1. Home
    2. Set with flue gas analyzer testo 320 (with H2-compensated C...

    Set with flue gas analyzer testo 320 (with H2-compensated C...

    0563 3220 77
  1. Set with flue gas analyzer testo 320 (with H2-compensated CO measurement cell and Bluetooth), modular 300 mm flue gas probe, combustion air probe and mains unit

    General technical data

    Weight
    573 g
    Dimensions
    240 x 85 x 65 mm
    Operating temperature
    -5 to +45 °C
    Display size
    240 x 320 pixels
    Display function
    Colour graphic display
    Power supply
    Battery: 3.7 V / 2,400 mAh; Mains unit: 6 V / 1.2 A
    Maximum memory
    500 Measurement values
    Storage temperature
    -20 to +50 °C

    Differential Pressure - Piezoresistive

    Measuring range
    ±10000 Pa
    Accuracy
    ±3 % of mv (10 to 10000 Pa) plus ±1 Digit
    ±0.3 Pa (0 to 9.99 Pa) plus ±1 Digit

    Flue gas O₂

    Measuring range
    0 to 21 Vol.%
    Accuracy
    ±0.2 Vol.%
    Resolution
    0.1 Vol.%
    Reaction time t₉₀
    < 20 s

    Accessories for probes

    Combustion air / temperature

    Probes

    Temperature probes

  2. Temperature probes
    Connection cable
    Connection cable
      :
      0430 0143
      SAR 290
    • Temperature probes
      Mini ambient air probe
      Mini ambient air probe for flue gas analyzers – measuring range: 0 to +80 °C
        :
        0600 3692
        SAR 282
      • Accessories for measuring instrument

      • Accessories for measuring instrument
        testo 320-330 case
        Instrument case (height: 130 mm) - for instrument, probes and accessories
          :
          0516 3300
          SAR 421
        • Accessories for measuring instrument
          Spare particle filter, compact probe; 10 off
            :
            0554 0040
            SAR 141
          • Accessories for measuring instrument
            Smoke tester with oil and soot sheet, for measuring soot in flue gas, excl. cone (part no. 0554 9010)
              :
              0554 0307
              SAR 597
            • Accessories for measuring instrument
              testo-Schnelldrucker IRDA mit kabelloser Infrarot-Schnittstelle
              testo fast printer IRDA
                :
                0554 0549
                SAR 1 227
              • Accessories for measuring instrument
                Spare thermal paper
                Spare thermal paper for printer, permanent
                  :
                  0554 0568
                  SAR 136
                • Accessories for measuring instrument
                  USB mains unit incl. cable
                    :
                    0554 1105
                    SAR 209
                  • Accessories for measuring instrument
                    PC Software testo EasyHeat
                    Free download: testo EasyHeat PC software
                      :
                      0554 3332
                    • Accessories for measuring instrument
                      Spare particle filter
                      Spare dirt filters - for probe handle (10 off)
                        :
                        0554 3385
                        SAR 119
                        • If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.
                          A description and all necessary files can be found under the search term: Update-Kit / Bootloader
                        • Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.
                        • The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
                        • testo 320 Bootloader(v1.18, 384.0 kB)
                        • Update-Kit / Bootloader(V1.22, 1.24 MB)
                          (testo 330 LL | testo 330i | testo 350 Control Unit + Analysis Box | testo 320)
                          If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.