Our flexible flue gas probe helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).

Modular flue gas probe, probe length 300 mm, diameter 6 mm, with cone. The testoFix probe holder is available for this probe as an optional accessory. Use this to attach the flue gas probe to the flue gas pipe quickly and securely. The probe hose is shorter (650 mm) and more flexible than before, to make your work easier.

Modular flue gas probe with a probe length of 300 mm and a diameter of 8 mm, with a cone for attaching it in the measurement aperture. However, the flue gas probe can also be securely and reliably attached to the flue gas pipe using the optional testoFix probe holder. The hose between probe and measuring instrument is shorter and more flexible than before, which makes set-up and dismantling significantly easier.

Modular flue gas probe, probe length 180 mm, diameter 6 mm, with a cone for attaching it in the measurement aperture. However, you can also attach this flue gas probe to the flue gas pipe securely and reliably using the testoFix probe holder. New: short, flexible hose for easier handling.<br /><br />&nbsp;

Modular flue gas probe with a probe length of 180 mm and a diameter of 8 mm, including cone and short, flexible hose for straightforward set-up and dismantling. This flue gas probe can also be attached to the flue gas pipe using the optional testoFix probe holder.

Modular flue gas probe with 300 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

T&Uuml;V-tested modular flue gas probe with 300 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 335 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

The modular flue gas probe with preliminary filter &Oslash; 14 mm, 700 mm long probe shaft, thermocouple up to 1000 &deg;C and quick-change click system (for quick probe shaft replacement).

T&Uuml;V-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

Modular flue gas probe with 180 mm long probe shaft, including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 1000 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 335 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

The modular flue gas probe with 700 mm long probe shaft including integrated thermocouple up to 500 &deg;C and quick-change click system (for quick replacement of the probe shaft).

Temperature measurements at radiators; flue gas parameter and pressure measurements at burners; CO measurements in the ambient air: the testo 320 allows you to carry out all measurements in and around heating systems with only one measuring device.

Flue gas analysis with no stress, paper or shaky probes &ndash; the new testo 330i flue gas analyzer makes this possible. This instrument combines the proven measuring technology of its predecessor testo 330 LL with a revolutionary new method of operation.

Proven technology meets revolutionary operation. The testo 330i flue gas analyzer was specifically developed to help you to overcome all the obstacles you meet when servicing and commissioning heating systems.&nbsp;&nbsp;

The testo 330i flue gas analyzer advanced set will enable you to overcome all the challenges that crop up when commissioning and servicing heating systems. The testo 330i advanced set contains the flue gas analyzer, a flue gas probe and a temperature probe, along with practical accessories.

Everything you need to carry out efficient servicing and commissioning of heating systems using the testo 330i flue gas analyzer &ndash; in one compact set.

Emission checks in industry are easy with the flue gas analyzer testo 340. Professional technology meets practical design. The testo 340 flue gas analyzer is easy-to-use for emission measurement in industries. It can be fitted with up to four different gas sensors.

The testo 350 is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration. The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional. This allows you to select freely from sensors for CO, NO, NO2, SO2, H2S, CxHy and CO2.

<strong>The Control Unit complements the testo 350 Analysis Box (separate product) for emission measurements</strong>. Testo 350 Control Unit is a rugged, easy-to-use exhaust gas analyzer designed to meet the highest demands when it comes to carrying out precise industrial emission measurements and providing proper data administration.

General technical data	Weight 12 g
	Dimensions height: 2.9 mm, ø: 29.7 mm
	Product colour white

Spare particle filter, 10 off

Spare particle filter, 10 off

General technical data

General technical data