testo 417 套装 1 - 风量罩套装

訂貨號  0563 4171

  • 通过风量罩测量来确定体积流量

  • 测量温度、风速和风量

  • 套裝中包含的重要配件: testovent 417 风量罩 圆形风口(200×200 mm), testovent 417 风量罩 方形风口(330×330 mm)

  • 流速测量

  • 多种不同的插拔式风量罩可供使用

  • 流向识别

testo 417风速仪,带直径100mm的叶轮探头,可同时测量温度;带电池和出厂报告。


詳情

産品描述

The measurement of flow velocity and the correct calculation of volumetric flow at ventilation outlets can be a challenge. The turbulence created here and differing flow directions make correct measurement more difficult.

The testo 417 vane anemometer and the testovent 417 measurement funnels provide you with perfect support for flow measurement at ventilation grilles and poppet valves. They ensure simple testing of incoming / outgoing air – such as in the controlled ventilation of living spaces.
 

This is what the testo 417 vane anemometer offers

 
The testo 417 vane anemometer with an integrated 100 mm vane measures flow velocity, volumetric flow and temperature at the same time. The measurement funnels contained in the set enable precise volumetric flow measurement at ventilation grilles. The calculated volumetric flow is shown directly on the vane anemometer's display. In addition, you can switch to the current temperature reading.
 
The direction of flow, i.e. inflow or outflow, is also shown on the display. Timed and multi-point mean calculations provide an indicator of the average volumetric flow, flow velocity and temperature readings. The vane anemometer shows min./max. values and the hold function enables the current readings to be retained. The illuminated display allows you to carry out your measurements even in a dark environment.
 

Ready to start measuring at poppet valves and ventilation grilles with the set

 
This set means you are ready to get started: the testo 417 vane anemometer is simply attached to the testovent 417 measurement funnel for measurement at ventilation grilles or poppet valves. Once you have selected the measurement funnel factor on the vane anemometer, you can start your measurement.
The set comprises the testo 417 vane anemometer and the testovent 417 measurement funnels – one for poppet valves (diameter 200 mm) and one for ventilation grilles (330 x 330 mm). After the measurement, you can safely store or transport the measurement funnels in the bag.
 

Scope of delivery

 
  • testo 417 vane anemometer with integrated 100 mm vane, including calibration protocol and battery
  • testovent 417 measurement funnel for poppet valves (diameter 200 mm)
  • testovent 417 measurement funnel for ventilation grilles (330 x 330 mm)
  • Bag for storing the testovent 417 measurement funnels

産品包含

  • testo 417风速仪,带直径100 mm的叶轮探头,电池和出厂报告。
  • testovent 417 风量罩 圆形风口(200×200 mm)
  • testovent 417 风量罩 方形风口(330×330 mm)

查看此產品的客戶也查看了


技術數據

NTC

測量範圍

0 ~ +50 °C

測量精度

±0.5 °C

解析度

0.1 °C

葉輪風速

測量範圍

+0.3 ~ +20 m/s

測量精度

±(0.1 m/s + 1.5 %測量值)

解析度

0.01 m/s

風量

測量範圍

0 ~ +99999 m³/h

0 ~ +440 m³/h (testo 417 in combination with funnel set (0563 4170))

0.1 ~ +200 m³/h , preferred 0,1 to 100 m³/h (testo 417 in combination with funnel & flow straightener (0554 4172))

解析度

0.1m³/h (0 ~ +99.9 m³/h)

1 m³/h (+100 ~ +99999 m³/h)

技術參數

重量

230 g

直徑

277 x 105 x 45 mm

操作溫度

0 ~ +50 °C

外殼

ABS

電池類型

9 V電池

電池使用時間

50小時

存放溫度

-40 ~ +70 °C


附件

標定證書

ISO标定证书/风速

訂貨號: 0520 0034