Temperature measurement

47 products or recommendations for Temperature measurement
  • testo 882 - Adjustable focus thermal imager (320x240 FPA)

    Order-Nr. 0560 0882 70

    The testo 882 is a feature rich thermal imager that can be used in a variety of thermography applications. With easy one handed operation, 32° adjustable focus lens, and Lens Protector, the testo 882 thermal imager is a versatile solution for a wide variety of thermal imaging applications.

    • 32° wide angle lens with 7“ minimum focal point

    • Solar mode identifies solar intensity values

    • SuperResolution technology enhances image quality to 640x480

    • TwinPix overlays IR image over real image

  • Surface Probe Short Term Range - Surface Probe Short Term Range

    Order-Nr. 0602 0393

    Stub type, uneven surface temperature probe with a Type K thermocouple connection. Probe is designed to be used for short term measurements.

    • Fast response time (3 seconds) thanks to the thermocouple strip

    • Thermocouple type K

    • Also suitable for uneven surfaces

    • Measuring range short-term up to +500°C

  • Waterproof Immersion Probe

    Order-Nr. 0602 1293

    A Type K Thermocouple waterproof immersion/penetration probe. This probe is capable of reading temperature values from -76.0° to 752.0 °F.

    • Thermocouple type K

    • Response time of 7 seconds

    • Waterproof

    • Measuring range: -60 to +400 °C

  • Temperature Probe with Magnet

    Order-Nr. 0602 4892

    Temperature probe with magnet for surface measurements on metal surfaces

    • Self-adhesive thanks to a magnet: probe for measuring surface temperature on metal surfaces

    • TC Type K temperature probe with 1.6 m cable

    • Measuring range: (-60 to 750 °F) -50 to +400 °C

  • Air Probe (Type K)

    Order-Nr. 0602 1793

    Air Probe with a Type K connection allows you to accurately measure air temperature. Compatible with any Testo product with a Type K connector, this Air Probe is a solution for a variety of temperature applications.

    • Thermocouple type K 

    • Short response time thanks to the exposed sensor 

    • Can be connected to a wide range of measuring instruments

    • Measuring range: -60 to +400 °C

  • Pipe Clamp Surface Probe

    Order-Nr. 0602 4592

    Pipe clamp probe for measuring pipes with a diameter of 0.2” to 2.5''.  Probe is capable of short term measurements of up to 536 °F.

    • Enables quick, easy attachment of the probe to pipes with a diameter of 0.2” to 2.5”

    • TC Type K temperature probe with 4 foot cable

    • Measuring range: -76 to 266 °F, briefly up to 536 °F

  • Fast-action TC immersion probe

    Order-Nr. 0602 0593

    Efficient and fast-action immersion probe, waterproof, T/C Type K

    • Short response time of 2 seconds

    • Thermocouple type K

    • Waterproof

    • Very large measuring range: -60 to +1000 °C

  • testo 875i-1 - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 71

    The testo 875i-1 is a feature packed adjustable lens thermal imager. The 875i-1 is an ideal solution for for a variety of industrial applications including thermal imaging inspection, as well as solar panel inspection.

    • Solar mode identifies solar intensity values

    • SuperResolution Technology enhances image quality to 320 x 240

    • Automatic hot/cold spot recognition

    • Advanced report writing and image analysis with included software

  • Air Probe - NTC

    Order-Nr. 0613 1712

    NTC Air Probe with a miniDIN type connection allows you to accurately measure air temperature. Compatible with any Testo product with a miniDIN connector, the NTC Air Probe is a solution for a variety of temperature applications.

    • Short response time thanks to the exposed sensor

    • High level of accuracy of up to ±0.2 °C 

    • Measuring range: -50 to +125 °C

    • NTC temperature sensor

  • testo 885-2 - Thermal imager (320 x 240 FPA)

    Order-Nr. 0563 0885 72

    The testo 885-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With an optional 11° telephoto lens and lens protector, the testo 885-2 thermal imager is the ideal solution for wide angle and narrow field thermography.

    • Optional 11° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 875i-2 - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 72

    The testo 875i-2 is a feature packed adjustable lens thermal imager. The 875i-2 is an ideal solution for for a variety of industrial applications including thermal imaging inspection, as well as solar panel inspection.

    • Interchangeable telephoto lens for additional application usage

    • Built in digital camera with Twin Pix allows capture of both thermal captures, as well as digital images

    • SuperResolution Technology enhances image quality to 320 x 240

    • Advanced report writing and image analysis with included software

  • testo 875i-2 Deluxe Kit - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 73

    The testo 875i-2 Deluxe Kit is a fully loaded thermal imager with telephoto lens. Included in the kit is an interchangeable telephoto lens, a lens protection glass, as well as an additional battery and quick charger, ensuring there is little downtime when using the thermal imager for extended periods of time.

    • Thermal sensitivity to <50mK will show even minimal temperature differences

    • Large 3.5” LCD screen, and 160 x 120 resolution ensures easy onsite image analysis

    • Power LEDs guarantee optimal illumination for both the digital pictures, as well as optical thermal im

    • Solar mode enters and saves sunlight values for each thermal image

  • testo 885-2 - Deluxe thermal imager kit (320 x 240 FPA)

    Order-Nr. 0563 0885 73

    The testo 885-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With its included 11° telephoto lens and lens protector, the testo 885-2 deluxe kit is the ideal solution for wide angle and narrow field thermography.

    • Included 11° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 890-2 - Thermal imager (640 x 480 FPA)

    Order-Nr. 0563 0890 72

    The testo 890-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With an optional 15° telephoto lens and lens protector, the testo 890-2 thermal imager is the ideal solution for wide angle and narrow field thermography.

    • Optional 15° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 890-2 - Deluxe thermal imager kit (640 x 480 FPA)

    Order-Nr. 0563 0890 73

    The testo 890-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With its included 15° telephoto lens and lens protector, the testo 890-2 deluxe kit is the ideal solution for wide angle and narrow field thermography.

    • Included 15° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 890-1 - Thermal imager (640 x 480 FPA)

    Order-Nr. 0563 0890 71

    The testo 890-1 is a cost effective thermal imager that can be used in a variety of industrial applications, such as solar panel inspection.

    • 1,280 x 960 SuperResolution images using included IRSoft analysis

    • Large 4.3" rotating touchscreen display

    • 2GB SD card for storage included

    • Optional lens protection glass

47 Products found
Show More