Fine particle measuring system
For on-site measurement of fine particles especially for flue gas, flue draught and pressure on gas and oil systems
Particulate matter measurement instruments for heating engineers and servicing fire places
Our particulate matter measurement instruments mean you have a practical aid to hand.
You benefit from having a pre-programmed measuring process which always proceeds in the same way for the individual measurements.
That saves a lot of time.
Fine dust measuring device for industrial use
There are a variety of professions which make it necessary to comply with legal regulations relating to particulate matter. Those servicing fire places and chimneys also have limit values to adhere to for the safety of both the user as well as the technician. However, heating engineers also come into contact with particulate matter and are required to be able to work with different measurements in this area. In these cases, it makes sense to use a particulate matter measurement instrument.
The practical instruments which undertake digital measurements and carry them out in real time enable you to respond quickly if the values are too high. The instruments in Testo's range are approved for the various fuel classes. You therefore not only ensure the protection of people in the direct vicinity of the systems, but also enable more effective environmental protection.
fields of application in relation to the limit value levels
usability for oil and solid fuel systems
mobile use possible
Particulate matter measurement – this is where it will be needed
The investment in a particulate matter measurement instrument of course needs to be well thought out. However, if your tasks include setting combustion plants, or possibly even being required to carry out acceptance test measurements, there is no way around it. Basically, here you have values which have to be adhered to. On-site particulate matter measurements are therefore part of your day-to-day work and serve to protect both the environment and people.
It is important for you to be able to rely on very sophisticated sensor technology. This helps you to get a better overview and to obtain very accurate values. Testo's instruments are specifically designed in this way and offer sophisticated technology, which works very reliably and provides accurate measuring values. Depending on the instruments, the measuring values can even be read out directly on the display. In other words, you already have an analysis on site and can inform the customer of the results.
If you rely on the possibility of the particulate matter measuring device being combined with flue gas analyzers, attention should preferably be paid to compatibility when making a selection.
extension of a classic flue gas analyser
sophisticated measurement of values on site
graphic analysis of the values for better assessment
An overview of further instruments for flue gas measurement:
Highlight
Flue gas analyser
Efficient, wireless parallel measurement of up to four testo Smart Probes simultaneously
Highlight
Industrial emission measurements
Increased measurement range for unlimited measurements even when gas concentrations are higher
Best seller
Gas leak detector
Flexible measurement probe for inaccesible pipes
Audible & Visual alarm if limit value is exceeded
Best seller
Smoke tester
Determination of soot concentration (mg/m3) as well as Filter Smoke Number (FSN) or Bosch number
Particulate matter monitoring – the different versions of the instrument
Particulate matter monitoring is of course an important factor in terms of health and environmental protection. However, the general checking of flue gas values in specific areas must not be underestimated either. The combination of several instruments may prove to be very convenient here. Technology has now progressed so far that you have the possibility of combining different instruments and then comparing the values with one another. Thus, for example with oil heating systems in particular, it makes sense to use a smoke tester too.
No matter whether you are a heating engineer or you are servicing fire places and chimneys, you need no further instructions as far as the instruments are concerned when it comes to particulate matter measurement. You can obtain very accurate and reliable data with the instrument. The design of Testo's products means they can be used for all fuel classes. In this respect, the A, B and C fuel classes are covered. In addition, there are limit values which have to be complied with and that can be displayed by a flue gas analyser. Levels 1 and 2 can also be detected using the instruments.
If you establish that the particulate matter exposure is too high, depending on the instrument, you can also use a leak detector. The leak detector in detail:
fast system checking
detection of leaks within a short period of time
reliable data on the sizes of the particulate matter being emitted
You are aware of how important the use of particulate matter measurement is and you are also legally required to carry out a check. This means it is important for you to be able to rely on your instrument.
At Testo, we have therefore put together a range of exclusively high quality and high tech models for you to use. Our detailed descriptions tell you all about the features and the application of the instruments.
Over recent years, it has become more and more evident that nanoparticles and particulate matter have an impact on the environment and health. Whereas nanoparticles constitute an umbrella term, particulate matter specifically refers to emissions from special systems. It may therefore make sense not just to use a classic nanoparticles measuring instrument here, but to rely on a sophisticated particulate matter measuring device. No matter whether you are carrying out particulate matter measurement as a chimney sweep or a heating engineer – the handy, digital instruments are a practical aid.
