United Arab Emirates
  1. Home
  2. Spare parts

Spare parts

70 products or recommendations for Spare parts
  • Connection hose, silicone

    Connection hose, silicone

    Order-Nr. 0554 0440

    Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).

    • For the connection of Pitot tube and pressure probe

    • Length of 5 m

    AED 172.90
    excl. VAT
    Details
  • Spare dirt filters

    Spare dirt filters (20 off)

    Order-Nr. 0554 3381

    The spare dirt filter protects your analyzer unit against dirt.

    • Reliable protection against dirt particles

    • 20 off

    AED 222.95
    excl. VAT
    Details
  • Battery testo 190/191

    Battery small - battery small

    Order-Nr. 0515 1900

    The battery for data loggers takes just seconds to install, because it fits perfectly when screwed into the logger. This means you do not need to worry about any damage to the data logger as a result of fitting the battery.

    • Small format for space-saving use

    • Can be used at temperatures between -20 and +140 °C

    • Service life of 250 operating hours

    • Changing the battery takes just seconds, saving time and increasing efficiency

    AED 118.30
    excl. VAT
    Details
  • Battery testo 190/191

    Battery large - battery large

    Order-Nr. 0515 1901

    The battery for data loggers takes just seconds to install, because it fits perfectly when screwed into the logger. This means you do not need to worry about any damage to the data logger as a result of fitting the battery.

    • Ideal for measurements at low temperatures, e.g. freeze-drying

    • Can be used at temperatures between -50 and +140 °C

    • Service life of 2,500 operating hours

    • Changing the battery takes just seconds, saving time and increasing efficiency

    AED 432.25
    excl. VAT
    Details
  • testo 190

    Freeze-drying probe holder (puck) - Lyophilization probe holder

    Order-Nr. 0554 1907

    The probe holder ensures precise measurement of the surface temperature in a freeze-drying system. To do this, secure the data logger's flexible temperature probe in the slot of the probe holder. The weight of the probe holder ensures that the temperature probe is in direct contact with the surface.

    • Probe holder for precise measurement of the surface temperature (plate temperature)

    • Enables direct contact with the surface – the ambient air has no influence on the measurement result

    AED 350.35
    excl. VAT
    Details
  • testo 190/191

    Retaining clamp (10 off)

    Order-Nr. 0554 0297

    In combination with cable ties, the retaining clamp enables easy and safe securing of the data logger, e.g. in sterilization systems. Particularly hygienic: the retaining clamp leaves no residues behind in the product or the system, such as those which arise when using adhesive tape.

    • Easy and safe securing of the data logger

    • Reusable multiple times

    • With practical thread for screwing onto the data logger

    AED 46.41
    excl. VAT
    Details
  • testo 190/191

    Distance adapter short

    Order-Nr. 0554 0298

    The distance adapter is used to fix the data logger securely in the programming and readout unit. This enables reliable programming and readout of the logger.

    • For securing the logger in the programming and readout unit

    AED 46.41
    excl. VAT
    Details
  • testo 190/191

    Distance adapter long

    Order-Nr. 0554 0299

    The distance adapter is used to fix the data logger securely in the programming and readout unit. This enables reliable programming and readout of the logger.

    • For securing the logger in the programming and readout unit

    AED 46.41
    excl. VAT
    Details
  • bushing testo 191

    Can and bottle bushing

    Order-Nr. 0554 0458

    This accessory is impressive when it comes to handling and saves time with temperature monitoring in pasteurization and sterilization processes: the can and bottle bushing is screwed directly into the can or bottle top and tightened. All you need to do for the measurement is to guide the logger's temperature probe through the opening and secure it using the union nut.

    • Innovative: fitted by directly screwing it on manually

    • Easy attachment of the data logger on cans and bottles

    • Can be fitted without any pre-drilling

    • Enables precise, reproducible measurement results

    AED 714.35
    excl. VAT
    Details
  • stand testo 191

    Can stand for temperature data loggers - Stand

    Order-Nr. 0554 1906

    Practical accessory for pasteurization and sterilization processes: use the can stand when you want to position the temperature probe reliably and accurately or improve data logger stability. Simply screw the data logger’s thread into the bracket of the can stand and position the can stand or temperature probe as required.

    • Stable can stand prevents the data logger from falling over

    • Fast fitting thanks to screw-in thread

    • Enables reproducible measurement results

    AED 714.35
    excl. VAT
    Details
  • Adhesive tape, e.g. for reflective surfaces

    Emission tape - for measurements on reflective surfaces

    Order-Nr. 0554 0051

    Use the emission tape when you are using your thermal imager to measure on reflective surfaces, for example metal.

    • Tape for measurements on reflective surfaces

    • Temperature-resistant up to +250 °C

    • Emissivity (ɛ) of 0.95

    AED 332.15
    excl. VAT
    Details
  • CO replacement filter for sensor

    CO replacement filter for sensor

    Order-Nr. 0554 4100

    Cross sensitivity to NO and SO2 is blocked by the CO sensor replacement filter during flue gas analysis.

    • Exchangeable probe for CO sensor

    • Blocks cross sensitivity to NO and SO2

    AED 309.40
    excl. VAT
    Details
70 Products found
Show More