Electrical measurement

30 products or recommendations for Electrical measurement
  • testo 770-3 - Hook clamp and power meter with Bluetooth

    Order-Nr. 0590 7703

    The testo 770-3, in addition to the features of the other meters in the testo 770 series, includes real-time power measurements (Watts), power factor, and Bluetooth. The Testo app can be used for remote viewing, monitoring, data logging, and creating reports. This powerful app allows you to create custom reports that include photos, data, and graphs that can be saved, or sent via email.

    • Unique hook-on function separates and grabs wires, without using your hands, and the retractable post makes hook release in tight spaces fast and easy

    • Bluetooth, coupled with the free testo Smart Probes app, works with smartphones and tablets for remote viewing, data logging, and report creation

    • Real-time power measurements (Watts), with simultaneous power factor indication  

    • μA parameter for flame rod (ignition flame sensor) testing, and temperature measurement using optional type K thermocouple adapter

  • testo 760-2 - Digital multimeter with type K and TRMS

    Order-Nr. 0590 7602

    In addition to the features of the testo 760-1, the testo 760-2 includes TRMS measurements, duty cycle, low pass filter, and temperature measuring functionalities.  Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-2 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • TRMS with low pass filter, duty cycle, and type K temperature measurement

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • Measure up to 400 A with optional clamp probe adapter

  • testo 745 - Non-contact voltage tester with built-in flashlight

    Order-Nr. 0590 7450

    The testo 745 non-contact voltage (NCV) tester quickly checks for the presence of voltage in AC powered systems.  It can be safely used up to 1000 V AC.  When AC voltage is detected, the testo 745 gives an indication, by flashing its red LED tip, and buzzing its internal audible buzzer.  You can easily determine the hot and neutral legs of an outlet, without the time consuming and risky removal of the outlet from the outlet box.

    • Two sensitivity levels, with audible and visual indication

    • Flashing LED indicates sensitivity range, down to 12 V AC, or standard range above 50 V AC

    • Differentiates hot from neutral in AC outlets

    • Low pass filter reduces false indications

  • testo 760-1 - Digital multimeter

    Order-Nr. 0590 7601

    Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-1 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • Meter prevents switching from V to A, or A to V, if the leads are not in the proper socket

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • 3 buttons that illuminate for easy and clear selection of test functions

  • testo 760-3 - Digital multimeter with type K, TRMS, and 1,000 V range

    Order-Nr. 0590 7603

    In addition to the features of the testo 760-2, the testo 760-3 has an AC/DC voltage measuring range of 1,000 V, and includes TRMS, duty cycle, low pass filter, and temperature measuring functionalities.  Testo’s exclusive auto-test setup enables the user to simply turn the unit on, connect the leads, and begin measuring.  The testo 760-3 digital multimeter detects the lead connection, and prevents switching from V to A, or A to V, if the leads are not in the proper socket.  This prevents accidentally blowing the meter’s fuse because of incorrect connections.

    • 1,000 V AC/DC voltage measuring range, TRMS, and low pass filter

    • Auto-test setup based upon lead connection prevents blown fuses in the meter

    • Meter automatically detects testing in-process, and selects the correct meter configuration, saving time and optimizing accuracy

    • Measure up to 400 A with optional clamp probe adapter

  • testo 770-1 - Hook clamp meter

    Order-Nr. 0590 7701

    The testo 770-1 hook clamp meter is ideally suited for electrical work in HVAC applications. Testo’s unique hooking clamp design can be used to separate and grab wires. The easy hook-off retractable post releases the wires when testing in tight spaces. You can safely work without using your hands.

    • Unique hook-on function separates and grabs wires, without using your hands

    • Retractable post makes hook release fast and easy

    • Inrush (starting) current capture, APO (Auto Power Off), and Min / Max / Hold

  • testo 750-3 - Digital Voltage Tester with GFCI Test

    Order-Nr. 0590 7503

    The 750-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit. The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

    The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • GFCI Test Function

    • 3-digit LCD showing the actual voltage
      measurements

    • Patented all-around viewable LED voltage bar indication

    • Built-in flashlight for testing in dark places

  • testo 770-2 - Hook clamp meter with thermocouple adapter

    Order-Nr. 0590 7702

    In addition to the standard functions of the testo 770-1 hook clamp meter, the testo 770-2 includes a thermocouple adapter, and measures microamps.

