Parametr

624 Products or Recomendations for Parametr
  • testo 6321 - pressure transmitter for differential pressure

    Obj.č 0555 6321

    Measuring and control technology also ensures efficiency in air conditioning and ventilation technology: the testo 6321 high-precision pressure transmitter for measuring differential pressure has long-term stability and helps you to monitor and control processes in air conditioning, ventilation and cleanroom technology in a reliable and efficient way.

    • Pressure transmitter for measuring differential pressure in the 100 Pa to 2 bar measuring range

    • Magnetic valve for automatic zero-point adjustment guarantees high temperature independent accuracy and long-term stability

    • Alignment and analysis save time and costs for commissioning and maintenance

    • Available with and without display

  • testo 6351 - differential pressure transmitter for industry

    Obj.č 0555 6351

    The testo 6351 pressure transmitter for differential pressure is suitable for industrial applications. It can record even the lowest pressures with a high level of accuracy. The pressure transmitter was specially designed for monitoring differential pressure in the 50 Pa to 2,000 hPa measuring range.

    • Automatic zero-point adjustment guarantees high temperature-independent accuracy and long-term stability

    • Low measuring range down to 50 Pa ensures very high precision at the lowest pressures

    • Measurement of differential pressure, flow velocity and volume flow

    • Configurable alarm management with adjustable response delay and alarm acknowledgement
       

  • testo 6741 - Dew point transmitter

    Obj.č 0555 6741

    Wherever compressed air, air or gases are used in industry, excessively high humidity can cause damage or impair product quality. You can use the testo 6741 dew point transmitter to keep trace humidity in your systems in check (e.g. in membrane and adsorption dryers). Prevent damage and reduce costs through the targeted use of measuring and control technology.

    • Dew point transmitter with a measuring range of -45 °Ctd to + 30 °Ctd and G½ thread

    • Testo polymer humidity sensor with a high degree of accuracy and long-term stability

    • Freely scalable analog output (4 to 20 mA) and optional alarm plug with 2 integrated switching outputs

  • testo 6920 - temperature transmitter

    Obj.č 0555 6920

    The testo 6920 temperature transmitter offers a high level of accuracy of up to ±0.5 °C. It can be used anywhere where temperature plays a role: in industrial buildings, office buildings, museums, schools and other buildings.

    • 2 types of housing for use as a wall and/or duct version

    • Optional set-point adjuster

    • Attractive, functional design

    • Available with and without display

  • testo 6744 - Dew point transmitter 

    Obj.č 0555 6744

    Wherever compressed air, air or gases are used in industry, excessively high humidity can cause damage or impair product quality. You can use the testo 6744 dew point transmitter to keep trace humidity in your systems in check (e.g. in membrane and adsorption dryers). Prevent damage and reduce costs through the targeted use of measuring and control technology.

    • Dew point transmitter with a measuring range of -45 °Ctd to + 30 °Ctd, NTP½ thread and display

    • Testo polymer humidity sensor with a high degree of accuracy and long-term stability

    • Freely scalable analog output (4 to 20 mA) and optional alarm plug with 2 integrated switching outputs

  • testo 103 - vpichovací teplomer

    Obj.č 0560 0103

    Vpichovací teplomer testo 103 je najmenší vyklápací teplomer vo svojej triede - a preto je perfektný pre náhodné kontroly a oblasti potravinárstva.

    • Optimálny pre potraviny: v zhode s HACCP, certifikovaný podľa EN 13485

    • Odolný proti striekajúcej vode, trieda krytia IP55

    • Praktický vyklápací kĺb – rýchlo zmeria, rýchlo sa schová, hodí sa do každého vrecka na  košeli alebo na nohaviciach

    • Jednoduché, presné meranie teploty

  • testo 6743 - Dew point transmitter 

    Obj.č 0555 6743

    Wherever compressed air, air or gases are used in industry, excessively high humidity can cause damage or impair product quality. You can use the testo 6743 dew point transmitter to keep trace humidity in your systems in check (e.g. in membrane and adsorption dryers). Prevent damage and reduce costs through the targeted use of measuring and control technology.

