logo
Emission analyzer testo 350

Monitoring and optimizing cement production

Worldwide, no material is used more for building than cement – and the demand is increasing daily. Accordingly, supply is growing, and the competition on the market is becoming tougher. As a result, impeccable product quality as well as time- and cost-efficient production are of crucial importance. On top of this, numerous environmental protection regulations must be adhered to.

The use of the most modern measurement technology, such as that of the testo 350, is thus indispensable.

Download application example as a PDF

The challenge

Testing furnace atmosphere

In cement production, three main areas of use for the monitoring and analysis of occurring emissions can be defined.

Testing furnace atmosphere in brick production

In this area, average temperatures of 1,100 °C to 1,300 °C are reached. In addition to this, concentrations of 2 Vol. % O2, max. 500 ppm CO and approx. 1,000 ppm NO are to be expected. A possible site for recording these values can be at the rotary furnace exit, for example. Here it is easy to establish whether incorrect air intake occurs between the pre-heating input and the pre-heating exit.

Testing furnace atmosphere in the pre-heater

In the core process of cement production, the raw material is passed down through a cyclone tower, where it is treated with hot process air from the opposite direction in order to drove out the CO2. At the exit from the pre-heater, measurement values of 700 °C, 3 Vol. % O2, 500 ppm CO and 400 ppm NO are to be expected. Daily measurement of these parameters is recommended.

The solution

testo 350 emission analyser - the advantages at a glance

The portable emission measuring instrument testo 350 is the ideal tool for professional flue gas analysis. It consists of the control unit and the analyzer box.
The control unit is the removable control and display unit of the testo 350. The measurement values are clearly presented in the colour graphic display of the control unit. The measurement technology is situated in the analyzer box. Thanks to the internal memory, measurement data can be transferred from the analyzer box to the control unit. If required, several analyzer boxes can be simultaneously operated and controlled with one control unit. The robust housing of the measuring instrument has an integrated impact protection. Downtimes due to instrument contamination are almost completely eliminated by the robust design. Closed chambers also protect the interior of the instrument from contamination from the surroundings.

As an alternative to the control unit, operation can also be carried out in direct connection with a PC or notebook. After programming, the analyzer box can conduct measurements and store data independently. This increases the efficiency of your measurement routine.