    • Unique hook-on function separates and grabs wires, without using your hands

    • Retractable post makes hook release fast and easy

    • μA for flame rod (ignition flame sensor) testing, and can measure temperature using type K thermocouple adapter

  • testo 750-2 - Digital Voltage Tester with GFCI Test

    Order-Nr. 0590 7502

    The testo 750-2 includes a single probe voltage tester, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit. The testo 750 vibrates ensuring that the GFCI circuit test is active.  The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • GFCI Test Function

    • Single probe voltage testing

    • Patented all-around viewable LED voltage bar indication

    • Phase sequence test for determining motor rotation and polarity detection for VDC measurements

  • testo 755-2 - Current / Voltage Meter with 200 A AC, 1000 V AC/DC, Continuity, and Phase Rotation Tester

    Order-Nr. 0590 7552

    The testo 755-2 includes important additional features: phase rotation, voltage range up to 1000V, and the unique feature which allows the user to check for voltage using only a single lead.  The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

    • Phase rotation tester and voltage range up to 1000 V

    • Unique feature which allows the user to check for voltage using only a single lead

    • Polarity detection for DC circuits

    • Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

  • testo 750-1 - Digital Voltage Tester

    Order-Nr. 0590 7501

    The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication.  All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

    • Patented all-around viewable LED voltage bar indication

    • 0 to 690 V AC/DC voltage measurement

    • Polarity detection for VDC measurements

    • Phase sequence test for determining motor rotation

  • testo 755-1 - Current / Voltage Meter with 200 A AC, 600 V AC/DC, and Continuity

    Order-Nr. 0590 7551

    The testo 755 current/voltage testers are fast and easy to use, especially when you are testing many circuits. The convenient open-jaw current tester automatically turns on when voltage exceeds 6V. It then auto-selects the correct parameters and range for your test. These rugged testers are suitable for virtually all your daily electrical measuring tasks.

    • Meter automatically detects testing in-process and selects correct meter configuration which saves time and optimizes accuracy

    • Polarity detection for DC circuits

    • 3-phase sequence check with motor rotation indication

    • Single lead voltage test with audible indication

  • Transport bag

    Order-Nr. 0590 0017

    You can securely store your electrical measuring instrument (testo 755 or testo 770) and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

    • Outside: impact-resistant transport bag with zip fastener

    • Inside: two mesh compartments

    • Dimensions: 270 x 150 x 75 mm

  • Transport bag

    Order-Nr. 0590 0016

    You can securely store the testo 760 digital multimeter and accessories in the robust transport bag with a hard outer shell. The two internal mesh compartments ensure the stored items are properly held in place.

    • Outside: impact-resistant transport bag with zip fastener

    • Inside: two mesh compartments

    • Dimensions: 215 x 150 x 70 mm

  • Clamp meter adapter - for non-contact current measurement

    Order-Nr. 0590 0003

    The clamp meter adapter means you can take advantage of non-contact current measurement (with the testo 760-2/-3 digital multimeter). The clamp meter adapter is particularly suitable for measurement on tightly packed power cables or conductors with a small diameter.

    • Fully retractable pincer arm – ideal for measurements in tight places

    • Direct / alternating current measurement up to 400 A AC/DC possible

    • Display of 1 mV per A

    • Overvoltage category CAT IV 600 V

  • Adapter for type K thermocouples

    Order-Nr. 0590 0021

    Use the thermocouple adapter when you want to attach a thermocouple temperature probe to your testo 770-2/-3 clamp meter.

    • For attaching type K thermocouple temperature probes

    • Measuring range -20 to +500°C

  • Standard measuring cables (angled plug) - tip Ø: 0.07 inch

    Order-Nr. 0590 0010

    Rubber-coated grips mean the standard measuring cables ensure a secure hold when measuring electrical parameters. The standard measuring cables can be attached to Testo clamp meters, Testo digital multimeters or other makes of multimeter.

    • CAT II 1000 V measurement category

    • Tip Ø: 0.07 in.; tip length: 0.7 in.

    • 1 set of measuring cables with angled plug

  • Safety crocodile clips - 1 set

    Order-Nr. 0590 0008

    Use the handy safety crocodile clips for easy measurement of electrical parameters. Simply put the measuring cables into the safety crocodile clip to carry out the measurement. This means your hands are free for other tasks.

    • CAT III 600 V measurement category

    • Maximum current: 10 A

    • For attachment onto Testo standard measuring cables (order-number 0590 0011; 0590 0012; 0590 0013; 0590 0014) or other makes of measuring cables

    • Delivery quantity: 1 set of safety crocodile clips

  • Magnetic suspension system for digital multimeters

    Order-Nr. 0590 0001

    This magnetic suspension system enables you to attach your testo 760 digital multimeter to systems in a really simple way.

    • Fast attachment of digital multimeters, e.g. onto switching cabinets

    • Both hands free for measurement thanks to the magnetic suspension system

30 Products found
Show More