Testo official store
Free delivery
Secure payment
Testo official store
- Home
- CxHy replacement sensor
0393 0300
CxHy replacement sensor
0393 0300
CxHy replacement sensor
CxHy replacement sensor for flue gas measurement. A particularly practical feature: You can replace the sensor yourself – the precalibrated sensor is simply plugged into the appropriate flue gas analyser.
The sensor is calibrated to methane ex-works. It can be calibrated to another gas by the user.
The sensor is calibrated to methane ex-works. It can be calibrated to another gas by the user.
- For the measurement of hydrocarbons (CH4 optimised)
- Compatible with testo 350 ONLY
- Simply change sensor yourself on site
- Pre-calibrated (adjusted to CH4 ex-works)
Methane (CH₄)
Methane (CH₄) | Measuring range 100 to 40000 ppm |
|---|---|
Resolution 10 ppm | |
Propane (C₃H₈)
Propane (C₃H₈) | Measuring range 100 to 21000 ppm |
|---|---|
Resolution 10 ppm | |
Butane (C₄H₁₀)
Butane (C₄H₁₀) | Measuring range 100 to 18000 ppm |
|---|---|
Resolution 10 ppm | |
1 x CxHy replacement sensor.
Please note:
For one-off activation of the measurement parameter in the flue gas analyser, you need the CxHy retrofit sensor. If the retrofit sensor has to be replaced, use the CxHy replacement sensor.
An O2 content in the flue gas of a least 2% is needed for measurement with the sensor.
Please note:
For one-off activation of the measurement parameter in the flue gas analyser, you need the CxHy retrofit sensor. If the retrofit sensor has to be replaced, use the CxHy replacement sensor.
An O2 content in the flue gas of a least 2% is needed for measurement with the sensor.
