Image
  1. Home
  2. testo gas detector
0632 0323

testo gas detector - Gas detector

testo gas detector
testo gas detector incl. flexible probe extenstion, rechargeable battery and mains unit for mains operation and battery recharging, with calibration protocol
  • Gas detector for methane, propane and hydrogen gases
  • Flexible probe extension for inaccessible areas
  • Acoustic signals on approaching the lower explosive limit
  • With alarm function: continuous tone and indication on the display on reaching the explosive limit
According to DVGW leaflet G 465-4, gas detectors are approved for above-ground gas detection up to the "lower explosive limit (LEL)". Testo's gas detector is a multi-range gas detector for the gas types methane, propane and hydrogen. Gas concentrations are measured by the semi-conductor sensor in the ppm range and are shown in the display with a resolution of 1 ppm.

General technical data

Weight
11 oz. / 320 g
Reaction time
t90 2 - 3 sec
Dimensions
7 x 2 x 1 in. / 190 x 40 x 28 mm
Operating temperature
5° to 104 °F / -15 to +40 °C
Heat up time
40 sec
Battery type
NiMH battery, 1600 mAh
Battery life
> 8 h
Display type
ppm display
Storage temperature
-13° to 158 °F / -25 to +70 °C

Methane (CHâ‚„)

Measuring range
0.1 to 4 Vol.%
10 to 999 ppm
Resolution
1 ppm / 0.1 Vol.%
Lower response threshold
10 ppm

Propane (C₃H₈)

Measuring range
0.1 to 1.9 Vol.%
10 to 999 ppm
Resolution
1 ppm / 0.1 Vol.%
Lower response threshold
10 ppm
testo gas detector, including flexible probe extension, rechargeable battery and mains unit for mains operation and charging the battery, along with calibration protocol.

Headquarters
Testo Inc.
40 White Lake Road
07871Sparta
New Jersey
800-227-0729

© 2026