Temperature measurement

134 products or recommendations for Temperature measurement
  • testo Smart Probes AC & Refrigeration Test & Load kit

    Order-Nr. 0563 0009

    For refrigeration engineers: The kit contains two testo 549i high-pressure gauges, two testo 605i thermohygrometers and two testo 115i clamp thermometers. Used in conjunction with your smartphone/tablet, the kit is ideal for servicing, troubleshooting and installing air conditioning and refrigeration systems. The testo Smart Probes App makes your work easier and more efficient: over 90 stored refrigerants, automatic calculation of superheating/subcooling, target superheat and cooling/heating load, emailing of measurement data reports as PDF or Excel files.
    • Application-specific measurement menus for superheating/subcooling, target superheat, heating/cooling power

    • More than 90 common refrigerants plus refrigerant updates in the testo Smart Probes App

    • 350 ft Bluetooth® range for particularly flexible applications

    • Transmission and analysis of measurement data via testo Smart Probes App

  • testo Smart Probes AC & refrigeration test kit

    Order-Nr. 0563 0002 20

    For refrigeration engineers: Compact kit containing testo 549i high-pressure gauge and testo 115i clamp thermometer (two of each). Used in conjunction with your smartphone/tablet, the kit is ideal for servicing, troubleshooting and installing air conditioning and refrigeration systems. The testo Smart Probes App makes your work easier and more efficient: over 90 stored refrigerants, automatic calculation of superheating/subcooling, emailing of measurement data reports as PDF or Excel documents.
    • Application-specific measurement menus for superheating/subcooling

    • More than 90 common refrigerants plus refrigerant updates in the testo Smart Probes App

    • 350 ft Bluetooth® range for particularly flexible applications

    • Transmission and analysis of measurement data via testo Smart Probes App

  • testo 425 - Hot wire anemometer

    Order-Nr. 0560 4251

    The testo 425 hot wire anemometer can measure cubic feet per minute (CFM) when conducting duct testing, as well as easily switch between flow and temperature readings. The telescoping handle of the thermal probe on this CFM meter makes it easy to reach ductwork above your head.
    • Telescoping hot wire probe

    • Measures velocity, volume flow (CFM), and temperature

    • Timed and multi-point average flow calculations

    • Auto-off function saves battery life

  • testo 830-T1 - Infrared thermometer with laser marking (10:1 optics)

    Order-Nr. 0560 8311

    The testo 830-T1 infrared thermometer allows for efficient, non-contact surface temperature measurements to be carried out. This IR thermometer will leave you well equipped, especially for control readings in trade and industry. The gun style design is easy to handle, and the integrated processor provides accurate measurement results.
    • Laser measurement point marker and large optics for exact measurement at greater distances

    • Fast recording of measurement values at two measurements per second

    • Hold function and display of min./max. values

    • Adjustable emission factor 0.1 to 1.0

  • testo 830-T2 - Infrared thermometer with 2-point laser marking (12:1 optics)

    Order-Nr. 0560 8312

    The testo 830-T2 infrared thermometer enables you to carry out efficient, non-contact surface temperature measurements. This IR thermometer will ensure that you are well equipped, especially for undertaking control measurements in trade and industry. The gun style design is easy to handle, and the integrated processor provides accurate measurement results.
    • Infrared thermometer for non-contact surface temperature measurements

    • 12:1 optics and high resolution processor for accurate measurement results

    • Contact measurement possible with connectable temperature probe (TC type K)

    • Adjustable emission level

  • testo 405i - Hot-wire anemometer wireless Smart Probe

    Order-Nr. 0560 1405

    The testo 405i Smart Probe is a wireless instrument for measuring air flow velocity, temperature, and volume flow.  It is equipped with a telescopic shaft, which extends to 15” for easy in-duct testing.  You can reliably determine timed and multipoint flow traverses.
    • Measures air velocity, volume flow, and temperature

    • Measures in-duct air flow, and automatically calculates volume flow (simply enter the duct dimensions)

    • Small diameter (<0.5”) and 15” telescopic shaft length is ideal for in-duct flow averaging and timed traverse

    • Perform air duct leakage tests

  • testo Smart Probes HVAC/R Complete kit

    Order-Nr. 0563 0007

    Complete kit for all-round engineers in the field of heating, air conditioning, refrigeration and ventilation: The kit contains all the testo Smart Probes and is ideal for carrying out functional checks or for plant maintenance, in conjunction with your smartphone/tablet. The testo Smart Probes App enables you to work more easily and efficiently: Automatically calculate numerous parameters such as superheating/subcooling, target superheat, cooling/heating load, differential temperature or mold indication. Measurement data reports can be emailed directly as a PDF or Excel file.

