Electrical facilitiy maintenance

45 products or recommendations for Electrical facilitiy maintenance
  • testo 770-3 - Hook clamp and power meter with Bluetooth

    Order-Nr. 0590 7703

    The testo 770-3, in addition to the features of the other meters in the testo 770 series, includes real-time power measurements (Watts), power factor, and Bluetooth. The Testo app can be used for remote viewing, monitoring, data logging, and creating reports. This powerful app allows you to create custom reports that include photos, data, and graphs that can be saved, or sent via email.

    • Unique hook-on function separates and grabs wires, without using your hands, and the retractable post makes hook release in tight spaces fast and easy

    • Bluetooth, coupled with the free testo Smart Probes app, works with smartphones and tablets for remote viewing, data logging, and report creation

    • Real-time power measurements (Watts), with simultaneous power factor indication  

    • μA parameter for flame rod (ignition flame sensor) testing, and temperature measurement using optional type K thermocouple adapter

  • testo 760-2 - Digital multimeter with type K and TRMS

    Order-Nr. 0590 7602

    In addition to the features of the testo 760-1, the testo 760-2 includes TRMS measurements, duty cycle, low pass filter, and temperature measuring functionalities.  Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-2 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • TRMS with low pass filter, duty cycle, and type K temperature measurement

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • Measure up to 400 A with optional clamp probe adapter

  • testo 745 - Non-contact voltage tester with built-in flashlight

    Order-Nr. 0590 7450

    The testo 745 non-contact voltage (NCV) tester quickly checks for the presence of voltage in AC powered systems.  It can be safely used up to 1000 V AC.  When AC voltage is detected, the testo 745 gives an indication, by flashing its red LED tip, and buzzing its internal audible buzzer.  You can easily determine the hot and neutral legs of an outlet, without the time consuming and risky removal of the outlet from the outlet box.

    • Two sensitivity levels, with audible and visual indication

    • Flashing LED indicates sensitivity range, down to 12 V AC, or standard range above 50 V AC

    • Differentiates hot from neutral in AC outlets

    • Low pass filter reduces false indications

  • testo 760-1 - Digital multimeter

    Order-Nr. 0590 7601

    Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-1 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • Meter prevents switching from V to A, or A to V, if the leads are not in the proper socket

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • 3 buttons that illuminate for easy and clear selection of test functions

  • testo 760-3 - Digital multimeter with type K, TRMS, and 1,000 V range

    Order-Nr. 0590 7603

    In addition to the features of the testo 760-2, the testo 760-3 has an AC/DC voltage measuring range of 1,000 V, and includes TRMS, duty cycle, low pass filter, and temperature measuring functionalities.  Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-3 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • 1,000 V AC/DC voltage measuring range, TRMS, and low pass filter

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • Measure up to 400 A with optional clamp probe adapter

  • testo 882 - Adjustable focus thermal imager (320x240 FPA)

    Order-Nr. 0560 0882 70

    The testo 882 is a feature rich thermal imager that can be used in a variety of thermography applications. With easy one handed operation, 32° adjustable focus lens, and Lens Protector, the testo 882 thermal imager is a versatile solution for a wide variety of thermal imaging applications.

    • 32° wide angle lens with 7“ minimum focal point

    • Solar mode identifies solar intensity values

    • SuperResolution technology enhances image quality to 640x480

    • TwinPix overlays IR image over real image

  • testo 770-1 - Hook clamp meter

    Order-Nr. 0590 7701

    The testo 770-1 hook clamp meter is ideally suited for electrical work in HVAC applications. Testo’s unique hooking clamp design can be used to separate and grab wires. The easy hook-off retractable post releases the wires when testing in tight spaces. You can safely work without using your hands.

    • Unique hook-on function separates and grabs wires, without using your hands

    • Retractable post makes hook release fast and easy

    • Inrush (starting) current capture, APO (Auto Power Off), and Min / Max / Hold

  • testo 750-3 - Digital Voltage Tester with GFCI Test

    Order-Nr. 0590 7503

    The 750-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit. The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

    The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • GFCI Test Function

    • 3-digit LCD showing the actual voltage
      measurements

    • Patented all-around viewable LED voltage bar indication

    • Built-in flashlight for testing in dark places

  • testo 770-2 - Hook clamp meter with thermocouple adapter

    Order-Nr. 0590 7702

    In addition to the standard functions of the testo 770-1 hook clamp meter, the testo 770-2 includes a thermocouple adapter, and measures microamps.

