testo 174 T set -

Mini data logger for temperature in a set

Order-Nr.  0572 0561

  • Measurement data memory for 16 000 temperature readings, approx. 500 days of battery life

  • Waterproof according to IP 65, HACCP-compliant and certified according to EN 12830

  • Data analysis: three different software versions available, basic software free to download

  • Advantage of the set: comes with USB interface for data transfer to the PC

The testo 174T mini data logger for temperature is your practical support for continuous temperature measurement (e.g. the storage temperature of drugs or food). When buying these sets, you also get a USB interface for data transfer to the PC.

€ 109,00
€ 132,98 z DDV-om

Product Description

Attention: Please download the newest software version before using the USB interface for the first time. The software can be found in the download area.

 

Delivery Scope

Testo 174T mini data logger set for temperature, including USB interface for programming and reading the mini data logger, wall bracket, batteries (2 x CR 2032 lithium) and calibration protocol.

Temperature - NTC

Measuring range

-30 to +70 °C

Accuracy

±0,5 °C (-30 to +70 °C)

Resolution

0,1 °C

General technical data

Dimensions

60 x 38 x 18,5 mm

Operating temperature

-30 to +70 °C

Protection class

IP65

Channels

1 internal

Standards

EN 12830

Battery type

2 lithium batteries (CR2032)

Battery life

500 days (15 min measuring cycle, +25 °C)

Memory

16.000 measuring values

Storage temperature

-40 to +70 °C

Accessories

ComSoft Professional

Order Number: 0554 1704

€ 309,00
€ 376,98 z DDV-om
ComSoft CFR 21 Part 11

Order Number: 0554 1705

€ 1.390,00
€ 1.695,80 z DDV-om

Monitoring and documentation of the temperature in cold rooms

Many foods and drugs have to be stored within a specific cold temperature range. This can be done in individual cooled store rooms, but also in specialised cold stores or cold warehouses with high-rack facilities. The temperature must be continuously documented in all these cold storage facilities, because strict rules apply to quality management in both the food and drugs industries.

Data loggers are usually installed at the so-called critical control points (CCPs) of the cold room, in order to identify any possible temperature deviations and to introduce appropriate countermeasures. Critical points are for instance doors or passages through to other temperature areas within a warehouse.

Temperature monitoring in deep-freeze rooms for foods

There are a huge number of facilities where (deep-)frozen food has to be stored. These range from individual deep-freeze rooms on small food producers' sites (e.g. butchers), at restaurants and supermarkets, via deep-freeze rooms in the food industry, through to specialised cold stores / deep-freeze warehouses with high-rack facilities. The temperature must be continuously documented in all these facilities. In Europe, only temperature loggers may be used in this process which are approved according to EN 12830.

Typically, data loggers are used to measure the air temperature in storage facilities of this kind. The measuring instrument is installed in the deep-freeze room – as far as possible at critical points such as doors or cooling plants – and records the temperature data at defined intervals (typically: 15 minutes).
The recorded data can then be analysed and archived using special software.

Monitoring and documentation of transport temperature

For all goods which react sensitively to temperature fluctuations or have to be stored within a predefined temperature range, uninterrupted measurement data recording and documentation play a major role.
Incorrect temperature conditions during transport can lead to major losses of quality, including the total loss of value of the products that require monitoring.
Using a data logger, shipments can be checked for compliance with the specified temperature ranges and the data can then be read, analysed and archived by means of special software.