Robust hot bulb probe, Ø 3 mm, with handle and telescopic ha... - Robust hot bulb probe, Ã˜ 0.12 in.

Order-Nr. 0635 1049

Where to buy

Non-directional flow measurement
Integrated temperature measurement
Robust (no moving/rotating element, no wear and tear)
Flow measuring range: 0 to +10 m/s

Robust hot bulb probe, Ø 3 mm, with handle and telescopic handle for measurements in the lower velocity range

Details

Product Description

Use the hot ball probe (thermal anemometer) to determine flow velocity and volume flow in ventilation ducts or at air outlets. For measurement at air outlets, we recommend that you use the hot ball probe in conjunction with the testo 445 measuring instrument and the testovent 410 or testovent 415 measurement funnel (all available to order in addition to the probe). The probe is particularly suitable for low flow velocities of up to +10 m/s – and also for non-directional flow measurement. The probe can also measure temperatures of up to +70 °C at the same time.

The hot ball probe is equipped with a telescope, which can be extended to a maximum length of 850 mm. With a diameter of just 3 mm, the probe is ideal for measurements in narrow, inaccessible places.

Delivery Scope

Hot ball probe (Ø 3 mm) with telescope (can be extended to 850 mm) including handle.

Technical Data

Temperature - NTC
Measuring range	-4.0° to 158.0 °F / -20 to +70 °C

Velocity - Hot wire anemometer
Measuring range	0 to +1969 fpm / 0 to +10 m/s
Accuracy	±(5.91 fpm + 5 % of mv) / ±(0.03 m/s + 5 % of mv)

General technical data
Diameter probe shaft tip	0.118 in. / 3 mm
Length telescope	33.465 in. / 850 mm

Downloads

Manuals

hot bulb probes 0635 1049 en,de (PDF, 36.8 kB)