    • Dew point transmitter with a measuring range of -45 °Ctd to + 30 °Ctd, G½ thread and display

    • Testo polymer humidity sensor with a high degree of accuracy and long-term stability

    • Freely scalable analog output (4 to 20 mA) and optional alarm plug with 2 integrated switching outputs

  • testo 460 - otáčkomer

    Obj.č 0560 0460

    Bezdotykové merania otáčok s praktickým otáčkomerom testo 460 a samolepiacimi reflexnými značkami - LED označenie miesta merania sa od reflexných značiek odrazí späť do prístroja a tým sa zmerajú otáčky.

    • Optické meranie otáčok

    • Značenie miesta merania LED diodou

    • Dobre čitateľné namerané hodnoty vďaka podsvietenému displeju aj pri zlých svetelných podmienkach

    • Vrátane príslušenstva reflexných značiek, ochrannej krytky a tašky na opasok

  • testo 6621 - Temperature and humidity transmitter

    Obj.č 0555 6621

    Measuring and control technology helps you to reduce your energy costs. For instance, the testo 6621 temperature and humidity transmitter can be put to good use in automated building services where it meets increasing demands in terms of the accuracy, reliability and safety of climate measurements. Accurate measurement supports you in keeping your expenditure on energy cost-efficient.

    • Transmitter with 2 analog outputs (temperature/humidity)

    • High-precision Testo humidity sensor with long-term stability

    • Adjustment without disassembling the transmitter

    • P2A software for parameterization, adjustment and analysis

  • testo 882 - termokamera

    Obj.č 0560 0882

    Termokamera testo 882 má v pištoľovom dizajne najvyššie rozlíšenie infračerveného detektora. Používa sa predovšetkým v priemyselnej údržbe a stavebníctve. Obsahuje motorové ostrenie a preto je jednoduchá obsluha jednou rukou. K dispozícii je tiež možnosť dovybavenia filtrom na vysoké teploty, alebo rádiovou vlhkostnou teplotnou sondou.

    • Jednoduchá obsluha jednou rukou pre rýchlu, jednoduchú termografiu

    • Rozlíšenie detektora termokamery 320 x 240 pixelov, s možnosťou funkcie SuperResolution rozširujúce rozlíšenie termogramov na 640 x 480 pixelov

    • Teplotná citlivosť NETD <50 mK

    • Teplotný rozsah -20 až + 350 °C (popr. 550 °C)

  • testo 6631 - temperature/humidity transmitter

    Obj.č 0555 6631

    The testo 6631 temperature and humidity transmitter is ideally suited for use in greenhouses and laboratories. Use the transmitter for the reliable monitoring of critical climates in bio research.

    • Transmitter with precise Testo humidity sensor that has long-term stability (±2.5 % RH)

    • 2 analog outputs (humidity/temperature)

    • Integrated ventilator enables flow impact onto the sensor for recording an averaged climate in the greenhouse cell

    • Protection of electronics and sensor from humidity influences (such as sprinkler irrigation)

  • testo 405 - Thermal anemometer

    Obj.č 0560 4053

    testo 405; termo-anemometer s držiakom do potrubia, vrátane pripevňovacieho klipsu, batérie

    • Výpočet objemového prietoku do 99 990 m3/hod.

    • Ľahké odčítanie nameraných hodnôt vďaka flexibilnému kĺbu

    • Výsuvný teleskop až 300 mm

    • Ideálne vhodný pre meranie v potrubí

  • testo 410-1 - Vrtuľkový anemometer vo vreckovom formáte

    Obj.č 0560 4101

    testo 410-1; vrtuľkový anemometer s integrovanou NTC sondou pre meranie teploty vzduchu; vrátane ochrannej krytky, batérií a kalibračného protokolu

    • časové priemerovanie

    • Funkcia Hold a Max.-/Min. hodnoty

    • Windchill ® pre výpočet vnímanej teploty

    • Podsvietený displej

  • testo 416 - vrtuľkový  anemometer

    Obj.č 0560 4160

    Vrtuľkový  anemometer s teleskopickou sondou - optimálny pre meranie prúdenia vo vzduchotechnickom kanále.

