Mechanical maintenance

Signs of wear in machinery often become apparent long before a malfunction, due to an increase in temperature. Possible causes are friction, incorrect adjustment, tolerances of mechanical components or a lack of lubricant. With a thermal imager, any suspicious changes can be spotted immediately. The main advantage of using thermography in a maintenance operation: it is non-contact and can therefore be carried out on all mechanical installations during operation and from a safe distance. Typical applications for the thermal imager: checking engines, checking bearings, checking shafts.

77 products or recommendations for Mechanical maintenance
  • testo 872 - thermal imager with App

    Order-Nr. 0560 8721

    The testo 872 thermal imager gives you the best possible support for your work in professional industrial and building thermography. Take thermal images quickly, reliably and smartly with the highest image quality, very good thermal sensitivity and innovative functions. The case supplied with the thermal imager means it can be conveniently transported, so it is always there for you when needed.

    • Highest image quality: IR resolution of 320 x 240 pixels, via integrated testo SuperResolution Technology 640 x 480 pixels

    • Precise measurement: thermal sensitivity of 0.06°C

    • Smart and wireless: use your mobile device with the free testo Thermography App and wirelessly transmit readings from the testo 770-3 clamp meter and the testo 605i humidity measuring instrument (both available separately)

    • Integrated laser marker – can also be precisely visualized as a measuring point in the thermal image

  • testo 760-2 - Digital multimeter with type K and TRMS

    Order-Nr. 0590 7602

    In addition to the features of the testo 760-1, the testo 760-2 includes TRMS measurements, duty cycle, low pass filter, and temperature measuring functionalities.  Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-2 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • TRMS with low pass filter, duty cycle, and type K temperature measurement

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • Measure up to 400 A with optional clamp probe adapter

  • testo 745 - Non-contact voltage tester with built-in flashlight

    Order-Nr. 0590 7450

    The testo 745 non-contact voltage (NCV) tester quickly checks for the presence of voltage in AC powered systems.  It can be safely used up to 1000 V AC.  When AC voltage is detected, the testo 745 gives an indication, by flashing its red LED tip, and buzzing its internal audible buzzer.  You can easily determine the hot and neutral legs of an outlet, without the time consuming and risky removal of the outlet from the outlet box.

    • Two sensitivity levels, with audible and visual indication

    • Flashing LED indicates sensitivity range, down to 12 V AC, or standard range above 50 V AC

    • Differentiates hot from neutral in AC outlets

    • Low pass filter reduces false indications

  • testo 760-1 - Digital multimeter

    Order-Nr. 0590 7601

    Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-1 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • Meter prevents switching from V to A, or A to V, if the leads are not in the proper socket

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • 3 buttons that illuminate for easy and clear selection of test functions

  • testo 760-3 - Digital multimeter with type K, TRMS, and 1,000 V range

    Order-Nr. 0590 7603

    In addition to the features of the testo 760-2, the testo 760-3 has an AC/DC voltage measuring range of 1,000 V, and includes TRMS, duty cycle, low pass filter, and temperature measuring functionalities.  Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-3 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • 1,000 V AC/DC voltage measuring range, TRMS, and low pass filter

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • Measure up to 400 A with optional clamp probe adapter

  • testo 882 - Adjustable focus thermal imager (320x240 FPA)

    Order-Nr. 0560 0882 70

    The testo 882 is a feature rich thermal imager that can be used in a variety of thermography applications. With easy one handed operation, 32° adjustable focus lens, and Lens Protector, the testo 882 thermal imager is a versatile solution for a wide variety of thermal imaging applications.

    • 32° wide angle lens with 7“ minimum focal point

    • Solar mode identifies solar intensity values

    • SuperResolution technology enhances image quality to 640x480

    • TwinPix overlays IR image over real image

  • testo 460 - Tachometer

    Order-Nr. 0560 0460

    For carrying out non-contact rpm measurements, the testo 460 tachometer includes self-adhesive reflective markers, LED measurement spot marking, and further high-quality accessories.

