testo 380 - Particulate matter measurement system

Bestelnr.  0632 3801

  • The system comprises testo 380 particulate matter measuring instrument and testo 330-2 LL flue gas analyzer

  • Complete solution for solid fuel, oil and gas systems 

  • Fully TÜV-tested for limit value levels 1/2 and according to VDI 4206 Sheet 2

  • Particulate matter measurement, simultaneous O2 and CO measurement

With the testo 380 particulate matter measurement system, you can carry out uncomplicated particulate matter measurements directly on site. The completely new method of measurement developed by Testo enables the particulate matter to be monitored and limit values to be enforced. The measurement system is your professional tool for solid fuel, oil and gas systems.

Prijs op aanvraag

Productbeschrijving

The constantly rising number of solid fuel systems is leading to a further increase in the emission of particulate matter. The revised version of the 1st German Federal Immission Control Ordinance (BImSchV) presents new challenges for flue gas inspectors, heating engineers and service engineers when it comes to particulate matter measurement.

testo 380 particulate matter measurement system – complete solution for solid fuel, oil and gas systems

The testo 380 particulate matter measurement system comprises two system components: the testo 380 particulate matter measuring instrument including particulate matter probe and the testo 330-2 LL as a control centre and flue gas analyzer. This complete system is extremely compact, easy to use and ensures accurate measurements on solid fuel, oil and gas systems.

Advantages of the testo 380 particulate matter measurement system for particulate matter measurement

  • Suitability permit received for fuels 1-8, levels 1 and 2
  • Measurement system comprising testo 380 particulate matter measuring instrument and testo 330 LL flue gas analyzer
  • The testo 380 particulate matter measuring instrument allows you to carry out effortless and straightforward measurements directly on site
  • testo 330 LL flue gas analyzer: System control centre and flue gas analyzer
  • Parallel measurement of particle matter, O2 and CO in real time
  • Charts used to show all required measuring values for an optimum overview
  • Particularly cost-effective operation and maintenance
  • Effortless handling and easy transportation
  • Fully TÜV-tested for limit value levels 1 and 2 and according to VDI 4206 Sheet 2
  • High-tech in a portable case: measurement of all relevant values with just one probe

 

Leveringsomvang

testo 380 particulate matter measurement system incl. testo 380 particulate matter measuring instrument with particulate matter probe and cleaning set, testo 330-2 LL flue gas analyzer with mains unit (incl. Bluetooth, H2-compensated CO cell), modular flue gas probe (length 300 mm, Ø 8 mm), combustion air temperature probe (length 190 mm).

 
Algemene technische gegevens

Meetbereik

0 … 300 mg/m³

Nauwkeurigheid

acc. VDI 4206-2

Resolutie

0,1 mg/m³ (>5mg/m³)

Afmetingen

475 x 360 x 190 mm

Operating temperature

+5 … +40 °C

behuizing

ABS

beschermklasse

IP40

display type

LCD

display functies

shows warm-up phase and operational readiness

batterij

via internal mains unit: 100 V AC/0.45 A to 240 V AC/0.2 A (50 to 60 Hz)

maximum

500.000 readings

Opslagtemperatuur

-20 … +50 °C

Gewicht

7900 g

Accessoires

USB connectie kabel, instrument-PC

Artikelnummer 0449 0047

€ 18,00
€ 21,78 inclusief btw, Bebat en Recupel
€ 200,00
€ 242,00 inclusief btw, Bebat en Recupel
€ 26,00
€ 31,46 inclusief btw, Bebat en Recupel
€ 99,00
€ 119,79 inclusief btw, Bebat en Recupel
Reserve-filters, 20 stuks

Artikelnummer 0554 3381

€ 47,00
€ 56,87 inclusief btw, Bebat en Recupel
€ 149,00
€ 180,29 inclusief btw, Bebat en Recupel
€ 95,00
€ 114,95 inclusief btw, Bebat en Recupel
€ 153,00
€ 185,13 inclusief btw, Bebat en Recupel

Testo 380 is de ideale analyser voor fijnstofmetingen.

De testo 380, de fijnstofmeter, begeleidt u bij de meting, analyseert de relevante parameters, meet teglijkertijd O2 en CO en geeft deze waarden weer in een diagram. De testo 380 is de ideale partner bij een fijnstofmeting.

Met de testo 380 kunnen de metingen om te voldoen aan de wettelijke richtlijnen en voorschriften uitgevoerd worden. Dankzij het intuïtieve menu kunnen geen stappen in het meetproces vergeten worden. De trekmeting is bv. reeds geïntegreerd in het meetproces.

Het is belangrijk om verwarmingsinstallaties die werken op vaste brandstoffen af te regelen zodat ze efficiënt werken en voldoen aan de wettelijke grenswaarden. Het meetprogramma “ setting assistant” is een uitstekend hulpmiddel: het begeleidt je door alle meetprocedures. De testo 380 kan zelfs meerdere meetcycli op rij uitvoeren zonder enige moeite.

Productbrochures

Gebruiksaanwijzingen

Software