CxHy replacement sensor

0393 0300

CxHy replacement sensor

0393 0300

For the measurement of hydrocarbons (CH4 optimized)

Simply change sensor yourself on site

Pre-calibrated (adjusted to CH4 ex-works)

CxHy replacement sensor for flue gas measurement. A particularly practical feature: You can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyzer.
The sensor is calibrated to methane ex-works. It can be calibrated to another gas by the user.

1 x CxHy replacement sensor.

Please note:

For one-off activation of the measurement parameter in the flue gas analyzer, you need the CxHy retrofit sensor. If the retrofit sensor has to be replaced, use the CxHy replacement sensor.

An O₂ content in the flue gas of a least 2% is needed for measurement with the sensor.

testo 350 - Analysis Box for exhaust gas analysis systems

:
0632 3510

Methane (CH₄)

Measuring range	100 to 40000 ppm
Resolution	10 ppm

Propane (C₃H₈)

Measuring range	100 to 21000 ppm
Resolution	10 ppm

Butane (C₄H₁₀)

Measuring range	100 to 18000 ppm
Resolution	10 ppm