相應時間

3 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-200 ~ +1000 °C

測量精度

1級精度 ¹⁾

相應時間

5 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

壓力露點探頭

電容式濕度感測器

濕度測量範圍

0 ~ +100 %RH

壓力露點

測量範圍

-20 ~ +50 °Ctpd

測量精度

±0.9 °Ctpd (+5.0 ~ +50.0 °Ctpd)

±1 °Ctpd (0 ~ +4.9 °Ctpd)

±2 °Ctpd (-5.0 ~ -0.1 °Ctpd)

±3 °Ctpd (-10.0 ~ -5.1 °Ctpd)

±4 °Ctpd (-20.0 ~ -10.1 °Ctpd)

相應時間

300 s

電容式濕度感測器

濕度測量範圍

0 ~ +100 %RH

壓力露點

測量範圍

-40 ~ +50 °Ctpd

測量精度

±0.8 °Ctpd (-4.9 ~ +50 °Ctpd)

±1 °Ctpd (-9.9 ~ -5 °Ctpd)

±2 °Ctpd (-19 ~ -10 °Ctpd)

±3 °Ctpd (-29.9 ~ -20 °Ctpd)

±4 °Ctpd (-40 ~ -30 °Ctpd)

相應時間

300 s

濕度探頭

NTC

測量範圍

0 ~ +40 °C

測量精度

±0.2 °C

電容式濕度感測器

濕度測量範圍

0 ~ +100 %RH

測量精度

±2 %RH (+2 ~ +98 %RH)

NTC

測量範圍

-20 ~ +125 °C

測量精度

±0.2 °C

電容式濕度感測器

濕度測量範圍

0 ~ +100 %RH

測量精度

±2 %RH (+2 ~ +98 %RH)

温湿度探头

訂貨號: 0636 9735

NTC

測量範圍

-20 ~ +70 °C

測量精度

±0.3 °C

電容式濕度感測器

濕度測量範圍

0 ~ +100 %RH

測量精度

±2 %RH (+2 ~ +98 %RH)

熱電偶

Type K (NiCr-Ni)

測量範圍

-50.0 ~ +400.0 °C

測量精度

2級精度 ¹⁾

相應時間

5 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-50 ~ +400 °C

測量精度

2級精度 ¹⁾

相應時間

5 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-50 ~ +250 °C

測量精度

2級精度 ¹⁾

相應時間

5 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

空氣探頭

Type K (NiCr-Ni)

測量範圍

-60 ~ +400 °C

測量精度

2級精度 ¹⁾

相應時間

200 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

絕對壓力探頭

絕壓

測量範圍

0 ~ +2000 hPa

測量精度

±5 hPa

解析度

0.1 hPa

超載

4000 hPa

表面探頭

Type K (NiCr-Ni)

測量範圍

-60 ~ +130 °C

測量精度

2級精度 ²⁾

相應時間

5 s

2) Accor ding to standard EN 60584-2, the accuracy of Class 1 refers t o -40 t o +1000 °C (Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K).

Type K (NiCr-Ni)

測量範圍

0 ~ +300 °C

測量精度

2級精度 *

相應時間

5 s

*Accor ding t o standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), CLass 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Tyoe K).

Type K (NiCr-Ni)

測量範圍

-60 ~ +300 °C

測量精度

2級精度 ¹⁾

相應時間

3 s

1符合EN60584-2, 在 -40 ~ +1200 °C 內滿足2級精度

Type K (NiCr-Ni)

測量範圍

-60 ~ +1000 °C

測量精度

1級精度 ¹⁾

相應時間

20 s

1) According to standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C (Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K).

Type K (NiCr-Ni)

測量範圍

-60 ~ +300 °C

hort-term ~ 500°C

測量精度

2級精度 ¹⁾

相應時間

3 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-60 ~ +400 °C

測量精度

2級精度 ¹⁾

相應時間

30 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-50 ~ +250 °C

測量精度

2級精度 ¹⁾

相應時間

3 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-50 ~ +100 °C , short-term up to +130 °C

測量精度

2級精度 ¹⁾

相應時間

5 s

1符合EN60584-2, 在 -40 ~ +1200 °C 內滿足2級精度

Type K (NiCr-Ni)

測量範圍

-50 ~ +170 °C

測量精度

2級精度 ¹⁾

相應時間

150 s

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-50 ~ +400 °C

測量精度

2級精度 ¹⁾

1) 符合EN 60584-2,在-40 ~ +1200 ℃範圍內滿足1級/2級精度。

Type K (NiCr-Ni)

測量範圍

-20 ~ +70 °C

測量精度

1級精度 ¹⁾

U-value: ±(0.1 °C + 0.2 %測量值)*

*when used with an NTC or wireless humidity probe for measuring outside temperature and 20 K difference between the air inside and outside