    • Pevne pripojená, výsuvná teleskopická sonda - maximálna dĺžka 890 mm, priemer 16 mm

    • Meranie prúdenia, vytvorenie časovej a bodovej priemernej hodnoty pre výpočet objemového prietoku

    • Funkcia Hold, zobrazenie hodnôt min. / max. funkcia Auto-Off

    • Dodávka vrátane kalibračného protokolu a batérie

  • testo 6651 - temperature/humidity transmitter for critical climate applications

    Obj.č 0555 6651

    In combination with the testo 660x probe series, the testo 6651 temperature and humidity transmitter meets high demands in air conditioning technology. Testo's temperature/humidity transmitter is even impressive where the climate is critical. This is because it enables a high level of measuring accuracy and the measurement of higher temperatures (up to +120 °C).

    • High-precision Testo humidity sensors with long-term stability (±1.7 % RH) can be ordered for the transmitter

    • Ethernet, relay and analog outputs enable optimum integration into individual automation systems

    • High-quality digital probes (can be ordered) and an intelligent calibration concept

    • Self-monitoring and an early warning function ensure high system availability

  • testo 6383 - differential pressure transmitter for cleanrooms

    Obj.č 0555 6383

    With the testo 6383, you get a differential pressure transmitter in a cleanroom-compliant panel design. In addition to differential pressure, the transmitter also offers humidity and temperature recording (with an optional probe).

    • Flat housing enables flush surface integration in the cleanroom wall

    • Low measuring range from 10 Pa ensures very high precision at the lowest pressures

    • Pressure transmitter for measuring differential pressure, as an option: humidity and temperature

    • Automatic zero-point adjustment guarantees high temperature-independent accuracy and long-term stability

  • testo 6681 - Temperature/humidity transmitter for critical applications

    Obj.č 0555 6681

    The testo 6681 temperature and humidity transmitter is designed for monitoring critical climate in industrial processes (e.g. production/process engineering). If these involve maximum precision or specialized applications (high humidity, trace humidity, etc.), then this climate transmitter is the ideal choice because, when it comes to humidity measurement, it features unrivalled cutting-edge technology.

    • High-precision Testo humidity sensor with long-term stability for high humidity applications (optional)

    • Ethernet, relay and analog outputs enable optimum integration into individual automation systems

    • High-quality digital probes and an intelligent calibration concept

    • Self-monitoring and an early warning function ensure high system availability

  • Mini teplomer

    Obj.č 0560 1109

    Povrchový mini teplomer vrátane batérie

    • Perfect for checking surface temperatures

    • Extra wide measuring tip for placing on a flat measuring point

    • Measurement of high temperatures up to +300 °C

    • Many areas of application: heating engineering, sanitation sector, and air conditioning/ventilation/refrigeration technology

  • testo 112 - Certifikovateľný 1-kanálový teplomer NTC/Pt100,

    Obj.č 0560 1128

    testo 112, 1-kanálový teplomer NTC/Pt100, kalibrovateľný, vrátane batérie

    • High-precision, calibratable temperature measuring instrument with PTB type approval – approved for official measurements

    • An attachable temperature probe can be connected – NTC and Pt100 probes optionally available to meet numerous practical requirements

    • Thanks to the water and dirt-repellent protective case TopSafe (optional), it is ideal for use in the food sector

    • Useful functions: minimum/maximum value memory and acoustic alarm

  • testo 545 - luxmeter

    Obj.č 0560 0545

    S luxmeterom testo 545 zmeriate intenzitu osvetlenia na pracoviskách rýchlo a spoľahlivo. V prípade potreby uložíte výsledky pre každé meracie miesto.

    • Meria intenzitu osvetlenia presne v jednotkách lux

    • Veľká kapacita pamäti pre až 3 000 namerených hodnôt

    • Možnosť vytvorenia bodových alebo časových priemerov

    • Správa meracích miest s voliteľným softwarom: na výber až 99 meracich miest

624 Products found
Show more