The flue gas probe from Testo can be used to carry out efficient and reliable flue gas measurements on stationary industrial engines. It can be used at flue gas temperatures of up to 1,000 &deg;C.

The flue gas probe from Testo makes it possible to carry out efficient flue gas measurements on industrial engines. In the case of diesel engines, the permanently welded-on preliminary filter provides protection from diesel particulates. It can be used at flue gas temperatures of up to 1,000 &deg;C.

Ideal for official emission measurement (compliance testing): the heated industrial probe kit comprises a heated probe shaft up to 600°C flue gas temperature, a heated gas sampling hose (length 4 m) and a thermocouple type K – this means you are ideally equipped.

Ideal for the extractive sampling of flue gas at high flue gas temperatures. The industrial probe kit 1200°C comprises a handle, a probe shaft up to 1200°C flue gas temperature, a 4 m long gas sampling hose, including inline filter (all three unheated) and a thermocouple type K.

Ideal for the extractive sampling of flue gas at high flue gas temperatures, e.g. in glass and steel production. The industrial probe kit 1800°C comprises a handle, a probe shaft up to 1800°C flue gas temperature and a 4 m long gas sampling hose, including inline filter (all three unheated).

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 335 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 700 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The kit with SO2 low sensor and heated gas sampling system was developed for the precise measurement of very low SO2 values following flue gas after-treatments (e.g. scrubbers). SO2 measurement enables you to ensure the legally compliant operation of coal-fired power plants, waste incineration plants and large engines. Particularly convenient: the efficiency of the reduction of SO2 concentrations is calculated directly in the testo 350 flue gas analyzer (please order separately).

<h4>testo 300 Intermediate Kit - Flue gas analyzer (O2, CO up to 4,000 ppm) </h4>With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO sensor up to 4,000 ppm, testo Bluetooth® Connector, basic flue gas probe, instrument case and practical accessories.

The spare dirt filter enables you to reliably protect the condensate trap in the gas sampling hose and measuring range extension (gas dilution) against dirt. (Color may vary depending on batch.)

General technical data	Weight 16 g
	Dimensions length: 26 mm, ø (rear): 15 , ø (front): 17 mm
	Product-/housing material Plastic

Spare dirt filters (10 off) - for condensate trap in the gas sampling hose and measuring range extension

Spare dirt filters (10 off) - for condensate trap in the gas sampling hose and measuring range extension

General technical data

General technical data