    • Optical rpm measurements

    • LED measuring spot marking

    • Easy to read display / backlit for use in all lighting conditions

    • Comprehensive accessories: reflective markers / protective cap / belt bag

  • testo 750-3 - Digital Voltage Tester with GFCI Test

    Order-Nr. 0590 7503

    The 750-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit. The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

    The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • GFCI Test Function

    • 3-digit LCD showing the actual voltage
      measurements

    • Patented all-around viewable LED voltage bar indication

    • Built-in flashlight for testing in dark places

  • testo 750-2 - Digital Voltage Tester with GFCI Test

    Order-Nr. 0590 7502

    The testo 750-2 includes a single probe voltage tester, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit. The testo 750 vibrates ensuring that the GFCI circuit test is active.  The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • GFCI Test Function

    • Single probe voltage testing

    • Patented all-around viewable LED voltage bar indication

    • Phase sequence test for determining motor rotation and polarity detection for VDC measurements

  • testo 755-2 - Current / Voltage Meter with 200 A AC, 1000 V AC/DC, Continuity, and Phase Rotation Tester

    Order-Nr. 0590 7552

    The testo 755-2 includes important additional features: phase rotation, voltage range up to 1000V, and the unique feature which allows the user to check for voltage using only a single lead.  The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

    • Phase rotation tester and voltage range up to 1000 V

    • Unique feature which allows the user to check for voltage using only a single lead

    • Polarity detection for DC circuits

    • Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

  • testo 750-1 - Digital Voltage Tester

    Order-Nr. 0590 7501

    The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication.  All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • Patented all-around viewable LED voltage bar indication

    • 0 to 690 V AC/DC voltage measurement

    • Polarity detection for VDC measurements

    • Phase sequence test for determining motor rotation

  • testo 755-1 - Current / Voltage Meter with 200 A AC, 600 V AC/DC, and Continuity

    Order-Nr. 0590 7551

    The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

    • Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

    • Polarity detection for DC circuits

    • 3-phase sequence check with motor rotation indication

    • Single lead voltage test with audible indication

  • Surface Probe Short Term Range - Surface Probe Short Term Range

    Order-Nr. 0602 0393

    Stub type, uneven surface temperature probe with a Type K thermocouple connection. Probe is designed to be used for short term measurements.

    • Fast response time (3 seconds) thanks to the thermocouple strip

    • Thermocouple type K

    • Also suitable for uneven surfaces

    • Measuring range short-term up to +500°C

  • Waterproof Immersion Probe

    Order-Nr. 0602 1293

    A Type K Thermocouple waterproof immersion/penetration probe. This probe is capable of reading temperature values from -76.0° to 752.0 °F.

    • Thermocouple type K

    • Response time of 7 seconds

    • Waterproof

    • Measuring range: -60 to +400 °C

  • Temperature Probe with Magnet

    Order-Nr. 0602 4892

    Temperature probe with magnet for surface measurements on metal surfaces

    • Self-adhesive thanks to a magnet: probe for measuring surface temperature on metal surfaces

    • TC Type K temperature probe with 1.6 m cable

    • Measuring range: (-60 to 750 °F) -50 to +400 °C

  • Air Probe (Type K)

    Order-Nr. 0602 1793

    Air Probe with a Type K connection allows you to accurately measure air temperature. Compatible with any Testo product with a Type K connector, this Air Probe is a solution for a variety of temperature applications.

    • Thermocouple type K 

    • Short response time thanks to the exposed sensor 

    • Can be connected to a wide range of measuring instruments

    • Measuring range: -60 to +400 °C

  • Pipe Clamp Surface Probe

    Order-Nr. 0602 4592

    Pipe clamp probe for measuring pipes with a diameter of 0.2” to 2.5''.  Probe is capable of short term measurements of up to 536 °F.

    • Enables quick, easy attachment of the probe to pipes with a diameter of 0.2” to 2.5”

    • TC Type K temperature probe with 4 foot cable

    • Measuring range: -76 to 266 °F, briefly up to 536 °F

  • Fast-action TC immersion probe

    Order-Nr. 0602 0593

    Efficient and fast-action immersion probe, waterproof, T/C Type K

    • Short response time of 2 seconds

    • Very large measuring range: -60 to +1000 °C

    • Waterproof

    • Thermocouple type K

  • testo 875i-1 - Adjustable focus thermal imager (160 x 120 FPA)

    Order-Nr. 0563 0875 71

    The testo 875i-1 is a feature packed adjustable lens thermal imager. The 875i-1 is an ideal solution for for a variety of industrial applications including thermal imaging inspection, as well as solar panel inspection.

    • Solar mode identifies solar intensity values

    • SuperResolution Technology enhances image quality to 320 x 240

    • Automatic hot/cold spot recognition

    • Advanced report writing and image analysis with included software

77 Products found
Show More