    • Unique hook-on function separates and grabs wires, without using your hands

    • Retractable post makes hook release fast and easy

    • μA for flame rod (ignition flame sensor) testing, and can measure temperature using type K thermocouple adapter

  • testo 750-2 - Digital Voltage Tester with GFCI Test

    Order-Nr. 0590 7502

    The testo 750-2 includes a single probe voltage tester, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit. The testo 750 vibrates ensuring that the GFCI circuit test is active.  The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • GFCI Test Function

    • Single probe voltage testing

    • Patented all-around viewable LED voltage bar indication

    • Phase sequence test for determining motor rotation and polarity detection for VDC measurements

  • testo 755-2 - Current / Voltage Meter with 200 A AC, 1000 V AC/DC, Continuity, and Phase Rotation Tester

    Order-Nr. 0590 7552

    The testo 755-2 includes important additional features: phase rotation, voltage range up to 1000V, and the unique feature which allows the user to check for voltage using only a single lead.  The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

    • Phase rotation tester and voltage range up to 1000 V

    • Unique feature which allows the user to check for voltage using only a single lead

    • Polarity detection for DC circuits

    • Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

  • testo 750-1 - Digital Voltage Tester

    Order-Nr. 0590 7501

    The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication.  All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • Patented all-around viewable LED voltage bar indication

    • 0 to 690 V AC/DC voltage measurement

    • Polarity detection for VDC measurements

    • Phase sequence test for determining motor rotation

  • testo 755-1 - Current / Voltage Meter with 200 A AC, 600 V AC/DC, and Continuity

    Order-Nr. 0590 7551

    The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

    • Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

    • Polarity detection for DC circuits

    • 3-phase sequence check with motor rotation indication

    • Single lead voltage test with audible indication

  • testo 875i-1 - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 71

    The testo 875i-1 is a feature packed adjustable lens thermal imager. The 875i-1 is an ideal solution for for a variety of industrial applications including thermal imaging inspection, as well as solar panel inspection.

    • Solar mode identifies solar intensity values

    • SuperResolution Technology enhances image quality to 320 x 240

    • Automatic hot/cold spot recognition

    • Advanced report writing and image analysis with included software

  • testo 885-2 - Thermal imager (320 x 240 FPA)

    Order-Nr. 0563 0885 72

    The testo 885-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With an optional 11° telephoto lens and lens protector, the testo 885-2 thermal imager is the ideal solution for wide angle and narrow field thermography.

    • Optional 11° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 875i-2 - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 72

    The testo 875i-2 is a feature packed adjustable lens thermal imager. The 875i-2 is an ideal solution for for a variety of industrial applications including thermal imaging inspection, as well as solar panel inspection.

    • Interchangeable telephoto lens for additional application usage

    • Built in digital camera with Twin Pix allows capture of both thermal captures, as well as digital images

    • SuperResolution Technology enhances image quality to 320 x 240

    • Advanced report writing and image analysis with included software

  • testo 875i-2 Deluxe Kit - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 73

    The testo 875i-2 Deluxe Kit is a fully loaded thermal imager with telephoto lens. Included in the kit is an interchangeable telephoto lens, a lens protection glass, as well as an additional battery and quick charger, ensuring there is little downtime when using the thermal imager for extended periods of time.

    • Thermal sensitivity to <50mK will show even minimal temperature differences

    • Large 3.5” LCD screen, and 160 x 120 resolution ensures easy onsite image analysis

    • Power LEDs guarantee optimal illumination for both the digital pictures, as well as optical thermal im

    • Solar mode enters and saves sunlight values for each thermal image

  • testo 885-2 - Deluxe thermal imager kit (320 x 240 FPA)

    Order-Nr. 0563 0885 73

    The testo 885-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With its included 11° telephoto lens and lens protector, the testo 885-2 deluxe kit is the ideal solution for wide angle and narrow field thermography.

    • Included 11° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 890-2 - Thermal imager (640 x 480 FPA)

    Order-Nr. 0563 0890 72

    The testo 890-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With an optional 15° telephoto lens and lens protector, the testo 890-2 thermal imager is the ideal solution for wide angle and narrow field thermography.

    • Optional 15° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

  • testo 890-2 - Deluxe thermal imager kit (640 x 480 FPA)

    Order-Nr. 0563 0890 73

    The testo 890-2 is a feature-rich thermal imaging infrared camera that can be used in a variety of thermographic applications. With its included 15° telephoto lens and lens protector, the testo 890-2 deluxe kit is the ideal solution for wide angle and narrow field thermography.

    • Included 15° telephoto lens, allows for detailed imaging at a distance

    • Site recognition and database allow you to easily revisit past information by scanning a barcode

    • Radiometric video / sequence imaging capture enable detailed image analysis at timed thermic events

    • Solar mode for detecting invisible defects on solar panel arrays

45 Products found
Show More