testo 6447 compressed air counter for larger diameters, with... - Compressed air meter with interchangeable fitting

Order-Nr. 0699 6447

Where to buy

Transmitter with selectable signal outputs: analog output, pulse output, 2 switching outputs
Interchangeable fitting: probe can be removed under pressure (enabling versatile use at multiple measuring points)
Flexible mounting with measuring block, pipe clamp or as a measurement fitting
Easy operation with a variety of options (signal outputs, physical unit, etc.)

testo 6447 compressed air counter for larger diameters, with probe removal under pressure, selectable diameters DN65 (2 1/2)/DN80 (3)/DN100 (4)/DN125 (5)/DN150 (6)/DN200 (8)/DN250 (10), with analog, pulse and switch output

Details

Product Description

In industrial companies, compressed air is an important source of energy, but one which can also incur high costs. Precise measuring and control technology creates transparency when it comes to compressed air consumption and can help you save energy, reduce costs and implement a targeted environmental management system (e.g. as per ISO 50.001 or ISO 14.001).
The testo 6447 compressed air meter enables you to carry out accurate compressed air consumption measurements, consumption and leak monitoring and flow measurements in your compressed air system. The compressed air meter can also be used to carry out a peak load analysis in order to determine whether you are generating compressed air of sufficient capacity. Overall, these measures can help you find potential for savings or prevent unnecessary investment costs.

Overview of the technical advantages offered by the testo 6447 compressed air meter

The testo 6447 compressed air meter is also a transmitter, which converts the measured parameter into a standardized electrical signal. The transmitter can therefore be integrated into systems (e.g. compressed air systems), making it a key instrument in measuring and control technology. The testo 6447 compressed air meter also offers the following advantages:

Ultimate flexibility with a variety of signal outputs: analog output, pulse output, 2 switching outputs. You will therefore be equipped for any kind of application, whether that is consumption measurement, consumption or leak monitoring or even flow measurement
Probe removal under pressure: the impressive interchangeable fitting solution makes this possible
Integrated totalling function: the practical totaliser means that no additional analysis units are needed to calculate the total consumption
Flexible mounting: with measuring block, pipe clamp or as a measurement fitting
Ultimate accuracy: the compressed air meter is available in various sizes (notably larger pipe diameters are covered: DN65-250). At any size the inner diameter is precisely defined, enabling standard volume flow adjustment. You can therefore achieve a high degree of measuring accuracy – particularly in comparison with standard penetration probes, which deduce volume flow on the basis of measured flow and specified pipe diameter and are therefore prone to greater vulnerability to error
Easy operation with a high degree of flexibility: parametrization of signal outputs, switching of physical units, signal delay, signal attenuation are all possible
Measurement according to the calorimetric principle: no pressure loss during measurement
Other advantages: no temperature compensation required, quick response time, robust sensor, optimized accuracy thanks to integrated inflow and outflow sections

Delivery Scope

testo 6447 compressed air meter for large pipe diameters, probe removal under pressure via interchangeable fitting, selectable diameters DN65 (2 ½") / DN80 (3") / DN100 (4") / DN125 (5") / DN150 (6") / DN200 (8") / DN250 (10"), with analog, pulse and switching output.