1. Home
  2. 紊流度探头,需配连接电缆0430 0100

紊流度探头,需配连接电缆0430 0100

0628 0143
  • Turbulence measurement in accordance with EN 13779
  • Determination of air velocity and draught risk
  • Integrated temperature and ambient pressure measurement
  • Intelligent calibration concept
  • 产品不再可用。您是否已经知道了新版本?
    您将获益于以下优势:
    >> 转至产品
    请注意,新版本只能与 testo 400 或 testo 440 兼容。
    Draught is the most common cause of complaints about indoor climate. Use the comfort probe to determine turbulence. Turbulence corresponds to the extent of fluctuations in air velocity over time. It is needed to calculate the draught risk. The probe enables you to determine air velocity and draught risk in accordance with EN 13779. The probe can also measure temperature and ambient pressure at the same time.

    Intelligent calibration concept

    The probe offers maximum digital measurement reliability. The digital probe allows readings to be processed directly in the probe. This technology eliminates instrument measurement uncertainty. The probe can be sent in for calibration on its own (without the measuring instrument). Calculating the determined calibration data in the probe generates a zero-error display.

    Comfort probe for turbulence measurement.
    Note: You need a plug-in head cable (0430 0100) for this probe.

    技術參數

    Length probe
    330 mm
    Probe head diameter
    90 mm
    標準
    EN 13779

    NTC

    測量範圍
    0 ~ +50 °C
    測量精度
    ±0.5 °C
    解析度
    0.1 °C

    絕壓

    測量範圍
    +700 ~ +1100 hPa
    測量精度
    ±3 hPa
    解析度
    0.1 hPa

    標定證書

  • 標定證書
    Calibration certificate
    ISO标定证书/风速
      :
      0520 0024
    • 標定證書
      Calibration certificate
      ISO标定证书/压力
        :
        0520 0025
      • 標定證書
        Calibration certificate
        DKD标定证书/风速
          :
          0520 0224