1符合EN60584-2, 在 -40 ~ +1200 °C 內滿足2級精度

Type K (NiCr-Ni)

測量範圍

-50 ~ +120 °C

測量精度

1級精度 ¹⁾

相應時間

90 s

1符合EN60584-2, 在 -40 ~ +1200 °C 內滿足2級精度

Localising mould

Damp ceilings and walls may be a result of structural damage. In most cases, however, it is a sign of improper ventilation. Once the mould appears inside a house, the tenant assumes that moisture has come in from outside. Numerous disputes have erupted because of the issue of who is liable for the mould damage. However, it is difficult to find out who or what has caused the mould: the tenant or faulty structural design?

Testo 635-2 is ideal for measuring moisture in ceilings and walls. Using the optional attachment temperature/moisture probe and optional surface temperature probe, the testo 635 automatically calculates the dew point distance. It provides initial information about whether mould is being caused by condensation, or from moisture ingress due to structural damage or faulty insulation.

The supplied PC software can be used to document and analyse the measurement data.

Measuring material moisture

Monitoring the moisture in construction materials and different timber is an important part of everyday work in the most diverse areas. For many users, measuring the material moisture as quickly and as non-destructively as possible is crucial.

Whether it is used to assess the screed drying process, further processing, or the combustibility of wood, our testo 635-2 hygrometer can be used to examine the moisture content in many different construction materials and types of wood.

Monitoring drying processes

Whether freshly laid screed, or monitored drying of moisture damage, timely determination of the required moisture level will save time and therefore money.

Screeds are laid in the in interior works stage, generally after plastering. The flooring and painting and decorating then follow. The drying behaviour is therefore a significant factor in the works schedule, primarily because the laying of flooring depends on this.

The moisture measurement establishes readiness for flooring; liability for the flooring is thus transferred to the respective trade installing the flooring. An important part of this work is therefore documentation and assurance in the testing for readiness for flooring.

What is the extent of moisture damage and what consequences can be expected in terms of time and costs? These questions have to be answered in order to decide which auxiliary tools and materials are to be used to speed up the drying process.

The t 635-2 and attachment scatter field probe can be used to measure the moisture in the construction material.

Using a thin moisture probe combined with the testo 635-2 the moisture of construction materials can be determined by means of an equilibrium moisture measurement. To do this, the probe has to be inserted in a borehole in the material being measured and sealed. The relevant material characteristic can be manually entered into the device or via software. After several hours, equilibrium with the material has taken place and the testo 635-2 displays the material moisture.

Monitoring production and storage conditions

Our temperature/humidity measuring instruments are used around the world in production, storage and server rooms, museums, archives, cold storage warehouses, containers and sales counters.

Manufacturers, carriers, or dealers of sensitive products must ensure that specified temperature or humidity values are observed during production and storage. The testo 635 offers the option of performing spot measurements in relevant places.

The temperature/humidity measuring instrument testo 635-2 offers the user a wide range of humidity/moisture probes. It provides the option of measuring humidity, material moisture and U-value (for the thermal assessment of structural components). In addition to the standard probes, up to three radio probes can be connected to the device in parallel. Measurement results can be analysed, stored and documented using the supplied PC software.

U-value measurement in old buildings

When redeveloping or renovating old buildings, it is crucial to be able to determine quickly if heat is being lost through the windows and walls. Only then can energy costs be reduced and redevelopment measures carried out efficiently.

When assessing thermal transmission, e.g. in old buildings in need of renovation, the U-value is one of the most important values. It enables thermal assessment and monitoring of the installed material.

3 temperature values are required for calculating the U-value:

  • Outside temperature
  • Surface temperature of the internal wall
  • Indoor air temperature

 

A radio probe is needed to determine the U-value; this is placed in position outside. It transmits the readings to the measuring instrument inside. To measure the surface temperature the three wires of the U-value probe are attached to the wall with plasticine. The air temperature is recorded by a sensor located on the probe plug. The measuring instrument testo 635-2 automatically calculates the U-value from the three values and shows this on the display. The advantage: there is no need for manual calculation; the result is quick and accurate.

Measuring wood moisture quickly and non-destructively

The testo 635-2 uses the optional attachment scatter field probe (item no.: 0636 6160) to quickly and non-destructively examine the material moisture in timber. Characteristic curves are available for measuring wood moisture in soft and hard woods, and chipboard. These characteristic curves were developed in cooperation with the LPI institute.

The measurement results are calculated up to a depth of 5 cm and can be recorded at the touch of a button. The readings are displayed in percent by weight in comparison to the dry mass of the material.

Measurement data can be stored and documented using PC software.

産品彩頁

操作說明書

軟件