testo 417 套装 1 - 风量罩套装

訂貨號  0563 4171

  • testo 417 vane anemometer for measuring flow velocity, volumetric flow and temperature

  • Attachable measurement funnels make it ideal for volumetric flow measurement at ventilation outlets

  • Simple testing of incoming / outgoing air in controlled ventilation of living spaces

  • Important accessories included in the set: measurement funnels for poppet valves and ventilation grilles, along with a bag for storage

testo 417风速仪,带直径100mm的叶轮探头,可同时测量温度;带电池和出厂报告。

産品描述

The measurement of flow velocity and the correct calculation of volumetric flow at ventilation outlets can be a challenge. The turbulence created here and differing flow directions make correct measurement more difficult.

The testo 417 vane anemometer and the testovent 417 measurement funnels provide you with perfect support for flow measurement at ventilation grilles and poppet valves. They ensure simple testing of incoming / outgoing air – such as in the controlled ventilation of living spaces.
 

This is what the testo 417 vane anemometer offers

 
The testo 417 vane anemometer with an integrated 100 mm vane measures flow velocity, volumetric flow and temperature at the same time. The measurement funnels contained in the set enable precise volumetric flow measurement at ventilation grilles. The calculated volumetric flow is shown directly on the vane anemometer's display. In addition, you can switch to the current temperature reading.
 
The direction of flow, i.e. inflow or outflow, is also shown on the display. Timed and multi-point mean calculations provide an indicator of the average volumetric flow, flow velocity and temperature readings. The vane anemometer shows min./max. values and the hold function enables the current readings to be retained. The illuminated display allows you to carry out your measurements even in a dark environment.
 

Ready to start measuring at poppet valves and ventilation grilles with the set

 
This set means you are ready to get started: the testo 417 vane anemometer is simply attached to the testovent 417 measurement funnel for measurement at ventilation grilles or poppet valves. Once you have selected the measurement funnel factor on the vane anemometer, you can start your measurement.
The set comprises the testo 417 vane anemometer and the testovent 417 measurement funnels – one for poppet valves (diameter 200 mm) and one for ventilation grilles (330 x 330 mm). After the measurement, you can safely store or transport the measurement funnels in the bag.
 

Scope of delivery

 
  • testo 417 vane anemometer with integrated 100 mm vane, including calibration protocol and battery
  • testovent 417 measurement funnel for poppet valves (diameter 200 mm)
  • testovent 417 measurement funnel for ventilation grilles (330 x 330 mm)
  • Bag for storing the testovent 417 measurement funnels

 

産品包含

  • testo 417风速仪,带直径100 mm的叶轮探头,电池和出厂报告。
  • testovent 417 风量罩 圆形风口(200×200 mm)
  • testovent 417 风量罩 方形风口(330×330 mm)
NTC

測量範圍

0 ~ +50 °C

測量精度

±0.5 °C

解析度

0.1 °C

葉輪風速儀

測量範圍

+0.3 ~ +20 m/s

測量精度

±(0.1 m/s + 1.5 %測量值)

解析度

0.01 m/s

風速

測量範圍

0 ~ +99999 m³/h

解析度

0.1m³/h (0 ~ +99.9 m³/h)

1 m³/h (+100 ~ +99999 m³/h)

技術參數

直徑

277 x 105 x 45 mm

操作溫度

0 ~ +50 °C

外壳

ABS

电池类型

9 V電池

电池寿命

50小時

存放溫度

-40 ~ +70 °C

重量

230 g