    **NOTE** The testo 115i, 549i, and 605i Smart Probes now have an extended Bluetooth range of up to 350 Feet!**
    • For all measurements involving heating, air-conditioning, refrigeration and ventilation systems

    • All Smart Probes for temperature, pressure, humidity and flow in one kit

    • Display of measurement data progression as a graph or table

    • Transmission and analysis of measurement data via testo Smart Probes App

  • testo Smart Probes VAC kit

    Order-Nr. 0563 0003 10

    For air-conditioning engineers: Compact kit containing four measuring instruments for your most important measuring tasks in, on and involving air conditioning systems. The testo Smart Probes App enables you to work more easily and efficiently: Use intuitive measurement menus for volume flow measurement, for automatic calculation of the dew point and wet bulb temperature or for detecting areas susceptible to mould according to the traffic light principle. Measurement data reports can be emailed directly as a PDF or Excel file.
    • Measurement of air and surface temperature, humidity, air velocity and volume flow

    • Measurement menus for volume flow measurement in ducts and at outlets, identification of mould risk, easy image documentation including IR temperature reading and measurement spot marking

    • Display measurement data as a graph or table and analyze and send via testo Smart Probes App

    • In conjunction with your smartphone/tablet, carry out the most important measurements involved in air conditioning systems

  • testo 405 - Pocket-sized thermal anemometer

    Order-Nr. 0560 4053

    Use the testo 405 thermal anemometer to measure air velocity, volumetric flow, and air temperature. It is suitable for carrying out quick check measurements in ventilation ducts, and for measuring the air velocity in rooms, such as at drafty windows.
    • Volume flow calculation of up to 99,990 m3/h

    • Easily read data at any angle with rotating display

    • Telescopic handle up to 300 mm

    • Ideal for measurements in ducts

  • testo 416 - Small vane anemometer

    Order-Nr. 0560 4160

    The testo 416 small vane anemometer (air flow meter) accurately and easily measures air velocity and volume flow (CFM) for in-duct and a variety of HVAC applications above 120 fpm. As vane technology is inherently air density independent, the testo 416 handheld digital vane anemometer provides repeatable and reliable readings test after test.
    • Small (0.63 inch) vane for in-duct measurement

    • Direct display of volume flow (CFM)

    • Multi-point and timed average calculations make fast and simple work of duct traverses

    • Bright backlit display provides easy viewing in any environment

  • testo 480 - Digital temperature and humidity meter

    Order-Nr. 0563 4800

    Air flow measurements in ventilation ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms – the testo 480 temperature and humidity meter comes with a wide range of optional sensors that allow you to measure, analyze, and log these and a variety of other parameters with only one device.
    • High quality optional sensors for measuring air flow / temperature / humidity / pressure / degree of turbulence / heat radiation / CO2 / illumination intensity / PMV / PPD / WBGT

    • High precision, integrated pressure difference sensor included

    • Pro-software for easy and efficient analysis and logging included

    • Intelligent calibration concept

  • testo 110 - One-channel temperature measuring instrument

    Order-Nr. 0560 1108

    Cold storage rooms, cold storage warehouses, outdoors: the testo 110 digital temperature meter shows what it’s really made of when temperatures start to drop. Thanks to NTC technology, it can measure temperatures in very low temperature environments.
    • Extremely accurate in very low temperature ranges, i.e. cold storage rooms

    • Optional connectable temperature sensor and wireless sensor for different applications in the field

