Spare parts

57 products or recommendations for Spare parts
  • Spare pH probe

    Order-Nr. 0650 2051

    With the spare pH probe, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe for pH/temperature measuring instrument

    • Easy change of measuring tip

    $235.00
    $258.50 incl. GST
  • Spare pH probe pH2 for pH/temperature measuring instrument

    Order-Nr. 0650 2062

    With the spare pH probe pH2, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe pH2 for pH/temperature measuring instrument

    • Easy change of measuring tip

    $224.00
    $246.40 incl. GST
  • Spare pH probe pH1 for pH/temperature measuring instrument

    Order-Nr. 0650 2061

    With the spare pH probe pH1, it is really easy to replace the measuring tip of your pH/temperature measuring instrument yourself.
    • Spare pH probe pH1 for pH/temperature measuring instrument

    • Easy change of measuring tip

    $108.00
    $118.80 incl. GST
  • Spare thermal paper

    Order-Nr. 0554 0568

    Spare thermal paper, permanent ink
    • Permanent thermal paper

    • 6 rolls

    $47.00
    $51.70 incl. GST
  • Connection hose, silicone

    Order-Nr. 0554 0440

    Use the connection hose to connect suitable Pitot tubes and pressure probes with one another. The hose is made of silicone and has a max. load capacity of up to 700 hPa (mbar).
    • For the connection of Pitot tube and pressure probe

    • Length of 5 m

    $74.00
    $81.40 incl. GST
  • Battery, 3.6 V/1.9 Ah 1AA

    Order-Nr. 0515 0177

    Battery, 3.6 V/1.9 Ah 1AA
    • Lithium mignon battery (AA)

    $54.00 incl. GST
  • Battery, 3.6 V/0.8 Ah 1/2 AA

    Order-Nr. 0515 0175

    Battery, 3.6 V/0.8 Ah 1/2 AA
    $32.00 incl. GST
  • Spare particle filter, pack of 20

    Order-Nr. 0554 3381

    The spare dirt filter protects your analyzer unit against dirt.
    • Reliable protection against dirt particles

    • 20 off

    $135.00
    $148.50 incl. GST
  • Sintered PTFE filter, Ø 12 mm, for corrosive media

    Order-Nr. 0554 0756

    Sintered PTFE filter, Ø 12 mm, for corrosive media
    $85.00
    $93.50 incl. GST
  • Reflectors, self-adhesive (1 pack = 5 off, each 150 mm long)

    Order-Nr. 0554 0493

    Reflectors, self-adhesive (1 pack = 5 off, each 150 mm long)
    $31.00
    $34.10 incl. GST
  • Emission tape - for measurements on reflective surfaces

    Order-Nr. 0554 0051

    Use the emission tape when you are using your thermal imager to measure on reflective surfaces, for example metal.
    • Tape for measurements on reflective surfaces

    • Temperature-resistant up to +250 °C

    • Emissivity (ɛ) of 0.95

    $130.00
    $143.00 incl. GST
  • CO replacement filter for sensor

    Order-Nr. 0554 4100

    Cross sensitivity to NO and SO2 is blocked by the CO sensor replacement filter during flue gas analysis.
    • Exchangeable probe for CO sensor

    • Blocks cross sensitivity to NO and SO2

    $183.00
    $201.30 incl. GST
  • Spare dirt filters (10 off) - for condensate trap in the gas sampling hose and measuring range extension

    Order-Nr. 0554 3371

    The spare dirt filter enables you to reliably protect the condensate trap in the gas sampling hose and measuring range extension (gas dilution) against dirt.
    • Reliable protection against dirt particles

    • 10 off

    $91.00
    $100.10 incl. GST
  • Spare sintered filters (2 off)

    Order-Nr. 0554 3372

    The spare sintered filter enables you to replace your probe’s pre-filter without any problem.
    • For replacing the probe pre-filter

    • Ideal for measuring flue gases with a high dust content

    • Protects against damage caused by dust

    $162.00
    $178.20 incl. GST
  • Testo rechargeable battery pack NiMH for control unit tesot ...

    Order-Nr. 0515 0097

    Testo rechargeable battery pack NiMH for control unit tesot 350-S/-XL
    $270.00
    $297.00 incl. GST
  • NO replacement filter for sensor

    Order-Nr. 0554 4150

    Cross sensitivity to SO2 is blocked by the NO sensor replacement filter during flue gas analysis.
    • Exchangeable probe for NO sensor

    • Blocks cross sensitivity to SO2

    $202.00
    $222.20 incl. GST
  • Probe shaft, length 335 mm, incl. cone, Ø 8 mm, Tmax 1000 °C

    Order-Nr. 0554 8764

    The probe shaft with integrated thermocouple enables temperature measurements up to 1000°C. The quick-change click system enables the probe shaft to be fixed onto the appropriate handle really easily.
    • Easy probe shaft change via quick-change click system

    • For temperature measurements up to 1000°C

    • Length of 335 mm

    $669.00
    $735.90 incl. GST
  • Filter paper to determine smoke number; 40 strips for approx...

    Order-Nr. 0554 0308

    Filter paper to determine smoke number; 40 strips for approx; 200 measurements
    $12.00
    $13.20 incl. GST
  • Probe shaft, length 700 mm, incl. cone, Ø 8 mm, Tmax. 1000 °...

    Order-Nr. 0554 8765

    The probe shaft with integrated thermocouple enables temperature measurements up to 1000°C. The quick-change click system enables the probe shaft to be fixed onto the appropriate handle really easily.
    • Easy probe shaft change via quick-change click system

    • For temperature measurements up to 1000°C

    • Length of 700 mm

    $930.00
    $1 023.00 incl. GST
  • Button cell battery (LR44)

    Order-Nr. 0515 0032

    Button cell battery (LR44) with a voltage of 1.5 volts.
    • 4 button cell batteries (LR44)

    $9.90 incl. GST
57 Products found
Show More