    • Audible alarm, user-defined thresholds

    • HACCP compliant, certified according to EN 13485 for use in the food sector

  • testo 410-2 - Vane anemometer with humidity measurement

    Order-Nr. 0560 4102

    The testo 410-2 handheld anemometer with humidity measures air flow, air temperature, and humidity quickly, easily, and accurately. The compact testo 410-2 air and humidity meter is ideal for fast comfort spot checks and timed averaging calculation.
    • Integrated RH sensor provides %rH, wet bulb, and dew point readings

    • Small 1.5 inch vane meter

    • Hold, Min, Max, and Timed averaging

    • Lens cover and leather belt case keep it protected - even in your tool box

  • testo 410-1 - Vane anemometer

    Order-Nr. 0560 4101

    The testo 410-1 pocket anemometer measures air flow and air temperature quickly, easily, and accurately. The integrated 1.5 inch vane makes this economical air flow instrument ideal for fast air velocity measurement spot checks.
    • Integrated, small 1.5 inch vane

    • Hold, Min, Max, and Timed averaging

    • Bright backlit display for easy viewing, no matter the environment

    • Lens cover and leather belt case keep it protected

  • testo 810 - Pocket-sized temperature measuring instrument

    Order-Nr. 0560 0810

    The testo 810 infrared thermometer allows for the simultaneous measurement of the air temperature and surface temperature of the object being measured – without contact. This infrared temperature measuring instrument automatically displays the temperature difference. This makes it particularly suitable for use in the heating, ventilation, and air conditioning trades.
    • Infrared measurement with 1-point laser sighting and 6:1 optics ratio

    • Display of differential temperature, such as between a window and air

    • Hold function and min./max. values

    • Display illumination

  • testo 435-4 - Multifunction meter w/ memory, software, and differential pressure

    Order-Nr. 0563 4354

    The testo 435-4 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-4.
    • Integrated differential pressure measurements for flow velocity

    • Optional wireless (RF) temperature and humidity probes for remote measurement

    • Backlit LCD for easy viewing

    • Built-in memory stores up to 10,000 measurements

  • testo 410i - Vane anemometer wireless Smart Probe

    Order-Nr. 0560 1410

    The testo 410i Smart Probe is a compact wireless vane anemometer for measuring air velocity, temperature, and deriving volume flow.  It can be used at air outlets, and for monitoring the air flow of ventilation systems.
    • Measures air velocity, volume flow, and temperature, as well as air flow at registers, and automatically calculates volume flow (simply enter the duct dimensions)

    • No air density correction required, due to its design

    • Measure volume flow at several outlets simultaneously (using mutiple Smart Probes), to adjust system balance

    • Timed/multipoint averaging to get accurate air flow profiles

  • testo 417 Kit - Rotating Vane Anemometer

    Order-Nr. 400563 4170

    With readings of up to 4,000 fpm and the attached large vane, the testo 417 rotating vane anemometer kit is ideal for collecting reliable measurements for air velocity, CFM, and temperature at both supply and return grills. The included soft carrying case ensures the air flow meter is protected against light drops and the elements.
    • Soft carrying case for worry-free transportation

    • Air velocity, CFM, and temperature measurements

    • Multi-point and timed average calculations for in-duct readings

    • Bright backlit display provides easy viewing in any environment

  • testo 435-2 - Multifunction meter w/ memory and software

    Order-Nr. 0563 4352

    The testo 435-2 multifunction meter is perfect for monitoring, analyzing, and diagnosing indoor air quality, wherever you need to take important IAQ measurements. In addition, you can easily pinpoint and troubleshoot problems with HVAC systems, and immediately see the results of corrections. Commissioning, validating, benchmarking, or simpy adjusting HVAC systems are all easy with the testo 435-2.
    • Built-in memory stores up to 10,000 measurements

    • Optional wireless (RF) temperature and humidity probes for remote measurement

    • Backlit LCD for easy viewing

    • Optional printer allows for easy documenting of measured data

  • testo 815 - Sound level measuring instrument

    Order-Nr. 0563 8155

    Determine the noise level quickly, easily, and reliably in your day to day work with the testo 815 sound level meter.
    • Frequency evaluation according to characteristic curves A and C

    • Easy to adjust (adjustment screwdriver included in the scope of delivery)

    • Min./max. memory

    • Integrated tripod knuckle screw (1/4 inch)

134 Products found
Show More